[PATCH 3/5] phy: qcom: edp: Perform lane configuration
From: Bjorn Andersson
Date: Wed Aug 10 2022 - 00:06:16 EST
The TRANSCIEVER_BIAS_EN, HIGHZ_DRVR_EN and PHY_CFG_1 registers are used
for lane configuration, with the currently hard coded configuration
being a mix of 2 and 4 lane (effectively 2-lane).
Properly implement lane configuration for 1, 2 and 4 lanes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-edp.c | 32 ++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 41aa28291cea..32614fb838b5 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -315,9 +315,11 @@ static int qcom_edp_set_vco_div(const struct qcom_edp *edp)
static int qcom_edp_phy_power_on(struct phy *phy)
{
const struct qcom_edp *edp = phy_get_drvdata(phy);
+ u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
int timeout;
int ret;
u32 val;
+ u8 cfg1;
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
@@ -398,11 +400,31 @@ static int qcom_edp_phy_power_on(struct phy *phy)
writel(0x1f, edp->tx0 + TXn_TX_DRV_LVL);
writel(0x1f, edp->tx1 + TXn_TX_DRV_LVL);
- writel(0x4, edp->tx0 + TXn_HIGHZ_DRVR_EN);
- writel(0x3, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
- writel(0x4, edp->tx1 + TXn_HIGHZ_DRVR_EN);
- writel(0x0, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
- writel(0x3, edp->edp + DP_PHY_CFG_1);
+ if (edp->dp_opts.lanes == 1) {
+ bias0_en = 0x01;
+ bias1_en = 0x00;
+ drvr0_en = 0x06;
+ drvr1_en = 0x07;
+ cfg1 = 0x1;
+ } else if (edp->dp_opts.lanes == 2) {
+ bias0_en = 0x03;
+ bias1_en = 0x00;
+ drvr0_en = 0x04;
+ drvr1_en = 0x07;
+ cfg1 = 0x3;
+ } else {
+ bias0_en = 0x03;
+ bias1_en = 0x03;
+ drvr0_en = 0x04;
+ drvr1_en = 0x04;
+ cfg1 = 0xf;
+ }
+
+ writel(drvr0_en, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+ writel(bias0_en, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+ writel(bias1_en, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+ writel(cfg1, edp->edp + DP_PHY_CFG_1);
writel(0x18, edp->edp + DP_PHY_CFG);
usleep_range(100, 1000);
--
2.35.1