Re: [PATCH 7/8] remoteproc: qcom: Add support for memory sandbox
From: Srinivasa Rao Mandadapu
Date: Tue Aug 09 2022 - 04:22:44 EST
On 8/7/2022 2:04 AM, Dmitry Baryshkov wrote:
Thanks for your time and Valuable inputs Dmitry!!!
On 03/08/2022 17:21, Srinivasa Rao Mandadapu wrote:
Add memory sandbox support for ADSP based platforms secure booting.
This repeats commit subject. Please replace it with proper commit
message text describing what is done and why.
Okay. Will update it.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
---
drivers/remoteproc/qcom_q6v5_adsp.c | 101
+++++++++++++++++++++++++++++++++++-
1 file changed, 99 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c
b/drivers/remoteproc/qcom_q6v5_adsp.c
index 3dbd035..f81da47 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -9,6 +9,7 @@
#include <linux/firmware.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iommu.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
@@ -48,6 +49,8 @@
#define LPASS_PWR_ON_REG 0x10
#define LPASS_HALTREQ_REG 0x0
+#define SID_MASK_DEFAULT 0xF
+
#define QDSP6SS_XO_CBCR 0x38
#define QDSP6SS_CORE_CBCR 0x20
#define QDSP6SS_SLEEP_CBCR 0x3c
@@ -77,7 +80,7 @@ struct adsp_pil_data {
struct qcom_adsp {
struct device *dev;
struct rproc *rproc;
-
+ struct iommu_domain *iommu_dom;
struct qcom_q6v5 q6v5;
struct clk *xo;
@@ -332,6 +335,91 @@ static int adsp_load(struct rproc *rproc, const
struct firmware *fw)
return 0;
}
+static int adsp_map_smmu(struct qcom_adsp *adsp, struct rproc *rproc)
+{
+ struct of_phandle_args args;
+ int ret, rc, i;
+ long long sid;
+
+ unsigned long mem_phys;
+ unsigned long iova;
+ const __be32 *prop;
+ int access_level;
+ uint32_t len, flag, mem_size;
+ int offset;
+ struct fw_rsc_hdr *hdr;
+ struct fw_rsc_devmem *rsc_fw;
+
+ rc = of_parse_phandle_with_fixed_args(adsp->dev->of_node,
"iommus", 1, 0, &args);
Please do not add implicit dependency on #iommu-cells value.
Okay. Will change it to "of_parse_phandle_with_args()"
+ if (rc < 0)
+ sid = -1;
+ else
+ sid = args.args[0] & SID_MASK_DEFAULT;
+
+ adsp->iommu_dom = iommu_domain_alloc(&platform_bus_type);
please use adsp->dev->bus instead of platform_bus_type here.
Okay. will update it.
+ if (!adsp->iommu_dom) {
+ dev_err(adsp->dev, "failed to allocate iommu domain\n");
+ return -ENOMEM;
+ }
+
+ ret = iommu_attach_device(adsp->iommu_dom, adsp->dev);
+ if (ret) {
+ dev_err(adsp->dev, "could not attach device ret = %d\n", ret);
+ return -EBUSY;
+ }
+
+ /* Add SID configuration for ADSP Firmware to SMMU */
+ adsp->mem_phys = adsp->mem_phys | (sid << 32);
+
+ ret = iommu_map(adsp->iommu_dom, adsp->mem_phys, adsp->mem_phys,
+ adsp->mem_size, IOMMU_READ | IOMMU_WRITE);
+ if (ret) {
+ dev_err(adsp->dev, "Unable to map ADSP Physical Memory\n");
+ return ret;
+ }
+
+ prop = of_get_property(adsp->dev->of_node, "qcom,adsp-memory",
&len);
Non-documented property. So, this chunk is not acceptable.
Okay. Will add it in dt-bindings too.
+ if (prop) {
+ len /= sizeof(__be32);
+ for (i = 0; i < len; i++) {
+ iova = be32_to_cpu(prop[i++]);
+ mem_phys = be32_to_cpu(prop[i++]);
+ mem_size = be32_to_cpu(prop[i++]);
+ access_level = be32_to_cpu(prop[i]);
+
+ if (access_level)
+ flag = IOMMU_READ | IOMMU_WRITE;
+ else
+ flag = IOMMU_READ;
+
+ ret = iommu_map(adsp->iommu_dom, iova, mem_phys,
mem_size, flag);
+ if (ret) {
+ dev_err(adsp->dev, "failed to map addr = %p mem_size
= %x\n",
+ &(mem_phys), mem_size);
+ return ret;
+ }
+ }
+ } else {
+ if (!rproc->table_ptr)
+ return 0;
+
+ for (i = 0; i < rproc->table_ptr->num; i++) {
+ offset = rproc->table_ptr->offset[i];
+ hdr = (void *)rproc->table_ptr + offset;
+ rsc_fw = (struct fw_rsc_devmem *)hdr + sizeof(*hdr);
+
+ ret = iommu_map(rproc->domain, rsc_fw->da, rsc_fw->pa,
+ rsc_fw->len, rsc_fw->flags);
What about filling an sgtable instead and using it?
Here we are just doing IO mapping and allowing ADSP to access the
specified memory.
I am not sure, sg_table applicable here or not as it's not any DMA
activity.
Please correct me if my understanding is not enough and It would help me
a lot, if any good example shared.
+ if (ret) {
+ pr_err("%s; unable to map adsp memory address\n",
__func__);
+ return ret;
+ }
+ }
+ }
+ return 0;
+}
+
+
static int adsp_start(struct rproc *rproc)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
@@ -341,7 +429,13 @@ static int adsp_start(struct rproc *rproc)
ret = qcom_q6v5_prepare(&adsp->q6v5);
if (ret)
return ret;
-
+ if (!adsp->is_wpss) {
+ ret = adsp_map_smmu(adsp, rproc);
Is this also applicable to cDSP? To sdm845 adsp?
It's applicable to all ADSP SoC variants. I think it's better to add
adsp flag("is_adsp") for
distinguishing adsp use cases. Please suggest here.
+ if (ret) {
+ dev_err(adsp->dev, "ADSP smmu mapping failed\n");
+ goto adsp_smmu_unmap;
+ }
+ }
ret = clk_prepare_enable(adsp->xo);
if (ret)
goto disable_irqs;
@@ -402,6 +496,9 @@ static int adsp_start(struct rproc *rproc)
clk_disable_unprepare(adsp->xo);
disable_irqs:
qcom_q6v5_unprepare(&adsp->q6v5);
+adsp_smmu_unmap:
+ iommu_unmap(adsp->iommu_dom, adsp->mem_phys, adsp->mem_size);
+ iommu_domain_free(adsp->iommu_dom);
return ret;
}