[PATCH 5.18 0761/1095] phy: rockchip-inno-usb2: Ignore OTG IRQs in host mode
From: Greg Kroah-Hartman
Date: Mon Aug 15 2022 - 18:15:06 EST
From: Samuel Holland <samuel@xxxxxxxxxxxx>
[ Upstream commit fd7d47484125c7d04578de9294faa7fec6e5df0a ]
When the OTG port is fixed to host mode, the driver does not request its
IRQs, nor does it enable those IRQs in hardware. Similarly, the driver
should ignore the OTG port IRQs when handling the shared interrupt.
Otherwise, it would update the extcon based on an ID pin which may be in
an undefined state, or try to queue a uninitialized work item.
Fixes: 6a98df08ccd5 ("phy: rockchip-inno-usb2: Fix muxed interrupt support")
Reported-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
Tested-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220708061434.38115-1-samuel@xxxxxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index cba5c32cbaee..0c6548ac9d8a 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -942,7 +942,9 @@ static irqreturn_t rockchip_usb2phy_irq(int irq, void *data)
switch (rport->port_id) {
case USB2PHY_PORT_OTG:
- ret |= rockchip_usb2phy_otg_mux_irq(irq, rport);
+ if (rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN)
+ ret |= rockchip_usb2phy_otg_mux_irq(irq, rport);
break;
case USB2PHY_PORT_HOST:
ret |= rockchip_usb2phy_linestate_irq(irq, rport);
--
2.35.1