Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property
From: Andrew Lunn
Date: Fri Aug 12 2022 - 11:36:45 EST
On Sat, Aug 13, 2022 at 12:50:08AM +1000, wei.fang@xxxxxxx wrote:
> From: Wei Fang <wei.fang@xxxxxxx>
>
> The hibernation mode of Atheros AR803x PHYs is default enabled.
> When the cable is unplugged, the PHY will enter hibernation
> mode and the PHY clock does down. For some MACs, it needs the
> clock to support it's logic. For instance, stmmac needs the PHY
> inputs clock is present for software reset completion. Therefore,
> It is reasonable to add a DT property to disable hibernation mode.
>
> Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> ---
> Documentation/devicetree/bindings/net/qca,ar803x.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> index b3d4013b7ca6..d08431d79b83 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> @@ -40,6 +40,12 @@ properties:
> Only supported on the AR8031.
> type: boolean
>
> + qca,disable-hibernation:
> + description: |
> + If set, the PHY will not enter hibernation mode when the cable is
> + unplugged.
> + type: boolean
The description itself needs indenting 2 space.
I would suggest you do what the bot suggests and install the dtschema
tools.
Andrew