Re: [PATCH V2 1/1] mmc: sdhci-pci-o2micro: fix some SD cards compatibility issue at DDR50 mode

[Ulf Hansson]

On Fri, 29 Jul 2022 at 12:05, Chevron Li <chevron.li@xxxxxxxxxxxxxx> wrote:
>
> Bayhub chips have better compatibility support for SDR50 than DDR50
> and both mode have the same R/W performance when clock frequency >= 100MHz.
> Disable DDR50 mode and use SDR50 instead.
>
> Signed-off-by: Chevron Li <chevron.li@xxxxxxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe



> ---
> Changes on V1:
> 1.Set quirks2 flag SDHCI_QUIRK2_BROKEN_DDR50 for bayhub chips.
> 2.Use bayhub hardware input tuning for SDR50 mode instead of standard tuning flow.
>
> Changes on V2:
> Update commit format and information.
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 0d4d343dbb77..ad457cd9cbaa 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -317,11 +317,12 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
>         u32 reg_val;
>
>         /*
> -        * This handler only implements the eMMC tuning that is specific to
> +        * This handler implements the hardware tuning that is specific to
>          * this controller.  Fall back to the standard method for other TIMING.
>          */
>         if ((host->timing != MMC_TIMING_MMC_HS200) &&
> -               (host->timing != MMC_TIMING_UHS_SDR104))
> +               (host->timing != MMC_TIMING_UHS_SDR104) &&
> +               (host->timing != MMC_TIMING_UHS_SDR50))
>                 return sdhci_execute_tuning(mmc, opcode);
>
>         if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
> @@ -631,6 +632,8 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
>                 if (reg & 0x1)
>                         host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
>
> +               host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
> +
>                 sdhci_pci_o2_enable_msi(chip, host);
>
>                 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
>
> base-commit: 68e77ffbfd06ae3ef8f2abf1c3b971383c866983
> --
> 2.32.0
>