[PATCH 5.18 0066/1095] RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context

[Greg Kroah-Hartman]

From: Xianting Tian <xianting.tian@xxxxxxxxxxxxxxxxx>

commit 357628e68f5c08ad578a718dc62a0031e06dbe91 upstream.

Use __smp_processor_id() to avoid check the preemption context when
CONFIG_DEBUG_PREEMPT enabled, as we will enter crash kernel and no
return.

Without the patch,
[  103.781044] sysrq: Trigger a crash
[  103.784625] Kernel panic - not syncing: sysrq triggered crash
[  103.837634] CPU1: off
[  103.889668] CPU2: off
[  103.933479] CPU3: off
[  103.939424] Starting crashdump kernel...
[  103.943442] BUG: using smp_processor_id() in preemptible [00000000] code: sh/346
[  103.950884] caller is debug_smp_processor_id+0x1c/0x26
[  103.956051] CPU: 0 PID: 346 Comm: sh Kdump: loaded Not tainted 5.10.113-00002-gce03f03bf4ec-dirty #149
[  103.965355] Call Trace:
[  103.967805] [<ffffffe00020372a>] walk_stackframe+0x0/0xa2
[  103.973206] [<ffffffe000bcf1f4>] show_stack+0x32/0x3e
[  103.978258] [<ffffffe000bd382a>] dump_stack_lvl+0x72/0x8e
[  103.983655] [<ffffffe000bd385a>] dump_stack+0x14/0x1c
[  103.988705] [<ffffffe000bdc8fe>] check_preemption_disabled+0x9e/0xaa
[  103.995057] [<ffffffe000bdc926>] debug_smp_processor_id+0x1c/0x26
[  104.001150] [<ffffffe000206c64>] machine_kexec+0x22/0xd0
[  104.006463] [<ffffffe000291a7e>] __crash_kexec+0x6a/0xa4
[  104.011774] [<ffffffe000bcf3fa>] panic+0xfc/0x2b0
[  104.016480] [<ffffffe000656ca4>] sysrq_reset_seq_param_set+0x0/0x70
[  104.022745] [<ffffffe000657310>] __handle_sysrq+0x8c/0x154
[  104.028229] [<ffffffe0006577e8>] write_sysrq_trigger+0x5a/0x6a
[  104.034061] [<ffffffe0003d90e0>] proc_reg_write+0x58/0xd4
[  104.039459] [<ffffffe00036cff4>] vfs_write+0x7e/0x254
[  104.044509] [<ffffffe00036d2f6>] ksys_write+0x58/0xbe
[  104.049558] [<ffffffe00036d36a>] sys_write+0xe/0x16
[  104.054434] [<ffffffe000201b9a>] ret_from_syscall+0x0/0x2
[  104.067863] Will call new kernel at ecc00000 from hart id 0
[  104.074939] FDT image at fc5ee000
[  104.079523] Bye...

With the patch we can got clear output,
[   67.740553] sysrq: Trigger a crash
[   67.744166] Kernel panic - not syncing: sysrq triggered crash
[   67.809123] CPU1: off
[   67.865210] CPU2: off
[   67.909075] CPU3: off
[   67.919123] Starting crashdump kernel...
[   67.924900] Will call new kernel at ecc00000 from hart id 0
[   67.932045] FDT image at fc5ee000
[   67.935560] Bye...

Fixes: 0e105f1d0037 ("riscv: use hart id instead of cpu id on machine_kexec")
Reviewed-by: Guo Ren <guoren@xxxxxxxxxx>
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
Reviewed-by: Atish Patra <atishp@xxxxxxxxxxxx>
Signed-off-by: Xianting Tian <xianting.tian@xxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220811074150.3020189-2-xianting.tian@xxxxxxxxxxxxxxxxx
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/riscv/kernel/machine_kexec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/riscv/kernel/machine_kexec.c
+++ b/arch/riscv/kernel/machine_kexec.c
@@ -171,7 +171,7 @@ machine_kexec(struct kimage *image)
 	struct kimage_arch *internal = &image->arch;
 	unsigned long jump_addr = (unsigned long) image->start;
 	unsigned long first_ind_entry = (unsigned long) &image->head;
-	unsigned long this_cpu_id = smp_processor_id();
+	unsigned long this_cpu_id = __smp_processor_id();
 	unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
 	unsigned long fdt_addr = internal->fdt_addr;
 	void *control_code_buffer = page_address(image->control_code_page);