RE: [PATCH V2] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete

[Sherry Sun]

Gentle ping...

Best regards
Sherry

> -----Original Message-----
> From: Sherry Sun
> Sent: 2022年8月4日 15:06
> To: gregkh@xxxxxxxxxxxxxxxxxxx; jirislaby@xxxxxxxxxx
> Cc: linux-serial@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; dl-linux-imx
> <linux-imx@xxxxxxx>
> Subject: [PATCH V2] tty: serial: lpuart: disable flow control while waiting for
> the transmit engine to complete
> 
> When the user initializes the uart port, and waits for the transmit engine to
> complete in lpuart32_set_termios(), if the UART TX fifo has dirty data and the
> UARTMODIR enable the flow control, the TX fifo may never be empty. So
> here we should disable the flow control first to make sure the transmit engin
> can complete.
> 
> Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
> ---
> Changes in V2:
> 1. Rephrase the commit log as suggested by Jiri.
> ---
>  drivers/tty/serial/fsl_lpuart.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
> index fc7d235a1e27..f0fccd2ff7ac 100644
> --- a/drivers/tty/serial/fsl_lpuart.c
> +++ b/drivers/tty/serial/fsl_lpuart.c
> @@ -2172,6 +2172,7 @@ lpuart32_set_termios(struct uart_port *port,
> struct ktermios *termios,
>  	uart_update_timeout(port, termios->c_cflag, baud);
> 
>  	/* wait transmit engin complete */
> +	lpuart32_write(&sport->port, 0, UARTMODIR);
>  	lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
> 
>  	/* disable transmit and receive */
> --
> 2.17.1