Re: [PATCH v5, 0/8] Support H264 multi-core encoder on MT8195

From: Irui Wang
Date: Mon Aug 08 2022 - 22:14:38 EST


Dear Nicolas,

Sorry for late, we have tested this change by chrome tast test before:

tast run $IP video.PlatformEncoding.v4l2_h264*

here are the average fps results:
Before:
180p: 1913
180_meet: 1935

360p: 554
360_meet: 571

720p: 159
720_meet: 189

After:
180p: 2236
180_meet: 2337

360p: 820
360_meet: 830

720p: 324
720_meet: 390

Thanks
BRs
On Fri, 2022-07-29 at 11:08 -0400, Nicolas Dufresne wrote:
> Hi Irui,
>
> Le vendredi 29 juillet 2022 à 11:51 +0800, Irui Wang a écrit :
> > MT8195 has two H264 encoder hardware, named core0 and core1, this
> > two
> > cores can encode two input frames separately at the same time to
> > achieve
> > higher performance.
>
> I suspect you could provide some performance numbers on that specific
> HW before
> and after your change ? This could help integrator regarding what
> type of gain
> they can expect of back-porting this feature. This is not strictly
> mandatory
> though.
>
> >
> > This series of patches are used to enable the two H264 encoder
> > cores,
> > the difference between encoding process before and after enable two
> > cores is just like as below:
> > As-Is: Synchronous
> > V4L2_VIDIOC_QBUF#0 --> device_run(triger encoder) --> wait encoder
> > IRQ
> > -->
> > encoding done with result --> job_finish
> > V4l2_VIDIOC_QBUF#1 --> device_run(triger encoder) --> wait encoder
> > IRQ
> > -->
> > encoding done with result --> job_finish
> > ...
> > To-Be: Asynchronous
> > V4L2_VIDIOC_QBUF#0 --> device_run(triger encoder) --> job_finish
> > ..V4l2_VIDIOC_QBUF#1 --> device_run(triger encoder) --> job_finish
> > (venc core0 may encode done here, done the encoding result to
> > client)
> > V4L2_VIDIOC_QBUF#2 --> device_run(triger encoder) --> job_finish.
> >
> > ---
> > changes compared with v4:
> > - reabse to the newer linux media stage tree.
> > - remove "mediatek,venc-multi-core" property since sub-device can
> > be probed by of_platform_populate api directly.
> > - some modifications for patch v4's review comments.
> >
> > changes compared with v3:
> > - rebase to the newer linux media stage.
> > - add a capability to indicate scp firmware support multi-core.
> > - probe core0 as main device, core1 as sub-device.
> >
> > changes compared with v2:
> > - update venc core dt-bindings, add two new properties for current
> > usage.
> > - parse venc multi_core mode from device tree.
> > - rebase to the newer linux media stage.
> >
> > changes compared with v1:
> > - of_platform_populate was used in place of the component
> > framework.
> > - new yaml file for venc cores.
> > - some modifications for patch v1's review comments.
> > ---
> >
> > Irui Wang (8):
> > dt-bindings: media: mediatek: vcodec: Adds encoder cores dt-
> > bindings
> > for mt8195
> > media: mediatek: vcodec: Enable venc dual core usage
> > media: mediatek: vcodec: Refactor venc power manage function
> > media: mediatek: vcodec: Add more extra processing for multi-core
> > encoding
> > media: mediatek: vcodec: Add venc power on/off function
> > media: mediatek: vcodec: Refactor encoder clock on/off function
> > media: mediatek: vcodec: Add multi-core encoding process
> > media: mediatek: vcodec: Return encoding result in asynchronous
> > mode
> >
> > .../media/mediatek,vcodec-encoder-core.yaml | 218
> > ++++++++++++++++
> > .../media/mediatek,vcodec-encoder.yaml | 1 -
> > .../media/platform/mediatek/vcodec/Makefile | 4 +-
> > .../platform/mediatek/vcodec/mtk_vcodec_drv.h | 28 +-
> > .../platform/mediatek/vcodec/mtk_vcodec_enc.c | 113 ++++++--
> > .../platform/mediatek/vcodec/mtk_vcodec_enc.h | 11 +-
> > .../mediatek/vcodec/mtk_vcodec_enc_drv.c | 44 +++-
> > .../mediatek/vcodec/mtk_vcodec_enc_hw.c | 156 +++++++++++
> > .../mediatek/vcodec/mtk_vcodec_enc_hw.h | 34 +++
> > .../mediatek/vcodec/mtk_vcodec_enc_pm.c | 178 +++++++++++--
> > .../mediatek/vcodec/mtk_vcodec_enc_pm.h | 11 +-
> > .../mediatek/vcodec/mtk_vcodec_util.c | 19 ++
> > .../mediatek/vcodec/mtk_vcodec_util.h | 3 +
> > .../mediatek/vcodec/venc/venc_h264_if.c | 243
> > ++++++++++++++----
> > .../mediatek/vcodec/venc/venc_vp8_if.c | 3 +-
> > .../platform/mediatek/vcodec/venc_drv_if.c | 75 ++++--
> > .../platform/mediatek/vcodec/venc_drv_if.h | 6 +
> > .../platform/mediatek/vcodec/venc_vpu_if.c | 9 +-
> > .../platform/mediatek/vcodec/venc_vpu_if.h | 3 +-
> > 19 files changed, 1028 insertions(+), 131 deletions(-)
> > create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,vcodec-encoder-
> > core.yaml
> > create mode 100644
> > drivers/media/platform/mediatek/vcodec/mtk_vcodec_enc_hw.c
> > create mode 100644
> > drivers/media/platform/mediatek/vcodec/mtk_vcodec_enc_hw.h
> >
>
>