Re: [PATCH v2 2/3] mtd: spi-nor: add SFDP fixups for Quad Page Program
From: Tudor.Ambarus
Date: Wed Aug 10 2022 - 04:25:48 EST
On 8/10/22 11:06, Tudor.Ambarus@xxxxxxxxxxxxx wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 8/9/22 23:14, Sudip Mukherjee wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> SFDP table of some flash chips do not advertise support of Quad Input
>> Page Program even though it has support. Use fixup flags and add hardware
>> cap for these chips.
>>
>> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>
>> ---
>> drivers/mtd/spi-nor/core.c | 9 +++++++++
>> drivers/mtd/spi-nor/core.h | 2 ++
>> 2 files changed, 11 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
>> index f2c64006f8d7..7542404332a5 100644
>> --- a/drivers/mtd/spi-nor/core.c
>> +++ b/drivers/mtd/spi-nor/core.c
>> @@ -1962,6 +1962,12 @@ spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
>> if (nor->flags & SNOR_F_BROKEN_RESET)
>> *hwcaps &= ~(SNOR_HWCAPS_X_X_X | SNOR_HWCAPS_X_X_X_DTR);
>>
>> + if (nor->flags & SNOR_F_HAS_QUAD_PP) {
>> + *hwcaps |= SNOR_HWCAPS_PP_1_1_4;
>> + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP_1_1_4],
>> + SPINOR_OP_PP_1_1_4, SNOR_PROTO_1_1_4);
>> + }
>
> setting SPINOR_OP_PP_1_1_4 should be done in spi_nor_late_init_params().
> spi_nor_late_init_params() is used to adjust the ops supported by the flash
^ s/spi_nor_late_init_params/spi_nor_spimem_adjust_hwcaps
> with the ones supported by the controller.
>
>> +
>> for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
>> int rdidx, ppidx;
>>
>> @@ -2446,6 +2452,9 @@ static void spi_nor_init_fixup_flags(struct spi_nor *nor)
>>
>> if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
>> nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
>> +
>> + if (fixup_flags & SPI_NOR_QUAD_PP)
>> + nor->flags |= SNOR_F_HAS_QUAD_PP;
>> }
>>
>> /**
>> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
>> index 85b0cf254e97..7dbdf16a67b4 100644
>> --- a/drivers/mtd/spi-nor/core.h
>> +++ b/drivers/mtd/spi-nor/core.h
>> @@ -130,6 +130,7 @@ enum spi_nor_option_flags {
>> SNOR_F_IO_MODE_EN_VOLATILE = BIT(11),
>> SNOR_F_SOFT_RESET = BIT(12),
>> SNOR_F_SWP_IS_VOLATILE = BIT(13),
>> + SNOR_F_HAS_QUAD_PP = BIT(14),
>
> you won't need this
>> };
>>
>> struct spi_nor_read_command {
>> @@ -520,6 +521,7 @@ struct flash_info {
>> u8 fixup_flags;
>> #define SPI_NOR_4B_OPCODES BIT(0)
>> #define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1)
>> +#define SPI_NOR_QUAD_PP BIT(2)
>
> No, as I previously said, SPI_NOR_QUAD_PP should be declared as a
> info->flags, not as info->fixup_flags.
>
>>
>> u8 mfr_flags;
>>
>> --
>> 2.30.2
>>
>
>
> --
> Cheers,
> ta
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
--
Cheers,
ta