[PATCH 5.15 457/779] clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register
From: Greg Kroah-Hartman
Date: Mon Aug 15 2022 - 15:19:38 EST
From: Nikita Travkin <nikita@xxxxxxx>
[ Upstream commit d0696770cef35a1fd16ea2167e2198c18aa6fbfe ]
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf596e ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@xxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/clk/qcom/clk-rcg2.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index ebdbc842b98a..c3823cc32edc 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -13,6 +13,7 @@
#include <linux/rational.h>
#include <linux/regmap.h>
#include <linux/math64.h>
+#include <linux/minmax.h>
#include <linux/slab.h>
#include <asm/div64.h>
@@ -429,9 +430,11 @@ static int clk_rcg2_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
/* Calculate 2d value */
d = DIV_ROUND_CLOSEST(n * duty_per * 2, 100);
- /* Check bit widths of 2d. If D is too big reduce duty cycle. */
- if (d > mask)
- d = mask;
+ /*
+ * Check bit widths of 2d. If D is too big reduce duty cycle.
+ * Also make sure it is never zero.
+ */
+ d = clamp_val(d, 1, mask);
if ((d / 2) > (n - m))
d = (n - m) * 2;
--
2.35.1