Re: [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver

[Jonathan Cameron]

On Sat, 13 Aug 2022 01:34:40 +0300
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:

> On Fri, Aug 12, 2022 at 7:52 PM Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx> wrote:
> >
> > MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
> > sensitivity consumer applications. It has dynamic user-selectable full
> > scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
> > with output data rates from 1Hz to 1000Hz.  
> 
> > Spec: https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf  
> 
> Can you use Datasheet: tag below (just before your SoB tag)?
> 
> > This driver supports following MSA311 features:
> >     - IIO interface
> >     - Different power modes: NORMAL and SUSPEND (using pm_runtime)
> >     - ODR (Output Data Rate) selection
> >     - Scale and samp_freq selection
> >     - IIO triggered buffer, IIO reg access
> >     - NEW_DATA interrupt + trigger
> >
> > Below features to be done:
> >     - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL
> >     - Low Power mode  
> 
> ...
> 
> > +static const struct {
> > +       int val;
> > +       int val2;
> > +} msa311_fs_table[] = {
> > +       {0, 9580}, {0, 19160}, {0, 38320}, {0, 76641}
> > +};  
> 
> At least you may deduplicate the type definition for these data structures, like
> 
> struct iio_float {

iio_int_plus_micro maybe...
we have lots of fixed point types and they definitely are floats
then integer, micro


>   int integer;
>   int fract;
> };
>