Re: [PATCH v3 1/4] dt-bindings: media: platform: visconti: Add Toshiba Visconti Video Input Interface bindings
From: Rob Herring
Date: Wed Aug 10 2022 - 11:38:15 EST
On Wed, Aug 10, 2022 at 10:28:19PM +0900, Yuji Ishikawa wrote:
> Adds the Device Tree binding documentation that allows to describe
> the Video Input Interface found in Toshiba Visconti SoCs.
>
> Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@xxxxxxxxxxxxx>
> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> ---
> Chengelog v2:
> - no change
>
> Changelog v3:
> - no change
> ---
> .../bindings/media/toshiba,visconti-viif.yaml | 103 ++++++++++++++++++
> 1 file changed, 103 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml b/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> new file mode 100644
> index 000000000..848ea5019
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/toshiba,visconti-viif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba Visconti5 SoC Video Input Interface Device Tree Bindings
> +
> +maintainers:
> + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> +
> +description: |
Don't need '|' if no formatting.
> + Toshiba Visconti5 SoC Video Input Interface (VIIF) receives MIPI CSI2 video stream,
> + processes the stream with embedded image signal processor (L1ISP, L2ISP), then stores pictures to main memory.
Wrap lines at 80 char.
> +
> +properties:
> + compatible:
> + const: toshiba,visconti-viif
> +
> + reg:
> + items:
> + - description: registers for capture control
> + - description: registers for CSI2 receiver control
> +
> + interrupts:
> + items:
> + - description: Sync Interrupt
> + - description: Status (Error) Interrupt
> + - description: CSI2 Receiver Interrupt
> + - description: L1ISP Interrupt
> +
> + index:
> + enum: [0, 1]
No, we don't do indices in DT. Why do you need this?
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: Input port node, single endpoint describing the CSI-2 transmitter.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description: VIIF supports 2 or 4 data lines
> + items:
> + minItems: 1
> + maxItems: 4
> + items:
> + - const: 1
> + - const: 2
> + - const: 3
> + - const: 4
blank line
> + clock-lanes:
> + description: VIIF supports 1 clock line
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + viif0: viif@1c000000 {
Drop unused labels.
> + compatible = "toshiba,visconti-viif";
> + reg = <0 0x1c000000 0 0x6000>,
> + <0 0x1c008000 0 0x400>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> + index = <0>;
> + status = "disabled";
Why is your example disabled? Don't put 'status' in examples.
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + csi_in0: endpoint {
> + remote-endpoint = <&imx219_out0>;
> + bus-type = <4>;
> + data-lanes = <1 2>;
> + clock-lanes = <0>;
> + clock-noncontinuous;
> + link-frequencies = /bits/ 64 <456000000>;
> + };
> + };
> + };
> + };
> +
> --
> 2.17.1
>
>
>