[PATCH v2 1/7] dt-bindings: net: dsa: mediatek,mt7530: make trivial changes
From: Arınç ÜNAL
Date: Sat Aug 13 2022 - 11:45:33 EST
Make trivial changes on the binding.
- Update title to include MT7531 switch.
- Add me as a maintainer. List maintainers in alphabetical order by first
name.
- Add description to compatible strings.
- Stretch descriptions up to the 80 character limit.
- Remove quotes from $ref: "dsa.yaml#".
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
.../bindings/net/dsa/mediatek,mt7530.yaml | 36 ++++++++++++-------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 17ab6c69ecc7..edf48e917173 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -4,12 +4,13 @@
$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Mediatek MT7530 Ethernet switch
+title: Mediatek MT7530 and MT7531 Ethernet Switches
maintainers:
- - Sean Wang <sean.wang@xxxxxxxxxxxx>
+ - Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
- Landen Chao <Landen.Chao@xxxxxxxxxxxx>
- DENG Qingfang <dqfext@xxxxxxxxx>
+ - Sean Wang <sean.wang@xxxxxxxxxxxx>
description: |
Port 5 of mt7530 and mt7621 switch is muxed between:
@@ -61,10 +62,21 @@ description: |
properties:
compatible:
- enum:
- - mediatek,mt7530
- - mediatek,mt7531
- - mediatek,mt7621
+ oneOf:
+ - description:
+ Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC
+ items:
+ - const: mediatek,mt7530
+
+ - description:
+ Standalone MT7531
+ items:
+ - const: mediatek,mt7531
+
+ - description:
+ Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+ items:
+ - const: mediatek,mt7621
reg:
maxItems: 1
@@ -79,7 +91,7 @@ properties:
gpio-controller:
type: boolean
description:
- if defined, MT7530's LED controller will run on GPIO mode.
+ If defined, MT7530's LED controller will run on GPIO mode.
"#interrupt-cells":
const: 1
@@ -92,8 +104,8 @@ properties:
io-supply:
description:
Phandle to the regulator node necessary for the I/O power.
- See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
- for details for the regulator setup on these boards.
+ See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
+ details for the regulator setup on these boards.
mediatek,mcm:
type: boolean
@@ -110,8 +122,8 @@ properties:
resets:
description:
- Phandle pointing to the system reset controller with line index for
- the ethsys.
+ Phandle pointing to the system reset controller with line index for the
+ ethsys.
maxItems: 1
patternProperties:
@@ -148,7 +160,7 @@ required:
- reg
allOf:
- - $ref: "dsa.yaml#"
+ - $ref: dsa.yaml#
- if:
required:
- mediatek,mcm
--
2.34.1