Re: [PATCH] gpio: Allow user to customise maximum number of GPIOs

[H. Peter Anvin]

On August 12, 2022 2:58:36 PM PDT, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
>On Thu, Aug 11, 2022 at 11:12 PM H. Peter Anvin <hpa@xxxxxxxxx> wrote:
>>
>> On August 9, 2022 3:40:38 AM PDT, Christophe Leroy <christophe.leroy@xxxxxxxxxx> wrote:
>> >At the time being, the default maximum number of GPIOs is set to 512
>> >and can only get customised via an architecture specific
>> >CONFIG_ARCH_NR_GPIO.
>> >
>> >The maximum number of GPIOs might be dependent on the number of
>> >interface boards and is somewhat independent of architecture.
>> >
>> >Allow the user to select that maximum number outside of any
>> >architecture configuration. To enable that, re-define a
>> >core CONFIG_ARCH_NR_GPIO for architectures which don't already
>> >define one. Guard it with a new hidden CONFIG_ARCH_HAS_NR_GPIO.
>> >
>> >Only two architectures will need CONFIG_ARCH_HAS_NR_GPIO: x86 and arm.
>> >
>> >On arm, do like x86 and set 512 as the default instead of 0, that
>> >allows simplifying the logic in asm-generic/gpio.h
>
>...
>
>> This seems very odd to me. GPIOs can be, and often are, attached to peripheral buses which means that the *same system* can have anything from none to thousands of gpios ..
>
>Basically this setting should give us a *minimum* GPIO lines that are
>present on the system. And that is perfectly SoC dependent. The real
>issue is that the GPIO framework has these global arrays that (still?)
>can't be initialized from the heap due to too early initialization (is
>it the true reason?).
>

Ok that makes more sense... but in that case, it would also be good to reclaim excess storage that turns out to not be needed.

I am a bit skeptical, though – we get basic memory allocation very early.