Re: [syzbot] linux-next boot error: BUG: unable to handle kernel paging request in kernel_execve
From: Ira Weiny
Date: Thu Aug 11 2022 - 13:40:09 EST
On Thu, Aug 11, 2022 at 08:33:16AM -0700, Kees Cook wrote:
> Hi Fabio,
>
> It seems likely that the kmap change[1] might be causing this crash. Is
> there a boot-time setup race between kmap being available and early umh
> usage?
I don't see how this is a setup problem with the config reported here.
CONFIG_64BIT=y
...and HIGHMEM is not set.
...and PREEMPT_RT is not set.
So the kmap_local_page() call in that stack should be a page_address() only.
I think the issue must be some sort of race which was being prevented because
of the preemption and/or pagefault disable built into kmap_atomic().
Is this reproducable?
The hunk below will surely fix it but I think the pagefault_disable() is
the only thing that is required. It would be nice to test it.
Ira
diff --git a/fs/exec.c b/fs/exec.c
index b51dd14e7388..3da588c858ca 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -640,7 +640,11 @@ int copy_string_kernel(const char *arg, struct linux_binprm *bprm)
if (!page)
return -E2BIG;
flush_arg_page(bprm, pos & PAGE_MASK, page);
+ preempt_disable();
+ pagefault_disable();
memcpy_to_page(page, offset_in_page(pos), arg, bytes_to_copy);
+ pagefault_enable();
+ preempt_enable();
put_arg_page(page);
}
>
> -Kees
>
> [1] https://git.kernel.org/linus/c6e8e36c6ae4b11bed5643317afb66b6c3cadba8
>
> On Thu, Aug 11, 2022 at 12:29:34AM -0700, syzbot wrote:
> > Hello,
> >
> > syzbot found the following issue on:
> >
> > HEAD commit: bc6c6584ffb2 Add linux-next specific files for 20220810
> > git tree: linux-next
> > console output: https://syzkaller.appspot.com/x/log.txt?x=115034c3080000
> > kernel config: https://syzkaller.appspot.com/x/.config?x=5784be4315a4403b
> > dashboard link: https://syzkaller.appspot.com/bug?extid=3250d9c8925ef29e975f
> > compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
> >
> > IMPORTANT: if you fix the issue, please add the following tag to the commit:
> > Reported-by: syzbot+3250d9c8925ef29e975f@xxxxxxxxxxxxxxxxxxxxxxxxx
> >
> > BUG: unable to handle page fault for address: ffffdc0000000000
> > #PF: supervisor read access in kernel mode
> > #PF: error_code(0x0000) - not-present page
> > PGD 11826067 P4D 11826067 PUD 0
> > Oops: 0000 [#1] PREEMPT SMP KASAN
> > CPU: 0 PID: 1100 Comm: kworker/u4:5 Not tainted 5.19.0-next-20220810-syzkaller #0
> > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
> > RIP: 0010:strnlen+0x3b/0x70 lib/string.c:504
> > Code: 74 3c 48 bb 00 00 00 00 00 fc ff df 49 89 fc 48 89 f8 eb 09 48 83 c0 01 48 39 e8 74 1e 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 <0f> b6 14 1a 38 ca 7f 04 84 d2 75 11 80 38 00 75 d9 4c 29 e0 48 83
> > RSP: 0000:ffffc90005c5fe10 EFLAGS: 00010246
> > RAX: ffff000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
> > RDX: 1fffe00000000000 RSI: 0000000000020000 RDI: ffff000000000000
> > RBP: ffff000000020000 R08: 0000000000000005 R09: 0000000000000000
> > R10: 0000000000000006 R11: 0000000000000000 R12: ffff000000000000
> > R13: ffff88814764cc00 R14: ffff000000000000 R15: ffff88814764cc00
> > FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: ffffdc0000000000 CR3: 000000000bc8e000 CR4: 00000000003506f0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > Call Trace:
> > <TASK>
> > strnlen include/linux/fortify-string.h:119 [inline]
> > copy_string_kernel+0x26/0x250 fs/exec.c:616
> > copy_strings_kernel+0xb3/0x190 fs/exec.c:655
> > kernel_execve+0x377/0x500 fs/exec.c:1998
> > call_usermodehelper_exec_async+0x2e3/0x580 kernel/umh.c:112
> > ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
> > </TASK>
> > Modules linked in:
> > CR2: ffffdc0000000000
> > ---[ end trace 0000000000000000 ]---
> > RIP: 0010:strnlen+0x3b/0x70 lib/string.c:504
> > Code: 74 3c 48 bb 00 00 00 00 00 fc ff df 49 89 fc 48 89 f8 eb 09 48 83 c0 01 48 39 e8 74 1e 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 <0f> b6 14 1a 38 ca 7f 04 84 d2 75 11 80 38 00 75 d9 4c 29 e0 48 83
> > RSP: 0000:ffffc90005c5fe10 EFLAGS: 00010246
> > RAX: ffff000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
> > RDX: 1fffe00000000000 RSI: 0000000000020000 RDI: ffff000000000000
> > RBP: ffff000000020000 R08: 0000000000000005 R09: 0000000000000000
> > R10: 0000000000000006 R11: 0000000000000000 R12: ffff000000000000
> > R13: ffff88814764cc00 R14: ffff000000000000 R15: ffff88814764cc00
> > FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: ffffdc0000000000 CR3: 000000000bc8e000 CR4: 00000000003506f0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > ----------------
> > Code disassembly (best guess):
> > 0: 74 3c je 0x3e
> > 2: 48 bb 00 00 00 00 00 movabs $0xdffffc0000000000,%rbx
> > 9: fc ff df
> > c: 49 89 fc mov %rdi,%r12
> > f: 48 89 f8 mov %rdi,%rax
> > 12: eb 09 jmp 0x1d
> > 14: 48 83 c0 01 add $0x1,%rax
> > 18: 48 39 e8 cmp %rbp,%rax
> > 1b: 74 1e je 0x3b
> > 1d: 48 89 c2 mov %rax,%rdx
> > 20: 48 89 c1 mov %rax,%rcx
> > 23: 48 c1 ea 03 shr $0x3,%rdx
> > 27: 83 e1 07 and $0x7,%ecx
> > * 2a: 0f b6 14 1a movzbl (%rdx,%rbx,1),%edx <-- trapping instruction
> > 2e: 38 ca cmp %cl,%dl
> > 30: 7f 04 jg 0x36
> > 32: 84 d2 test %dl,%dl
> > 34: 75 11 jne 0x47
> > 36: 80 38 00 cmpb $0x0,(%rax)
> > 39: 75 d9 jne 0x14
> > 3b: 4c 29 e0 sub %r12,%rax
> > 3e: 48 rex.W
> > 3f: 83 .byte 0x83
> >
> >
> > ---
> > This report is generated by a bot. It may contain errors.
> > See https://goo.gl/tpsmEJ for more information about syzbot.
> > syzbot engineers can be reached at syzkaller@xxxxxxxxxxxxxxxx.
> >
> > syzbot will keep track of this issue. See:
> > https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> --
> Kees Cook