[PATCH V2] clk: imx8mp: tune the order of enet_qos_root_clk

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@xxxxxxx>

The enet_qos_root_clk takes sim_enet_root_clk as parent. When
registering enet_qos_root_clk, it will be put into clk orphan list,
because sim_enet_root_clk is not ready.

When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
set enet_qos_root_clk parent to sim_enet_root_clk.

Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
enabled and disabled during the enet_qos_root_clk reparent phase.

All the above are correct. But with M7 booted early and using
enet, M7 enet feature will be broken, because clk driver probe phase
disable the needed clks, in case M7 firmware not configure
sim_enet_root_clk.

And tune the order would also save cpu cycles.

Reviewed-by: Ye Li <ye.li@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---

V2:
 Use Abel's new address

V1:
 Patch got reviewed in NXP internal.

 drivers/clk/imx/clk-imx8mp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index e89db568f5a8..652ae58c2735 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -665,8 +665,8 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_CAN1_ROOT] = imx_clk_hw_gate2("can1_root_clk", "can1", ccm_base + 0x4350, 0);
 	hws[IMX8MP_CLK_CAN2_ROOT] = imx_clk_hw_gate2("can2_root_clk", "can2", ccm_base + 0x4360, 0);
 	hws[IMX8MP_CLK_SDMA1_ROOT] = imx_clk_hw_gate4("sdma1_root_clk", "ipg_root", ccm_base + 0x43a0, 0);
-	hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
 	hws[IMX8MP_CLK_SIM_ENET_ROOT] = imx_clk_hw_gate4("sim_enet_root_clk", "enet_axi", ccm_base + 0x4400, 0);
+	hws[IMX8MP_CLK_ENET_QOS_ROOT] = imx_clk_hw_gate4("enet_qos_root_clk", "sim_enet_root_clk", ccm_base + 0x43b0, 0);
 	hws[IMX8MP_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", ccm_base + 0x4450, 0);
 	hws[IMX8MP_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", ccm_base + 0x4460, 0);
 	hws[IMX8MP_CLK_UART1_ROOT] = imx_clk_hw_gate4("uart1_root_clk", "uart1", ccm_base + 0x4490, 0);
-- 
2.37.1