Re: [PATCH v3] drm/msm/dp: check hpd_state before push idle pattern at dp_bridge_disable()

[Stephen Boyd]

Quoting Kuogee Hsieh (2022-08-10 16:57:51)
>
> On 8/10/2022 3:22 PM, Stephen Boyd wrote:
> > Quoting Kuogee Hsieh (2022-08-10 12:25:51)
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> >> index b36f8b6..678289a 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >> @@ -1729,10 +1729,20 @@ void dp_bridge_disable(struct drm_bridge *drm_bridge)
> >>          struct msm_dp_bridge *dp_bridge = to_dp_bridge(drm_bridge);
> >>          struct msm_dp *dp = dp_bridge->dp_display;
> >>          struct dp_display_private *dp_display;
> >> +       u32 state;
> >>
> >>          dp_display = container_of(dp, struct dp_display_private, dp_display);
> >>
> >> +       mutex_lock(&dp_display->event_mutex);
> >> +
> >> +       state = dp_display->hpd_state;
> >> +       if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) {
> > It's concerning that we have to check this at all. Are we still
> > interjecting into the disable path when the cable is disconnected?
>
> yes,
>
> The problem is not from cable disconnected.
>
> There is a corner case that this function is called at drm shutdown
> (drm_release).
>
> At that time, mainlink is not enabled, hence dp_ctrl_push_idle() will
> cause system crash.

The mainlink is only disabled when the cable is disconnected though?

Let me put it this way, if we have to check that the state is
"connected" or "disconnected pending" in the disable path then there's
an issue where this driver is being called in unexpected ways. This
driver is fighting the drm core each time there's a state check. We
really need to get rid of the state tracking entirely, and make sure
that the drm core is calling into the driver at the right time, i.e.
bridge disable is only called when the mainlink is enabled, etc.