Re: [PATCH] drivers/perf: Change WARN_ON() to dev_err() on irq_set_affinity() failure
From: Mark Rutland
Date: Mon Aug 15 2022 - 07:25:22 EST
On Mon, Aug 15, 2022 at 05:28:15PM +0800, Yicong Yang wrote:
> From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
>
> The WARN_ON() on irq_set_affinity() failure is misused according to the [1]
> and may crash people's box unintentionally. This may also be redundant since
> in the failure case we may also trigger the WARN and dump the stack in the
> perf core[2] for a second time.
In what way do you think are these misused? I can't immediately see what you
think applies from [1].
In perf we rely upon interrupt affinity to enforce serialization in a few
places, so if we fail to set the interrupt affinity there are a number of
things which could go wrong (e.g. memory corruption, and all the fun that could
result from that). We use WARN_ON() to catch that early.
I can't immediately see how [2] is relevant, since that's in the context of an
IPI handler, and this patch affects the affinity of the PMU HW IRQ handler.
Thanks,
Mark.
>
> So change the WARN_ON() to dev_err() to just print the failure message.
>
> [1] https://github.com/torvalds/linux/blob/master/include/asm-generic/bug.h#L74
> [2] https://github.com/torvalds/linux/blob/master/kernel/events/core.c#L313
>
> Suggested-by: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
> [https://lore.kernel.org/lkml/YuOi3i0XHV++z1YI@xxxxxxxxx/]
> Signed-off-by: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
> ---
> drivers/perf/arm-ccn.c | 5 +++--
> drivers/perf/arm_dmc620_pmu.c | 3 ++-
> drivers/perf/arm_smmuv3_pmu.c | 6 ++++--
> drivers/perf/fsl_imx8_ddr_perf.c | 3 ++-
> drivers/perf/hisilicon/hisi_pcie_pmu.c | 6 ++++--
> drivers/perf/hisilicon/hisi_uncore_pmu.c | 6 ++++--
> drivers/perf/qcom_l2_pmu.c | 8 ++++++--
> drivers/perf/xgene_pmu.c | 6 ++++--
> 8 files changed, 29 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/perf/arm-ccn.c b/drivers/perf/arm-ccn.c
> index 728d13d8e98a..83abd909ba49 100644
> --- a/drivers/perf/arm-ccn.c
> +++ b/drivers/perf/arm-ccn.c
> @@ -1210,8 +1210,9 @@ static int arm_ccn_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> return 0;
> perf_pmu_migrate_context(&dt->pmu, cpu, target);
> dt->cpu = target;
> - if (ccn->irq)
> - WARN_ON(irq_set_affinity(ccn->irq, cpumask_of(dt->cpu)));
> + if (ccn->irq && irq_set_affinity(ccn->irq, cpumask_of(dt->cpu)))
> + dev_err(ccn->dev, "Failed to set interrupt affinity\n");
> +
> return 0;
> }
>
> diff --git a/drivers/perf/arm_dmc620_pmu.c b/drivers/perf/arm_dmc620_pmu.c
> index 280a6ae3e27c..b59d3d9eb779 100644
> --- a/drivers/perf/arm_dmc620_pmu.c
> +++ b/drivers/perf/arm_dmc620_pmu.c
> @@ -621,7 +621,8 @@ static int dmc620_pmu_cpu_teardown(unsigned int cpu,
> perf_pmu_migrate_context(&dmc620_pmu->pmu, irq->cpu, target);
> mutex_unlock(&dmc620_pmu_irqs_lock);
>
> - WARN_ON(irq_set_affinity(irq->irq_num, cpumask_of(target)));
> + if (irq_set_affinity(irq->irq_num, cpumask_of(target)))
> + dev_err(dmc620_pmu->pmu.dev, "Failed to set interrupt affinity\n");
> irq->cpu = target;
>
> return 0;
> diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
> index 00d4c45a8017..05e1b3e274d7 100644
> --- a/drivers/perf/arm_smmuv3_pmu.c
> +++ b/drivers/perf/arm_smmuv3_pmu.c
> @@ -646,7 +646,8 @@ static int smmu_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
>
> perf_pmu_migrate_context(&smmu_pmu->pmu, cpu, target);
> smmu_pmu->on_cpu = target;
> - WARN_ON(irq_set_affinity(smmu_pmu->irq, cpumask_of(target)));
> + if (irq_set_affinity(smmu_pmu->irq, cpumask_of(target)))
> + dev_err(smmu_pmu->dev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> @@ -892,7 +893,8 @@ static int smmu_pmu_probe(struct platform_device *pdev)
>
> /* Pick one CPU to be the preferred one to use */
> smmu_pmu->on_cpu = raw_smp_processor_id();
> - WARN_ON(irq_set_affinity(smmu_pmu->irq, cpumask_of(smmu_pmu->on_cpu)));
> + if (irq_set_affinity(smmu_pmu->irq, cpumask_of(smmu_pmu->on_cpu)))
> + dev_err(dev, "Failed to set interrupt affinity\n");
>
> err = cpuhp_state_add_instance_nocalls(cpuhp_state_num,
> &smmu_pmu->node);
> diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c
> index 8e058e08fe81..c44192e2d9db 100644
> --- a/drivers/perf/fsl_imx8_ddr_perf.c
> +++ b/drivers/perf/fsl_imx8_ddr_perf.c
> @@ -671,7 +671,8 @@ static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
> perf_pmu_migrate_context(&pmu->pmu, cpu, target);
> pmu->cpu = target;
>
> - WARN_ON(irq_set_affinity(pmu->irq, cpumask_of(pmu->cpu)));
> + if (irq_set_affinity(pmu->irq, cpumask_of(pmu->cpu)))
> + dev_err(pmu->dev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> diff --git a/drivers/perf/hisilicon/hisi_pcie_pmu.c b/drivers/perf/hisilicon/hisi_pcie_pmu.c
> index 21771708597d..90aed9e51396 100644
> --- a/drivers/perf/hisilicon/hisi_pcie_pmu.c
> +++ b/drivers/perf/hisilicon/hisi_pcie_pmu.c
> @@ -655,7 +655,8 @@ static int hisi_pcie_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
>
> if (pcie_pmu->on_cpu == -1) {
> pcie_pmu->on_cpu = cpu;
> - WARN_ON(irq_set_affinity(pcie_pmu->irq, cpumask_of(cpu)));
> + if (irq_set_affinity(pcie_pmu->irq, cpumask_of(cpu)))
> + pci_err(pcie_pmu->pdev, "Failed to set interrupt affinity\n");
> }
>
> return 0;
> @@ -681,7 +682,8 @@ static int hisi_pcie_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> perf_pmu_migrate_context(&pcie_pmu->pmu, cpu, target);
> /* Use this CPU for event counting */
> pcie_pmu->on_cpu = target;
> - WARN_ON(irq_set_affinity(pcie_pmu->irq, cpumask_of(target)));
> + if (irq_set_affinity(pcie_pmu->irq, cpumask_of(target)))
> + pci_err(pcie_pmu->pdev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> diff --git a/drivers/perf/hisilicon/hisi_uncore_pmu.c b/drivers/perf/hisilicon/hisi_uncore_pmu.c
> index fbc8a93d5eac..74397b5ec889 100644
> --- a/drivers/perf/hisilicon/hisi_uncore_pmu.c
> +++ b/drivers/perf/hisilicon/hisi_uncore_pmu.c
> @@ -492,7 +492,8 @@ int hisi_uncore_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> hisi_pmu->on_cpu = cpu;
>
> /* Overflow interrupt also should use the same CPU */
> - WARN_ON(irq_set_affinity(hisi_pmu->irq, cpumask_of(cpu)));
> + if (irq_set_affinity(hisi_pmu->irq, cpumask_of(cpu)))
> + dev_err(hisi_pmu->dev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> @@ -525,7 +526,8 @@ int hisi_uncore_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> perf_pmu_migrate_context(&hisi_pmu->pmu, cpu, target);
> /* Use this CPU for event counting */
> hisi_pmu->on_cpu = target;
> - WARN_ON(irq_set_affinity(hisi_pmu->irq, cpumask_of(target)));
> + if (irq_set_affinity(hisi_pmu->irq, cpumask_of(target)))
> + dev_err(hisi_pmu->dev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c
> index 30234c261b05..c6fe01c7e637 100644
> --- a/drivers/perf/qcom_l2_pmu.c
> +++ b/drivers/perf/qcom_l2_pmu.c
> @@ -793,7 +793,9 @@ static int l2cache_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> cpumask_set_cpu(cpu, &l2cache_pmu->cpumask);
> cluster_pmu_reset();
>
> - WARN_ON(irq_set_affinity(cluster->irq, cpumask_of(cpu)));
> + if (irq_set_affinity(cluster->irq, cpumask_of(cpu)))
> + dev_err(&l2cache_pmu->pdev->dev,
> + "Failed to set interrupt affinity\n");
> enable_irq(cluster->irq);
>
> return 0;
> @@ -831,7 +833,9 @@ static int l2cache_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> perf_pmu_migrate_context(&l2cache_pmu->pmu, cpu, target);
> cluster->on_cpu = target;
> cpumask_set_cpu(target, &l2cache_pmu->cpumask);
> - WARN_ON(irq_set_affinity(cluster->irq, cpumask_of(target)));
> + if (irq_set_affinity(cluster->irq, cpumask_of(target)))
> + dev_err(&l2cache_pmu->pdev->dev,
> + "Failed to set interrupt affinity\n");
>
> return 0;
> }
> diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c
> index 0c32dffc7ede..f31e678fdb69 100644
> --- a/drivers/perf/xgene_pmu.c
> +++ b/drivers/perf/xgene_pmu.c
> @@ -1790,7 +1790,8 @@ static int xgene_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> cpumask_set_cpu(cpu, &xgene_pmu->cpu);
>
> /* Overflow interrupt also should use the same CPU */
> - WARN_ON(irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu));
> + if (irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu))
> + dev_err(xgene_pmu->dev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> @@ -1823,7 +1824,8 @@ static int xgene_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
>
> cpumask_set_cpu(target, &xgene_pmu->cpu);
> /* Overflow interrupt also should use the same CPU */
> - WARN_ON(irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu));
> + if (irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu))
> + dev_err(xgene_pmu->dev, "Failed to set interrupt affinity\n");
>
> return 0;
> }
> --
> 2.24.0
>