[PATCH] mmc: sunxi-mmc: Fix clock refcount imbalance during unbind

[Samuel Holland]

If the controller is suspended by runtime PM, the clock is already
disabled, so do not try to disable it again during removal. Use
pm_runtime_disable() to flush any pending runtime PM transitions.

Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---

 drivers/mmc/host/sunxi-mmc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index b16e12e62e72..3db9f32d6a7b 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1492,9 +1492,11 @@ static int sunxi_mmc_remove(struct platform_device *pdev)
 	struct sunxi_mmc_host *host = mmc_priv(mmc);
 
 	mmc_remove_host(mmc);
-	pm_runtime_force_suspend(&pdev->dev);
-	disable_irq(host->irq);
-	sunxi_mmc_disable(host);
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev)) {
+		disable_irq(host->irq);
+		sunxi_mmc_disable(host);
+	}
 	dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
 	mmc_free_host(mmc);
 
-- 
2.35.1