Re: [PATCH 0/6] libsas and drivers: NCQ error handling

[Damien Le Moal]

On 2022/08/11 11:54, Damien Le Moal wrote:
> On 2022/07/22 4:24, John Garry wrote:
>> As reported in [0], the pm8001 driver NCQ error handling more or less
>> duplicates what libata does in link error handling, as follows:
>> - abort all commands
>> - do autopsy with read log ext 10 command
>> - reset the target to recover
>>
>> Indeed for the hisi_sas driver we want to add similar handling for NCQ
>> errors.
>>
>> This series add a new libsas API - sas_ata_link_abort() - to handle host
>> NCQ errors, and fixes up pm8001 and hisi_sas drivers to use it. As
>> mentioned in the pm8001 changeover patch, I would prefer a better place to
>> locate the SATA ABORT command (rather that nexus reset callback).
>>
>> I would appreciate some testing of the pm8001 change as the read log ext10
>> command mostly hangs on my arm64 machine - these arm64 hangs are a known
>> issue.
> 
> I applied this series on top of the current Linus tree and ran some tests: a
> bunch of fio runs and also ran libzbc test suites on a SATA SMR drive as that
> generates many command failures. No problems detected, the tests all pass.
> FYI, messages for failed commands look like this:
> 
> pm80xx0:: mpi_sata_event 2685: SATA EVENT 0x23
> sas: Enter sas_scsi_recover_host busy: 1 failed: 1
> sas: sas_scsi_find_task: aborting task 0x00000000ba62a907
> pm80xx0:: mpi_sata_completion 2292: task null, freeing CCB tag 2
> sas: sas_scsi_find_task: task 0x00000000ba62a907 is aborted
> sas: sas_eh_handle_sas_errors: task 0x00000000ba62a907 is aborted
> ata21.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x0
> ata21.00: failed command: WRITE FPDMA QUEUED
> ata21.00: cmd 61/02:00:ff:ff:ea/00:00:02:00:00/40 tag 29 ncq dma 8192 out
> res 43/04:02:ff:ff:ea/00:00:02:00:00/00 Emask 0x400 (NCQ error) <F>
> ata21.00: status: { DRDY SENSE ERR }
> ata21.00: error: { ABRT }
> ata21.00: configured for UDMA/133
> ata21: EH complete
> sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
> 
> Seems all good to me.

Forgot to mention: tested with pm80xx driver.

> 
>>
>> Finally with these changes we can make the libsas task alloc/free APIs
>> private, which they should always have been.
>>
>> Based on v5.19-rc6
>>
>> [0] https://lore.kernel.org/linux-scsi/8fb3b093-55f0-1fab-81f4-e8519810a978@xxxxxxxxxx/
>>
>> John Garry (5):
>>   scsi: pm8001: Modify task abort handling for SATA task
>>   scsi: libsas: Add sas_ata_link_abort()
>>   scsi: pm8001: Use sas_ata_link_abort() to handle NCQ errors
>>   scsi: hisi_sas: Don't issue ATA softreset in hisi_sas_abort_task()
>>   scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private
>>
>> Xingui Yang (1):
>>   scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw
>>
>>  drivers/scsi/hisi_sas/hisi_sas_main.c  |   5 +-
>>  drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  22 ++-
>>  drivers/scsi/libsas/sas_ata.c          |  10 ++
>>  drivers/scsi/libsas/sas_init.c         |   3 -
>>  drivers/scsi/libsas/sas_internal.h     |   4 +
>>  drivers/scsi/pm8001/pm8001_hwi.c       | 194 +++++++------------------
>>  drivers/scsi/pm8001/pm8001_sas.c       |  13 ++
>>  drivers/scsi/pm8001/pm8001_sas.h       |   8 +-
>>  drivers/scsi/pm8001/pm80xx_hwi.c       | 177 ++--------------------
>>  include/scsi/libsas.h                  |   4 -
>>  include/scsi/sas_ata.h                 |   5 +
>>  11 files changed, 132 insertions(+), 313 deletions(-)
>>
> 
> 


-- 
Damien Le Moal
Western Digital Research