Re: [PATCH v10 13/13] dm: add power-of-2 target for zoned devices with non power-of-2 zone sizes

[Joel Granados]

On Thu, Aug 11, 2022 at 04:30:43PM +0200, Pankaj Raghav wrote:
> Only zoned devices with power-of-2(po2) number of sectors per zone(zone
> size) were supported in linux but now non power-of-2(npo2) zone sizes
> support has been added to the block layer.

LGTM. I believe the commit message to be more clear like this. I also
looked at the other changes and it seems that they have addressed the
previous comments

Reviewed-by: Joel Granados <j.granados@xxxxxxxxxxx>
> 
> Filesystems such as F2FS and btrfs have support for zoned devices with
> po2 zone size assumption. Before adding native support for npo2 zone
> sizes, it was suggested to create a dm target for npo2 zone size device to
> appear as a po2 size zoned target so that file systems can initially work
> without any explicit changes by using this target.
> 
> The design of this target is very simple: remap the device zone size to
> the zone capacity and change the zone size to be the nearest power of 2
> number of sectors.
> 
> For e.g., a device with a zone size/capacity of 3M will have an equivalent
> target layout as follows:
> 
> Device layout :-
> zone capacity = 3M
> zone size = 3M
> 
> |--------------|-------------|
> 0             3M            6M
> 
> Target layout :-
> zone capacity=3M
> zone size = 4M
> 
> |--------------|---|--------------|---|
> 0             3M  4M             7M  8M
> 
> The area between target's zone capacity and zone size will be emulated
> in the target.
> The read IOs that fall in the emulated gap area will return 0 filled
> bio and all the other IOs in that area will result in an error.
> If a read IO span across the emulated area boundary, then the IOs are
> split across them. All other IO operations that span across the emulated
> area boundary will result in an error.
> 
> The target can be easily created as follows:
> dmsetup create <label> --table '0 <size_sects> po2zone /dev/nvme<id>'
> 
> Note that the target does not support partial mapping of the underlying
> device.
> 
> Signed-off-by: Pankaj Raghav <p.raghav@xxxxxxxxxxx>
> Suggested-by: Johannes Thumshirn <johannes.thumshirn@xxxxxxx>
> Suggested-by: Damien Le Moal <damien.lemoal@xxxxxxx>
> Suggested-by: Hannes Reinecke <hare@xxxxxxx>
> Reviewed-by: Joel Granados <j.granados@xxxxxxxxxxx>
> ---
>  .../admin-guide/device-mapper/dm-po2zone.rst  |  71 +++++
>  .../admin-guide/device-mapper/index.rst       |   1 +
>  drivers/md/Kconfig                            |  10 +
>  drivers/md/Makefile                           |   2 +
>  drivers/md/dm-po2zone-target.c                | 245 ++++++++++++++++++
>  5 files changed, 329 insertions(+)
>  create mode 100644 Documentation/admin-guide/device-mapper/dm-po2zone.rst
>  create mode 100644 drivers/md/dm-po2zone-target.c
> 
> diff --git a/Documentation/admin-guide/device-mapper/dm-po2zone.rst b/Documentation/admin-guide/device-mapper/dm-po2zone.rst
> new file mode 100644
> index 000000000000..19dc215fbcca
> --- /dev/null
> +++ b/Documentation/admin-guide/device-mapper/dm-po2zone.rst
> @@ -0,0 +1,71 @@
> +==========
> +dm-po2zone
> +==========
> +The dm-po2zone device mapper target exposes a zoned block device with a
> +non-power-of-2(npo2) number of sectors per zone as a power-of-2(po2)
> +number of sectors per zone(zone size).
> +The filesystems that support zoned block devices such as F2FS and BTRFS
> +assume po2 zone size as the kernel has traditionally only supported
> +those devices. However, as the kernel now supports zoned block devices with
> +npo2 zone sizes, the filesystems can run on top of the dm-po2zone target before
> +adding native support.
> +
> +Partial mapping of the underlying device is not supported by this target.
> +
> +Algorithm
> +=========
> +The device mapper target maps the underlying device's zone size to the
> +zone capacity and changes the zone size to the nearest po2 zone size.
> +The gap between the zone capacity and the zone size is emulated in the target.
> +E.g., a zoned block device with a zone size (and capacity) of 3M will have an
> +equivalent target layout with mapping as follows:
> +
> +::
> +
> +  0M           3M  4M        6M 8M
> +  |             |  |          |  |
> +  +x------------+--+x---------+--+x-------  Target
> +  |x            |  |x         |  |x
> +   x               x             x
> +   x               x             x
> +   x              x             x
> +   x             x             x
> +  |x            |x            |x
> +  +x------------+x------------+x----------  Device
> +  |             |             |
> +  0M           3M            6M
> +
> +A simple remap is performed for all the BIOs that do not cross the
> +emulation gap area, i.e., the area between the zone capacity and size.
> +
> +If a BIO crosses the emulation gap area, the following operations are performed:
> +
> +	Read:
> +		- If the BIO lies entirely in the emulation gap area, then zero out the BIO and complete it.
> +		- If the BIO spans the emulation gap area, split the BIO across the zone capacity boundary
> +                  and remap only the BIO within the zone capacity boundary. The other part of the split BIO
> +                  will be zeroed out.
> +
> +	Other operations:
> +                - Return an error
> +
> +Table parameters
> +================
> +
> +::
> +
> +  <dev path>
> +
> +Mandatory parameters:
> +
> +    <dev path>:
> +        Full pathname to the underlying block-device, or a
> +        "major:minor" device-number.
> +
> +Examples
> +========
> +
> +::
> +
> +  #!/bin/sh
> +  echo "0 `blockdev --getsz $1` po2zone $1" | dmsetup create po2z
> diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
> index cde52cc09645..1fd04b5b0565 100644
> --- a/Documentation/admin-guide/device-mapper/index.rst
> +++ b/Documentation/admin-guide/device-mapper/index.rst
> @@ -23,6 +23,7 @@ Device Mapper
>      dm-service-time
>      dm-uevent
>      dm-zoned
> +    dm-po2zone
>      era
>      kcopyd
>      linear
> diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
> index 998a5cfdbc4e..638801b2449a 100644
> --- a/drivers/md/Kconfig
> +++ b/drivers/md/Kconfig
> @@ -518,6 +518,16 @@ config DM_FLAKEY
>  	help
>  	 A target that intermittently fails I/O for debugging purposes.
>  
> +config DM_PO2ZONE
> +	tristate "Zoned block devices target emulating a power-of-2 number of sectors per zone"
> +	depends on BLK_DEV_DM
> +	depends on BLK_DEV_ZONED
> +	help
> +	  A target that converts a zoned block device with non-power-of-2(npo2)
> +	  number of sectors per zone to be power-of-2(po2). Use this target for
> +	  zoned block devices with npo2 number of sectors per zone until native
> +	  support is added to the filesystems and applications.
> +
>  config DM_VERITY
>  	tristate "Verity target support"
>  	depends on BLK_DEV_DM
> diff --git a/drivers/md/Makefile b/drivers/md/Makefile
> index 84291e38dca8..c23f81cc8789 100644
> --- a/drivers/md/Makefile
> +++ b/drivers/md/Makefile
> @@ -26,6 +26,7 @@ dm-era-y	+= dm-era-target.o
>  dm-clone-y	+= dm-clone-target.o dm-clone-metadata.o
>  dm-verity-y	+= dm-verity-target.o
>  dm-zoned-y	+= dm-zoned-target.o dm-zoned-metadata.o dm-zoned-reclaim.o
> +dm-po2zone-y	+= dm-po2zone-target.o
>  
>  md-mod-y	+= md.o md-bitmap.o
>  raid456-y	+= raid5.o raid5-cache.o raid5-ppl.o
> @@ -60,6 +61,7 @@ obj-$(CONFIG_DM_CRYPT)		+= dm-crypt.o
>  obj-$(CONFIG_DM_DELAY)		+= dm-delay.o
>  obj-$(CONFIG_DM_DUST)		+= dm-dust.o
>  obj-$(CONFIG_DM_FLAKEY)		+= dm-flakey.o
> +obj-$(CONFIG_DM_PO2ZONE)	+= dm-po2zone.o
>  obj-$(CONFIG_DM_MULTIPATH)	+= dm-multipath.o dm-round-robin.o
>  obj-$(CONFIG_DM_MULTIPATH_QL)	+= dm-queue-length.o
>  obj-$(CONFIG_DM_MULTIPATH_ST)	+= dm-service-time.o
> diff --git a/drivers/md/dm-po2zone-target.c b/drivers/md/dm-po2zone-target.c
> new file mode 100644
> index 000000000000..d7610463245d
> --- /dev/null
> +++ b/drivers/md/dm-po2zone-target.c
> @@ -0,0 +1,245 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Samsung Electronics Co., Ltd.
> + */
> +
> +#include <linux/device-mapper.h>
> +
> +#define DM_MSG_PREFIX "po2zone"
> +
> +struct dm_po2z_target {
> +	struct dm_dev *dev;
> +	sector_t zone_size; /* Actual zone size of the underlying dev*/
> +	sector_t zone_size_po2; /* zone_size rounded to the nearest po2 value */
> +	unsigned int zone_size_po2_shift;
> +	sector_t zone_size_diff; /* diff between zone_size_po2 and zone_size */
> +	unsigned int nr_zones;
> +};
> +
> +static inline unsigned int npo2_zone_no(struct dm_po2z_target *dmh,
> +					sector_t sect)
> +{
> +	return div64_u64(sect, dmh->zone_size);
> +}
> +
> +static inline unsigned int po2_zone_no(struct dm_po2z_target *dmh,
> +				       sector_t sect)
> +{
> +	return sect >> dmh->zone_size_po2_shift;
> +}
> +
> +static inline sector_t target_to_device_sect(struct dm_po2z_target *dmh,
> +					     sector_t sect)
> +{
> +	return sect - (po2_zone_no(dmh, sect) * dmh->zone_size_diff);
> +}
> +
> +static inline sector_t device_to_target_sect(struct dm_po2z_target *dmh,
> +					     sector_t sect)
> +{
> +	return sect + (npo2_zone_no(dmh, sect) * dmh->zone_size_diff);
> +}
> +
> +/*
> + * This target works on the complete zoned device. Partial mapping is not
> + * supported.
> + * Construct a zoned po2 logical device: <dev-path>
> + */
> +static int dm_po2z_ctr(struct dm_target *ti, unsigned int argc, char **argv)
> +{
> +	struct dm_po2z_target *dmh = NULL;
> +	int ret;
> +	sector_t zone_size;
> +	sector_t dev_capacity;
> +
> +	if (argc != 1)
> +		return -EINVAL;
> +
> +	dmh = kmalloc(sizeof(*dmh), GFP_KERNEL);
> +	if (!dmh)
> +		return -ENOMEM;
> +
> +	ret = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table),
> +			    &dmh->dev);
> +	if (ret) {
> +		ti->error = "Device lookup failed";
> +		kfree(dmh);
> +		return ret;
> +	}
> +
> +	if (!bdev_is_zoned(dmh->dev->bdev)) {
> +		DMERR("%pg is not a zoned device", dmh->dev->bdev);
> +		kfree(dmh);
> +		return -EINVAL;
> +	}
> +
> +	zone_size = bdev_zone_sectors(dmh->dev->bdev);
> +	dev_capacity = get_capacity(dmh->dev->bdev->bd_disk);
> +	if (ti->len != dev_capacity || ti->begin) {
> +		DMERR("%pg Partial mapping of the target not supported",
> +		      dmh->dev->bdev);
> +		kfree(dmh);
> +		return -EINVAL;
> +	}
> +
> +	if (is_power_of_2(zone_size))
> +		DMWARN("%pg: underlying device has a power-of-2 number of sectors per zone",
> +		       dmh->dev->bdev);
> +
> +	dmh->zone_size = zone_size;
> +	dmh->zone_size_po2 = 1 << get_count_order_long(zone_size);
> +	dmh->zone_size_po2_shift = ilog2(dmh->zone_size_po2);
> +	dmh->zone_size_diff = dmh->zone_size_po2 - dmh->zone_size;
> +	ti->private = dmh;
> +	ti->max_io_len = dmh->zone_size_po2;
> +	dmh->nr_zones = npo2_zone_no(dmh, ti->len);
> +	ti->len = dmh->zone_size_po2 * dmh->nr_zones;
> +
> +	return 0;
> +}
> +
> +static int dm_po2z_report_zones_cb(struct blk_zone *zone, unsigned int idx,
> +				   void *data)
> +{
> +	struct dm_report_zones_args *args = data;
> +	struct dm_po2z_target *dmh = args->tgt->private;
> +
> +	zone->start = device_to_target_sect(dmh, zone->start);
> +	zone->wp = device_to_target_sect(dmh, zone->wp);
> +	zone->len = dmh->zone_size_po2;
> +	args->next_sector = zone->start + zone->len;
> +
> +	return args->orig_cb(zone, args->zone_idx++, args->orig_data);
> +}
> +
> +static int dm_po2z_report_zones(struct dm_target *ti,
> +				struct dm_report_zones_args *args,
> +				unsigned int nr_zones)
> +{
> +	struct dm_po2z_target *dmh = ti->private;
> +	sector_t sect = po2_zone_no(dmh, args->next_sector) * dmh->zone_size;
> +
> +	return blkdev_report_zones(dmh->dev->bdev, sect, nr_zones,
> +				   dm_po2z_report_zones_cb, args);
> +}
> +
> +static int dm_po2z_end_io(struct dm_target *ti, struct bio *bio,
> +			  blk_status_t *error)
> +{
> +	struct dm_po2z_target *dmh = ti->private;
> +
> +	if (bio->bi_status == BLK_STS_OK && bio_op(bio) == REQ_OP_ZONE_APPEND)
> +		bio->bi_iter.bi_sector =
> +			device_to_target_sect(dmh, bio->bi_iter.bi_sector);
> +
> +	return DM_ENDIO_DONE;
> +}
> +
> +static void dm_po2z_io_hints(struct dm_target *ti, struct queue_limits *limits)
> +{
> +	struct dm_po2z_target *dmh = ti->private;
> +
> +	limits->chunk_sectors = dmh->zone_size_po2;
> +}
> +
> +static bool bio_across_emulated_zone_area(struct dm_po2z_target *dmh,
> +					  struct bio *bio)
> +{
> +	unsigned int zone_idx = po2_zone_no(dmh, bio->bi_iter.bi_sector);
> +	sector_t nr_sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
> +
> +	return (bio->bi_iter.bi_sector + nr_sectors) >
> +	       (zone_idx << dmh->zone_size_po2_shift) + dmh->zone_size;
> +}
> +
> +static int dm_po2z_map_read_emulated_area(struct dm_po2z_target *dmh,
> +					  struct bio *bio)
> +{
> +	sector_t start_sect = bio->bi_iter.bi_sector;
> +	unsigned int zone_idx = po2_zone_no(dmh, start_sect);
> +	sector_t relative_sect_in_zone = start_sect - (zone_idx << dmh->zone_size_po2_shift);
> +	sector_t split_io_pos;
> +
> +	/*
> +	 * If the starting sector is in the emulated area then fill
> +	 * all the bio with zeros. If bio is across emulated zone boundary,
> +	 * split the bio across boundaries and fill zeros only for the
> +	 * bio that is between the zone capacity and the zone size.
> +	 */
> +	if (relative_sect_in_zone < dmh->zone_size) {
> +		split_io_pos = (zone_idx * dmh->zone_size_po2) + dmh->zone_size;
> +		dm_accept_partial_bio(bio, split_io_pos - start_sect);
> +		bio->bi_iter.bi_sector = target_to_device_sect(dmh, start_sect);
> +
> +		return DM_MAPIO_REMAPPED;
> +	}
> +
> +	zero_fill_bio(bio);
> +	bio_endio(bio);
> +	return DM_MAPIO_SUBMITTED;
> +}
> +
> +static int dm_po2z_map(struct dm_target *ti, struct bio *bio)
> +{
> +	struct dm_po2z_target *dmh = ti->private;
> +
> +	bio_set_dev(bio, dmh->dev->bdev);
> +	if (bio_sectors(bio) || op_is_zone_mgmt(bio_op(bio))) {
> +		if (!bio_across_emulated_zone_area(dmh, bio)) {
> +			bio->bi_iter.bi_sector = target_to_device_sect(dmh,
> +								       bio->bi_iter.bi_sector);
> +			return DM_MAPIO_REMAPPED;
> +		}
> +		/*
> +		 * Read operation on the emulated zone area (between zone capacity
> +		 * and zone size) will fill the bio with zeroes. Any other operation
> +		 * in the emulated area should return an error.
> +		 */
> +		if (bio_op(bio) == REQ_OP_READ)
> +			return dm_po2z_map_read_emulated_area(dmh, bio);
> +
> +		return DM_MAPIO_KILL;
> +	}
> +	return DM_MAPIO_REMAPPED;
> +}
> +
> +static int dm_po2z_iterate_devices(struct dm_target *ti,
> +				   iterate_devices_callout_fn fn, void *data)
> +{
> +	struct dm_po2z_target *dmh = ti->private;
> +	sector_t len = dmh->nr_zones * dmh->zone_size;
> +
> +	return fn(ti, dmh->dev, 0, len, data);
> +}
> +
> +static struct target_type dm_po2z_target = {
> +	.name = "po2zone",
> +	.version = { 1, 0, 0 },
> +	.features = DM_TARGET_ZONED_HM | DM_TARGET_EMULATED_ZONES,
> +	.map = dm_po2z_map,
> +	.end_io = dm_po2z_end_io,
> +	.report_zones = dm_po2z_report_zones,
> +	.iterate_devices = dm_po2z_iterate_devices,
> +	.module = THIS_MODULE,
> +	.io_hints = dm_po2z_io_hints,
> +	.ctr = dm_po2z_ctr,
> +};
> +
> +static int __init dm_po2z_init(void)
> +{
> +	return dm_register_target(&dm_po2z_target);
> +}
> +
> +static void __exit dm_po2z_exit(void)
> +{
> +	dm_unregister_target(&dm_po2z_target);
> +}
> +
> +/* Module hooks */
> +module_init(dm_po2z_init);
> +module_exit(dm_po2z_exit);
> +
> +MODULE_DESCRIPTION(DM_NAME "power-of-2 zoned target");
> +MODULE_AUTHOR("Pankaj Raghav <p.raghav@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> +
> -- 
> 2.25.1
>

Attachment: signature.asc
Description: PGP signature