[PATCH 5.18 0918/1095] powerpc: fix typos in comments

From: Greg Kroah-Hartman
Date: Mon Aug 15 2022 - 18:53:07 EST

From: Julia Lawall <Julia.Lawall@xxxxxxxx>

[ Upstream commit 1fd02f6605b855b4af2883f29a2abc88bdf17857 ]

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@xxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@xxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/powerpc/boot/cuboot-hotfoot.c | 2 +-
arch/powerpc/crypto/aes-spe-glue.c | 2 +-
arch/powerpc/kernel/cputable.c | 2 +-
arch/powerpc/kernel/dawr.c | 2 +-
arch/powerpc/kernel/eeh.c | 4 ++--
arch/powerpc/kernel/eeh_event.c | 2 +-
arch/powerpc/kernel/fadump.c | 4 ++--
arch/powerpc/kernel/module_32.c | 2 +-
arch/powerpc/kernel/module_64.c | 4 ++--
arch/powerpc/kernel/pci-common.c | 2 +-
arch/powerpc/kernel/pci_of_scan.c | 2 +-
arch/powerpc/kernel/process.c | 4 ++--
arch/powerpc/kernel/prom_init.c | 2 +-
arch/powerpc/kernel/ptrace/ptrace-view.c | 2 +-
arch/powerpc/kernel/rtas_flash.c | 2 +-
arch/powerpc/kernel/setup-common.c | 2 +-
arch/powerpc/kernel/signal_64.c | 2 +-
arch/powerpc/kernel/smp.c | 2 +-
arch/powerpc/kernel/time.c | 4 ++--
arch/powerpc/kernel/watchdog.c | 2 +-
arch/powerpc/kexec/core_64.c | 2 +-
arch/powerpc/kvm/book3s_64_mmu_hv.c | 2 +-
arch/powerpc/kvm/book3s_64_vio_hv.c | 2 +-
arch/powerpc/kvm/book3s_emulate.c | 2 +-
arch/powerpc/kvm/book3s_hv_p9_entry.c | 2 +-
arch/powerpc/kvm/book3s_hv_uvmem.c | 2 +-
arch/powerpc/kvm/book3s_pr.c | 2 +-
arch/powerpc/kvm/book3s_xics.c | 2 +-
arch/powerpc/kvm/book3s_xive.c | 6 +++---
arch/powerpc/kvm/e500mc.c | 2 +-
arch/powerpc/mm/book3s64/hash_pgtable.c | 2 +-
arch/powerpc/mm/book3s64/hash_utils.c | 4 ++--
arch/powerpc/mm/book3s64/pgtable.c | 2 +-
arch/powerpc/mm/book3s64/radix_pgtable.c | 2 +-
arch/powerpc/mm/book3s64/radix_tlb.c | 2 +-
arch/powerpc/mm/book3s64/slb.c | 4 ++--
arch/powerpc/mm/init_64.c | 4 ++--
arch/powerpc/mm/nohash/book3e_hugetlbpage.c | 2 +-
arch/powerpc/mm/nohash/kaslr_booke.c | 2 +-
arch/powerpc/mm/pgtable-frag.c | 2 +-
arch/powerpc/perf/8xx-pmu.c | 2 +-
arch/powerpc/perf/core-book3s.c | 6 +++---
arch/powerpc/perf/imc-pmu.c | 4 ++--
arch/powerpc/perf/isa207-common.c | 6 +++---
arch/powerpc/platforms/512x/clock-commonclk.c | 2 +-
arch/powerpc/platforms/512x/mpc512x_shared.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_common.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 2 +-
arch/powerpc/platforms/86xx/gef_ppc9a.c | 2 +-
arch/powerpc/platforms/86xx/gef_sbc310.c | 2 +-
arch/powerpc/platforms/86xx/gef_sbc610.c | 2 +-
arch/powerpc/platforms/book3s/vas-api.c | 2 +-
arch/powerpc/platforms/cell/cbe_regs.c | 2 +-
arch/powerpc/platforms/cell/iommu.c | 2 +-
arch/powerpc/platforms/cell/spider-pci.c | 2 +-
arch/powerpc/platforms/cell/spu_manage.c | 2 +-
arch/powerpc/platforms/powermac/low_i2c.c | 2 +-
arch/powerpc/platforms/powernv/eeh-powernv.c | 10 +++++-----
arch/powerpc/platforms/powernv/idle.c | 4 ++--
arch/powerpc/platforms/powernv/ocxl.c | 2 +-
arch/powerpc/platforms/powernv/opal-fadump.c | 2 +-
arch/powerpc/platforms/powernv/opal-lpc.c | 2 +-
arch/powerpc/platforms/powernv/opal-memory-errors.c | 2 +-
arch/powerpc/platforms/powernv/pci-sriov.c | 2 +-
arch/powerpc/platforms/ps3/mm.c | 2 +-
arch/powerpc/platforms/ps3/system-bus.c | 2 +-
arch/powerpc/platforms/pseries/eeh_pseries.c | 2 +-
arch/powerpc/platforms/pseries/iommu.c | 2 +-
arch/powerpc/platforms/pseries/setup.c | 4 ++--
arch/powerpc/platforms/pseries/vas-sysfs.c | 2 +-
arch/powerpc/platforms/pseries/vas.c | 2 +-
arch/powerpc/sysdev/fsl_lbc.c | 2 +-
arch/powerpc/sysdev/fsl_pci.c | 2 +-
arch/powerpc/sysdev/ge/ge_pic.c | 2 +-
arch/powerpc/sysdev/mpic_msgr.c | 2 +-
arch/powerpc/sysdev/mpic_msi.c | 2 +-
arch/powerpc/sysdev/mpic_timer.c | 2 +-
arch/powerpc/sysdev/mpic_u3msi.c | 2 +-
arch/powerpc/sysdev/xive/native.c | 2 +-
arch/powerpc/xmon/ppc-opc.c | 2 +-
arch/powerpc/xmon/xmon.c | 2 +-
83 files changed, 104 insertions(+), 104 deletions(-)

diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c
index 888a6b9bfead..0e5532f855d6 100644
--- a/arch/powerpc/boot/cuboot-hotfoot.c
+++ b/arch/powerpc/boot/cuboot-hotfoot.c
@@ -70,7 +70,7 @@ static void hotfoot_fixups(void)

printf("Fixing devtree for 4M Flash\n");

- /* First fix up the base addresse */
+ /* First fix up the base address */
getprop(devp, "reg", regs, sizeof(regs));
regs[0] = 0;
regs[1] = 0xffc00000;
diff --git a/arch/powerpc/crypto/aes-spe-glue.c b/arch/powerpc/crypto/aes-spe-glue.c
index c2b23b69d7b1..e8dfe9fb0266 100644
--- a/arch/powerpc/crypto/aes-spe-glue.c
+++ b/arch/powerpc/crypto/aes-spe-glue.c
@@ -404,7 +404,7 @@ static int ppc_xts_decrypt(struct skcipher_request *req)

/*
* Algorithm definitions. Disabling alignment (cra_alignmask=0) was chosen
- * because the e500 platform can handle unaligned reads/writes very efficently.
+ * because the e500 platform can handle unaligned reads/writes very efficiently.
* This improves IPsec thoughput by another few percent. Additionally we assume
* that AES context is always aligned to at least 8 bytes because it is created
* with kmalloc() in the crypto infrastructure
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index ae0fdef0ac11..2a271a6d6924 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2025,7 +2025,7 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset,
* oprofile_cpu_type already has a value, then we are
* possibly overriding a real PVR with a logical one,
* and, in that case, keep the current value for
- * oprofile_cpu_type. Futhermore, let's ensure that the
+ * oprofile_cpu_type. Furthermore, let's ensure that the
* fix for the PMAO bug is enabled on compatibility mode.
*/
if (old.oprofile_cpu_type != NULL) {
diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
index 64e423d2fe0f..30d4eca88d17 100644
--- a/arch/powerpc/kernel/dawr.c
+++ b/arch/powerpc/kernel/dawr.c
@@ -27,7 +27,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
dawrx |= (brk->type & (HW_BRK_TYPE_PRIV_ALL)) >> 3;
/*
* DAWR length is stored in field MDR bits 48:53. Matches range in
- * doublewords (64 bits) baised by -1 eg. 0b000000=1DW and
+ * doublewords (64 bits) biased by -1 eg. 0b000000=1DW and
* 0b111111=64DW.
* brk->hw_len is in bytes.
* This aligns up to double word size, shifts and does the bias.
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 28bb1e7263a6..ab316e155ea9 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1329,7 +1329,7 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option)

/*
* EEH functionality could possibly be disabled, just
- * return error for the case. And the EEH functinality
+ * return error for the case. And the EEH functionality
* isn't expected to be disabled on one specific PE.
*/
switch (option) {
@@ -1804,7 +1804,7 @@ static int eeh_debugfs_break_device(struct pci_dev *pdev)
* PE freeze. Using the in_8() accessor skips the eeh detection hook
* so the freeze hook so the EEH Detection machinery won't be
* triggered here. This is to match the usual behaviour of EEH
- * where the HW will asyncronously freeze a PE and it's up to
+ * where the HW will asynchronously freeze a PE and it's up to
* the kernel to notice and deal with it.
*
* 3. Turn Memory space back on. This is more important for VFs
diff --git a/arch/powerpc/kernel/eeh_event.c b/arch/powerpc/kernel/eeh_event.c
index a7a8dc182efb..c23a454af08a 100644
--- a/arch/powerpc/kernel/eeh_event.c
+++ b/arch/powerpc/kernel/eeh_event.c
@@ -143,7 +143,7 @@ int __eeh_send_failure_event(struct eeh_pe *pe)
int eeh_send_failure_event(struct eeh_pe *pe)
{
/*
- * If we've manually supressed recovery events via debugfs
+ * If we've manually suppressed recovery events via debugfs
* then just drop it on the floor.
*/
if (eeh_debugfs_no_recover) {
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index dc2350b288cf..aa29b9b7920f 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -1665,8 +1665,8 @@ int __init setup_fadump(void)
}
/*
* Use subsys_initcall_sync() here because there is dependency with
- * crash_save_vmcoreinfo_init(), which mush run first to ensure vmcoreinfo initialization
- * is done before regisering with f/w.
+ * crash_save_vmcoreinfo_init(), which must run first to ensure vmcoreinfo initialization
+ * is done before registering with f/w.
*/
subsys_initcall_sync(setup_fadump);
#else /* !CONFIG_PRESERVE_FA_DUMP */
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index a0432ef46967..e25b796682cc 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -99,7 +99,7 @@ static unsigned long get_plt_size(const Elf32_Ehdr *hdr,

/* Sort the relocation information based on a symbol and
* addend key. This is a stable O(n*log n) complexity
- * alogrithm but it will reduce the complexity of
+ * algorithm but it will reduce the complexity of
* count_relocs() to linear complexity O(n)
*/
sort((void *)hdr + sechdrs[i].sh_offset,
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 794720530442..2cce576edbc5 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -194,7 +194,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,

/* Sort the relocation information based on a symbol and
* addend key. This is a stable O(n*log n) complexity
- * alogrithm but it will reduce the complexity of
+ * algorithm but it will reduce the complexity of
* count_relocs() to linear complexity O(n)
*/
sort((void *)sechdrs[i].sh_addr,
@@ -361,7 +361,7 @@ static inline int create_ftrace_stub(struct ppc64_stub_entry *entry,
entry->jump[1] |= PPC_HA(reladdr);
entry->jump[2] |= PPC_LO(reladdr);

- /* Eventhough we don't use funcdata in the stub, it's needed elsewhere. */
+ /* Even though we don't use funcdata in the stub, it's needed elsewhere. */
entry->funcdata = func_desc(addr);
entry->magic = STUB_MAGIC;

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 8bc9cf62cd93..9a97a93bd11c 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1688,7 +1688,7 @@ EXPORT_SYMBOL_GPL(pcibios_scan_phb);
static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
- /* When configured as agent, programing interface = 1 */
+ /* When configured as agent, programming interface = 1 */
int prog_if = dev->class & 0xf;

if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index c3024f104765..6f2b0cc1ddd6 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -244,7 +244,7 @@ EXPORT_SYMBOL(of_create_pci_dev);
* @dev: pci_dev structure for the bridge
*
* of_scan_bus() calls this routine for each PCI bridge that it finds, and
- * this routine in turn call of_scan_bus() recusively to scan for more child
+ * this routine in turn call of_scan_bus() recursively to scan for more child
* devices.
*/
void of_scan_pci_bridge(struct pci_dev *dev)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9be279469a85..3940db48db77 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -307,7 +307,7 @@ static void __giveup_vsx(struct task_struct *tsk)
unsigned long msr = tsk->thread.regs->msr;

/*
- * We should never be ssetting MSR_VSX without also setting
+ * We should never be setting MSR_VSX without also setting
* MSR_FP and MSR_VEC
*/
WARN_ON((msr & MSR_VSX) && !((msr & MSR_FP) && (msr & MSR_VEC)));
@@ -645,7 +645,7 @@ static void do_break_handler(struct pt_regs *regs)
return;
}

- /* Otherwise findout which DAWR caused exception and disable it. */
+ /* Otherwise find out which DAWR caused exception and disable it. */
wp_get_instr_detail(regs, &instr, &type, &size, &ea);

for (i = 0; i < nr_wp_slots(); i++) {
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 0ac5faacc909..ace861ec4c4c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -3416,7 +3416,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*
* PowerMacs use a different mechanism to spin CPUs
*
- * (This must be done after instanciating RTAS)
+ * (This must be done after instantiating RTAS)
*/
if (of_platform != PLATFORM_POWERMAC)
prom_hold_cpus();
diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c
index f15bc78caf71..076d867412c7 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-view.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-view.c
@@ -174,7 +174,7 @@ int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)

/*
* softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
- * no more used as a flag, lets force usr to alway see the softe value as 1
+ * no more used as a flag, lets force usr to always see the softe value as 1
* which means interrupts are not soft disabled.
*/
if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) {
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index a99179d83538..bc817a5619d6 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -120,7 +120,7 @@ static struct kmem_cache *flash_block_cache = NULL;
/*
* Local copy of the flash block list.
*
- * The rtas_firmware_flash_list varable will be
+ * The rtas_firmware_flash_list variable will be
* set once the data is fully read.
*
* For convenience as we build the list we use virtual addrs,
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 518ae5aa9410..3acf2782acdf 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -279,7 +279,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
proc_freq / 1000000, proc_freq % 1000000);

/* If we are a Freescale core do a simple check so
- * we dont have to keep adding cases in the future */
+ * we don't have to keep adding cases in the future */
if (PVR_VER(pvr) & 0x8000) {
switch (PVR_VER(pvr)) {
case 0x8000: /* 7441/7450/7451, Voyager */
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 73d483b07ff3..858fc13b8c51 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -123,7 +123,7 @@ static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc,
#endif
struct pt_regs *regs = tsk->thread.regs;
unsigned long msr = regs->msr;
- /* Force usr to alway see softe as 1 (interrupts enabled) */
+ /* Force usr to always see softe as 1 (interrupts enabled) */
unsigned long softe = 0x1;

BUG_ON(tsk != current);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index de0f6f09a5dd..a69df557e2b7 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1102,7 +1102,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
DBG("smp_prepare_cpus\n");

/*
- * setup_cpu may need to be called on the boot cpu. We havent
+ * setup_cpu may need to be called on the boot cpu. We haven't
* spun any cpus up but lets be paranoid.
*/
BUG_ON(boot_cpuid != smp_processor_id());
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index f80cce0e3899..4bf757ebe13d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -829,7 +829,7 @@ static void __read_persistent_clock(struct timespec64 *ts)
static int first = 1;

ts->tv_nsec = 0;
- /* XXX this is a litle fragile but will work okay in the short term */
+ /* XXX this is a little fragile but will work okay in the short term */
if (first) {
first = 0;
if (ppc_md.time_init)
@@ -974,7 +974,7 @@ void secondary_cpu_time_init(void)
*/
start_cpu_decrementer();

- /* FIME: Should make unrelatred change to move snapshot_timebase
+ /* FIME: Should make unrelated change to move snapshot_timebase
* call here ! */
register_decrementer_clockevent(smp_processor_id());
}
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index bfc27496fe7e..7d28b9553654 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -56,7 +56,7 @@
* solved by also having a SMP watchdog where all CPUs check all other
* CPUs heartbeat.
*
- * The SMP checker can detect lockups on other CPUs. A gobal "pending"
+ * The SMP checker can detect lockups on other CPUs. A global "pending"
* cpumask is kept, containing all CPUs which enable the watchdog. Each
* CPU clears their pending bit in their heartbeat timer. When the bitmask
* becomes empty, the last CPU to clear its pending bit updates a global
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 6cc7793b8420..c29c639551fe 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -406,7 +406,7 @@ static int __init export_htab_values(void)
if (!node)
return -ENODEV;

- /* remove any stale propertys so ours can be found */
+ /* remove any stale properties so ours can be found */
of_remove_property(node, of_find_property(node, htab_base_prop.name, NULL));
of_remove_property(node, of_find_property(node, htab_size_prop.name, NULL));

diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 0aeb51738ca9..1137c4df726c 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -58,7 +58,7 @@ struct kvm_resize_hpt {
/* Possible values and their usage:
* <0 an error occurred during allocation,
* -EBUSY allocation is in the progress,
- * 0 allocation made successfuly.
+ * 0 allocation made successfully.
*/
int error;

diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c
index fdeda6a9cff4..fdcc7b287dd8 100644
--- a/arch/powerpc/kvm/book3s_64_vio_hv.c
+++ b/arch/powerpc/kvm/book3s_64_vio_hv.c
@@ -453,7 +453,7 @@ static long kvmppc_rm_ua_to_hpa(struct kvm_vcpu *vcpu, unsigned long mmu_seq,
* we are doing this on secondary cpus and current task there
* is not the hypervisor. Also this is safe against THP in the
* host, because an IPI to primary thread will wait for the secondary
- * to exit which will agains result in the below page table walk
+ * to exit which will again result in the below page table walk
* to finish.
*/
/* an rmap lock won't make it safe. because that just ensure hash
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
index fdb57be71aa6..5bbfb2eed127 100644
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -268,7 +268,7 @@ int kvmppc_core_emulate_op_pr(struct kvm_vcpu *vcpu,

/*
* add rules to fit in ISA specification regarding TM
- * state transistion in TM disable/Suspended state,
+ * state transition in TM disable/Suspended state,
* and target TM state is TM inactive(00) state. (the
* change should be suppressed).
*/
diff --git a/arch/powerpc/kvm/book3s_hv_p9_entry.c b/arch/powerpc/kvm/book3s_hv_p9_entry.c
index a28e5b3daabd..ac38c1cad378 100644
--- a/arch/powerpc/kvm/book3s_hv_p9_entry.c
+++ b/arch/powerpc/kvm/book3s_hv_p9_entry.c
@@ -379,7 +379,7 @@ void restore_p9_host_os_sprs(struct kvm_vcpu *vcpu,
{
/*
* current->thread.xxx registers must all be restored to host
- * values before a potential context switch, othrewise the context
+ * values before a potential context switch, otherwise the context
* switch itself will overwrite current->thread.xxx with the values
* from the guest SPRs.
*/
diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c
index 36f2314c58e5..598006301620 100644
--- a/arch/powerpc/kvm/book3s_hv_uvmem.c
+++ b/arch/powerpc/kvm/book3s_hv_uvmem.c
@@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(kvmppc_uvmem_bitmap_lock);
* content is un-encrypted.
*
* (c) Normal - The GFN is a normal. The GFN is associated with
- * a normal VM. The contents of the GFN is accesible to
+ * a normal VM. The contents of the GFN is accessible to
* the Hypervisor. Its content is never encrypted.
*
* States of a VM.
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 7bf9e6ca5c2d..d6abed6e51e6 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -1287,7 +1287,7 @@ int kvmppc_handle_exit_pr(struct kvm_vcpu *vcpu, unsigned int exit_nr)

/* Get last sc for papr */
if (vcpu->arch.papr_enabled) {
- /* The sc instuction points SRR0 to the next inst */
+ /* The sc instruction points SRR0 to the next inst */
emul = kvmppc_get_last_inst(vcpu, INST_SC, &last_sc);
if (emul != EMULATE_DONE) {
kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) - 4);
diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c
index ab6d37d78c62..589a8f257120 100644
--- a/arch/powerpc/kvm/book3s_xics.c
+++ b/arch/powerpc/kvm/book3s_xics.c
@@ -462,7 +462,7 @@ static void icp_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp,
* new guy. We cannot assume that the rejected interrupt is less
* favored than the new one, and thus doesn't need to be delivered,
* because by the time we exit icp_try_to_deliver() the target
- * processor may well have alrady consumed & completed it, and thus
+ * processor may well have already consumed & completed it, and thus
* the rejected interrupt might actually be already acceptable.
*/
if (icp_try_to_deliver(icp, new_irq, state->priority, &reject)) {
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index c0ce5531d9bc..24d434f1f012 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -124,7 +124,7 @@ void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu)
* interrupt might have fired and be on its way to the
* host queue while we mask it, and if we unmask it
* early enough (re-cede right away), there is a
- * theorical possibility that it fires again, thus
+ * theoretical possibility that it fires again, thus
* landing in the target queue more than once which is
* a big no-no.
*
@@ -622,7 +622,7 @@ static int xive_target_interrupt(struct kvm *kvm,

/*
* Targetting rules: In order to avoid losing track of
- * pending interrupts accross mask and unmask, which would
+ * pending interrupts across mask and unmask, which would
* allow queue overflows, we implement the following rules:
*
* - Unless it was never enabled (or we run out of capacity)
@@ -1073,7 +1073,7 @@ int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq,
/*
* If old_p is set, the interrupt is pending, we switch it to
* PQ=11. This will force a resend in the host so the interrupt
- * isn't lost to whatver host driver may pick it up
+ * isn't lost to whatever host driver may pick it up
*/
if (state->old_p)
xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_11);
diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c
index fa0d8dbbe484..4ff1372e48d4 100644
--- a/arch/powerpc/kvm/e500mc.c
+++ b/arch/powerpc/kvm/e500mc.c
@@ -309,7 +309,7 @@ static int kvmppc_core_vcpu_create_e500mc(struct kvm_vcpu *vcpu)
BUILD_BUG_ON(offsetof(struct kvmppc_vcpu_e500, vcpu) != 0);
vcpu_e500 = to_e500(vcpu);

- /* Invalid PIR value -- this LPID dosn't have valid state on any cpu */
+ /* Invalid PIR value -- this LPID doesn't have valid state on any cpu */
vcpu->arch.oldpir = 0xffffffff;

err = kvmppc_e500_tlb_init(vcpu_e500);
diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c
index 7ce8914992e3..2e0cad5817ba 100644
--- a/arch/powerpc/mm/book3s64/hash_pgtable.c
+++ b/arch/powerpc/mm/book3s64/hash_pgtable.c
@@ -377,7 +377,7 @@ int hash__has_transparent_hugepage(void)
if (mmu_psize_defs[MMU_PAGE_16M].shift != PMD_SHIFT)
return 0;
/*
- * We need to make sure that we support 16MB hugepage in a segement
+ * We need to make sure that we support 16MB hugepage in a segment
* with base page size 64K or 4K. We only enable THP with a PAGE_SIZE
* of 64K.
*/
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 985cabdd7f67..5b69b271707e 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1343,7 +1343,7 @@ static int subpage_protection(struct mm_struct *mm, unsigned long ea)
spp >>= 30 - 2 * ((ea >> 12) & 0xf);

/*
- * 0 -> full premission
+ * 0 -> full permission
* 1 -> Read only
* 2 -> no access.
* We return the flag that need to be cleared.
@@ -1664,7 +1664,7 @@ DEFINE_INTERRUPT_HANDLER(do_hash_fault)

err = hash_page_mm(mm, ea, access, TRAP(regs), flags);
if (unlikely(err < 0)) {
- // failed to instert a hash PTE due to an hypervisor error
+ // failed to insert a hash PTE due to an hypervisor error
if (user_mode(regs)) {
if (IS_ENABLED(CONFIG_PPC_SUBPAGE_PROT) && err == -2)
_exception(SIGSEGV, regs, SEGV_ACCERR, ea);
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index 052e6590f84f..071bb66c3ad9 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -331,7 +331,7 @@ static pmd_t *__alloc_for_pmdcache(struct mm_struct *mm)
spin_lock(&mm->page_table_lock);
/*
* If we find pgtable_page set, we return
- * the allocated page with single fragement
+ * the allocated page with single fragment
* count.
*/
if (likely(!mm->context.pmd_frag)) {
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index def04631a74d..db2f3d193448 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -359,7 +359,7 @@ static void __init radix_init_pgtable(void)
if (!cpu_has_feature(CPU_FTR_HVMODE) &&
cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) {
/*
- * Older versions of KVM on these machines perfer if the
+ * Older versions of KVM on these machines prefer if the
* guest only uses the low 19 PID bits.
*/
mmu_pid_bits = 19;
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 7724af19ed7e..dda51fef2d2e 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -397,7 +397,7 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric)

/*
* Workaround the fact that the "ric" argument to __tlbie_pid
- * must be a compile-time contraint to match the "i" constraint
+ * must be a compile-time constraint to match the "i" constraint
* in the asm statement.
*/
switch (ric) {
diff --git a/arch/powerpc/mm/book3s64/slb.c b/arch/powerpc/mm/book3s64/slb.c
index 81091b9587f6..6956f637a38c 100644
--- a/arch/powerpc/mm/book3s64/slb.c
+++ b/arch/powerpc/mm/book3s64/slb.c
@@ -347,7 +347,7 @@ void slb_setup_new_exec(void)
/*
* We have no good place to clear the slb preload cache on exec,
* flush_thread is about the earliest arch hook but that happens
- * after we switch to the mm and have aleady preloaded the SLBEs.
+ * after we switch to the mm and have already preloaded the SLBEs.
*
* For the most part that's probably okay to use entries from the
* previous exec, they will age out if unused. It may turn out to
@@ -615,7 +615,7 @@ static void slb_cache_update(unsigned long esid_data)
} else {
/*
* Our cache is full and the current cache content strictly
- * doesn't indicate the active SLB conents. Bump the ptr
+ * doesn't indicate the active SLB contents. Bump the ptr
* so that switch_slb() will ignore the cache.
*/
local_paca->slb_cache_ptr = SLB_CACHE_ENTRIES + 1;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 83c0ee9fbf05..2e11952057f8 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -111,7 +111,7 @@ static int __meminit vmemmap_populated(unsigned long vmemmap_addr, int vmemmap_m
}

/*
- * vmemmap virtual address space management does not have a traditonal page
+ * vmemmap virtual address space management does not have a traditional page
* table to track which virtual struct pages are backed by physical mapping.
* The virtual to physical mappings are tracked in a simple linked list
* format. 'vmemmap_list' maintains the entire vmemmap physical mapping at
@@ -128,7 +128,7 @@ static struct vmemmap_backing *next;

/*
* The same pointer 'next' tracks individual chunks inside the allocated
- * full page during the boot time and again tracks the freeed nodes during
+ * full page during the boot time and again tracks the freed nodes during
* runtime. It is racy but it does not happen as they are separated by the
* boot process. Will create problem if some how we have memory hotplug
* operation during boot !!
diff --git a/arch/powerpc/mm/nohash/book3e_hugetlbpage.c b/arch/powerpc/mm/nohash/book3e_hugetlbpage.c
index 8b88be91b622..307ca919d393 100644
--- a/arch/powerpc/mm/nohash/book3e_hugetlbpage.c
+++ b/arch/powerpc/mm/nohash/book3e_hugetlbpage.c
@@ -142,7 +142,7 @@ book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, pte_t pte)
tsize = shift - 10;
/*
* We can't be interrupted while we're setting up the MAS
- * regusters or after we've confirmed that no tlb exists.
+ * registers or after we've confirmed that no tlb exists.
*/
local_irq_save(flags);

diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c
index 5f81c076621f..37eb8d80bd53 100644
--- a/arch/powerpc/mm/nohash/kaslr_booke.c
+++ b/arch/powerpc/mm/nohash/kaslr_booke.c
@@ -311,7 +311,7 @@ static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size
ram = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, true, true);
linear_sz = min_t(unsigned long, ram, SZ_512M);

- /* If the linear size is smaller than 64M, do not randmize */
+ /* If the linear size is smaller than 64M, do not randomize */
if (linear_sz < SZ_64M)
return 0;

diff --git a/arch/powerpc/mm/pgtable-frag.c b/arch/powerpc/mm/pgtable-frag.c
index 97ae4935da79..20652daa1d7e 100644
--- a/arch/powerpc/mm/pgtable-frag.c
+++ b/arch/powerpc/mm/pgtable-frag.c
@@ -83,7 +83,7 @@ static pte_t *__alloc_for_ptecache(struct mm_struct *mm, int kernel)
spin_lock(&mm->page_table_lock);
/*
* If we find pgtable_page set, we return
- * the allocated page with single fragement
+ * the allocated page with single fragment
* count.
*/
if (likely(!pte_frag_get(&mm->context))) {
diff --git a/arch/powerpc/perf/8xx-pmu.c b/arch/powerpc/perf/8xx-pmu.c
index 4738c4dbf567..308a2e40d7be 100644
--- a/arch/powerpc/perf/8xx-pmu.c
+++ b/arch/powerpc/perf/8xx-pmu.c
@@ -157,7 +157,7 @@ static void mpc8xx_pmu_del(struct perf_event *event, int flags)

mpc8xx_pmu_read(event);

- /* If it was the last user, stop counting to avoid useles overhead */
+ /* If it was the last user, stop counting to avoid useless overhead */
switch (event_type(event)) {
case PERF_8xx_ID_CPU_CYCLES:
break;
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 3adc08254875..03c64a0195df 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1142,7 +1142,7 @@ static u64 check_and_compute_delta(u64 prev, u64 val)
/*
* POWER7 can roll back counter values, if the new value is smaller
* than the previous value it will cause the delta and the counter to
- * have bogus values unless we rolled a counter over. If a coutner is
+ * have bogus values unless we rolled a counter over. If a counter is
* rolled back, it will be smaller, but within 256, which is the maximum
* number of events to rollback at once. If we detect a rollback
* return 0. This can lead to a small lack of precision in the
@@ -2052,7 +2052,7 @@ static int power_pmu_event_init(struct perf_event *event)
/*
* PMU config registers have fields that are
* reserved and some specific values for bit fields are reserved.
- * For ex., MMCRA[61:62] is Randome Sampling Mode (SM)
+ * For ex., MMCRA[61:62] is Random Sampling Mode (SM)
* and value of 0b11 to this field is reserved.
* Check for invalid values in attr.config.
*/
@@ -2442,7 +2442,7 @@ static void __perf_event_interrupt(struct pt_regs *regs)
}

/*
- * During system wide profling or while specific CPU is monitored for an
+ * During system wide profiling or while specific CPU is monitored for an
* event, some corner cases could cause PMC to overflow in idle path. This
* will trigger a PMI after waking up from idle. Since counter values are _not_
* saved/restored in idle path, can lead to below "Can't find PMC" message.
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index 526d4b767534..498f1a2f7658 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -521,7 +521,7 @@ static int nest_imc_event_init(struct perf_event *event)

/*
* Nest HW counter memory resides in a per-chip reserve-memory (HOMER).
- * Get the base memory addresss for this cpu.
+ * Get the base memory address for this cpu.
*/
chip_id = cpu_to_chip_id(event->cpu);

@@ -674,7 +674,7 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
/*
* Check whether core_imc is registered. We could end up here
* if the cpuhotplug callback registration fails. i.e, callback
- * invokes the offline path for all sucessfully registered cpus.
+ * invokes the offline path for all successfully registered cpus.
* At this stage, core_imc pmu will not be registered and we
* should return here.
*
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index bb5d64862bc9..42abbcfc73da 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -82,11 +82,11 @@ static unsigned long sdar_mod_val(u64 event)
static void mmcra_sdar_mode(u64 event, unsigned long *mmcra)
{
/*
- * MMCRA[SDAR_MODE] specifices how the SDAR should be updated in
- * continous sampling mode.
+ * MMCRA[SDAR_MODE] specifies how the SDAR should be updated in
+ * continuous sampling mode.
*
* Incase of Power8:
- * MMCRA[SDAR_MODE] will be programmed as "0b01" for continous sampling
+ * MMCRA[SDAR_MODE] will be programmed as "0b01" for continuous sampling
* mode and will be un-changed when setting MMCRA[63] (Marked events).
*
* Incase of Power9/power10:
diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c
index 0b03d812baae..0652c7e69225 100644
--- a/arch/powerpc/platforms/512x/clock-commonclk.c
+++ b/arch/powerpc/platforms/512x/clock-commonclk.c
@@ -663,7 +663,7 @@ static void __init mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t
* the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK
* for their bitrate
* - in the absence of "aliases" for clocks we need to create
- * individial 'struct clk' items for whatever might get
+ * individual 'struct clk' items for whatever might get
* referenced or looked up, even if several of those items are
* identical from the logical POV (their rate value)
* - for easier future maintenance and for better reflection of
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index e3411663edad..96d9cf49560d 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -289,7 +289,7 @@ static void __init mpc512x_setup_diu(void)

/*
* We do not allocate and configure new area for bitmap buffer
- * because it would requere copying bitmap data (splash image)
+ * because it would require copying bitmap data (splash image)
* and so negatively affect boot time. Instead we reserve the
* already configured frame buffer area so that it won't be
* destroyed. The starting address of the area to reserve and
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 565e3a83dc9e..60aa6015e284 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -308,7 +308,7 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number)

spin_lock_irqsave(&gpio_lock, flags);

- /* Reconfiure pin-muxing to gpio */
+ /* Reconfigure pin-muxing to gpio */
mux = in_be32(&simple_gpio->port_config);
out_be32(&simple_gpio->port_config, mux & (~gpio));

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index f862b48b4824..7252d992ca9f 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -398,7 +398,7 @@ static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period,
set |= MPC52xx_GPT_MODE_CONTINUOUS;

/* Determine the number of clocks in the requested period. 64 bit
- * arithmatic is done here to preserve the precision until the value
+ * arithmetic is done here to preserve the precision until the value
* is scaled back down into the u32 range. Period is in 'ns', bus
* frequency is in Hz. */
clocks = period * (u64)gpt->ipb_freq;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index b91ebebd9ff2..54dfc63809d3 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -104,7 +104,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
*
* Configure the watermarks so DMA will always complete correctly.
* It may be worth experimenting with the ALARM value to see if
- * there is a performance impacit. However, if it is wrong there
+ * there is a performance impact. However, if it is wrong there
* is a risk of DMA not transferring the last chunk of data
*/
if (write) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 5bd487030256..ad0b88ecfd0c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -151,7 +151,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
*/
case PCI_DEVICE_ID_VIA_82C586_2:
/* There are two USB controllers.
- * Identify them by functon number
+ * Identify them by function number
*/
if (PCI_FUNC(dev->devfn) == 3)
dev->irq = 11;
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 44bbbc535e1d..884da08806ce 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -180,7 +180,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
*
* This function is called to determine whether the BSP is compatible with the
* supplied device-tree, which is assumed to be the correct one for the actual
- * board. It is expected thati, in the future, a kernel may support multiple
+ * board. It is expected that, in the future, a kernel may support multiple
* boards.
*/
static int __init gef_ppc9a_probe(void)
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 46d6d3d4957a..baaf1ab07016 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -167,7 +167,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
*
* This function is called to determine whether the BSP is compatible with the
* supplied device-tree, which is assumed to be the correct one for the actual
- * board. It is expected thati, in the future, a kernel may support multiple
+ * board. It is expected that, in the future, a kernel may support multiple
* boards.
*/
static int __init gef_sbc310_probe(void)
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index acf2c6c3c1eb..120caf6af71d 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -157,7 +157,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
*
* This function is called to determine whether the BSP is compatible with the
* supplied device-tree, which is assumed to be the correct one for the actual
- * board. It is expected thati, in the future, a kernel may support multiple
+ * board. It is expected that, in the future, a kernel may support multiple
* boards.
*/
static int __init gef_sbc610_probe(void)
diff --git a/arch/powerpc/platforms/book3s/vas-api.c b/arch/powerpc/platforms/book3s/vas-api.c
index f9a1615b74da..c0799fb26b6d 100644
--- a/arch/powerpc/platforms/book3s/vas-api.c
+++ b/arch/powerpc/platforms/book3s/vas-api.c
@@ -30,7 +30,7 @@
*
* where "vas_copy" and "vas_paste" are defined in copy-paste.h.
* copy/paste returns to the user space directly. So refer NX hardware
- * documententation for exact copy/paste usage and completion / error
+ * documentation for exact copy/paste usage and completion / error
* conditions.
*/

diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index 1c4c53bec66c..03512a41bd7e 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -23,7 +23,7 @@
* Current implementation uses "cpu" nodes. We build our own mapping
* array of cpu numbers to cpu nodes locally for now to allow interrupt
* time code to have a fast path rather than call of_get_cpu_node(). If
- * we implement cpu hotplug, we'll have to install an appropriate norifier
+ * we implement cpu hotplug, we'll have to install an appropriate notifier
* in order to release references to the cpu going away
*/
static struct cbe_regs_map
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 25e726bf0172..3f141cf5e580 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -582,7 +582,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
{
struct device *dev = data;

- /* We are only intereted in device addition */
+ /* We are only interested in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;

diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index a1c293f42a1f..3a2ea8376e32 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -81,7 +81,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
/*
* On CellBlade, we can't know that which XDR memory is used by
* kmalloc() to allocate dummy_page_va.
- * In order to imporve the performance, the XDR which is used to
+ * In order to improve the performance, the XDR which is used to
* allocate dummy_page_va is the nearest the spider-pci.
* We have to select the CBE which is the nearest the spider-pci
* to allocate memory from the best XDR, but I don't know that
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index ddf8742f09a3..080ed2d2c682 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -457,7 +457,7 @@ static void __init init_affinity_node(int cbe)

/*
* Walk through each phandle in vicinity property of the spu
- * (tipically two vicinity phandles per spe node)
+ * (typically two vicinity phandles per spe node)
*/
for (i = 0; i < (lenp / sizeof(phandle)); i++) {
if (vic_handles[i] == avoid_ph)
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index df89d916236d..9aded0188ce8 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1472,7 +1472,7 @@ int __init pmac_i2c_init(void)
smu_i2c_probe();
#endif

- /* Now add plaform functions for some known devices */
+ /* Now add platform functions for some known devices */
pmac_i2c_devscan(pmac_i2c_dev_create);

return 0;
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 89e22c460ebf..33f7b959c810 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -390,7 +390,7 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
* should be blocked until PE reset. MMIO access is dropped
* by hardware certainly. In order to drop PCI config requests,
* one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
- * will be checked in the backend for PE state retrival. If
+ * will be checked in the backend for PE state retrieval. If
* the PE becomes frozen for the first time and the flag has
* been set for the PE, we will set EEH_PE_CFG_BLOCKED for
* that PE to block its config space.
@@ -981,7 +981,7 @@ static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option)
case EEH_RESET_FUNDAMENTAL:
/*
* Wait for Transaction Pending bit to clear. A word-aligned
- * test is used, so we use the conrol offset rather than status
+ * test is used, so we use the control offset rather than status
* and shift the test bit to match.
*/
pnv_eeh_wait_for_pending(pdn, "AF",
@@ -1048,7 +1048,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
* frozen state during PE reset. However, the good idea here from
* benh is to keep frozen state before we get PE reset done completely
* (until BAR restore). With the frozen state, HW drops illegal IO
- * or MMIO access, which can incur recrusive frozen PE during PE
+ * or MMIO access, which can incur recursive frozen PE during PE
* reset. The side effect is that EEH core has to clear the frozen
* state explicitly after BAR restore.
*/
@@ -1095,8 +1095,8 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
* bus is behind a hotplug slot and it will use the slot provided
* reset methods to prevent spurious hotplug events during the reset.
*
- * Fundemental resets need to be handled internally to EEH since the
- * PCI core doesn't really have a concept of a fundemental reset,
+ * Fundamental resets need to be handled internally to EEH since the
+ * PCI core doesn't really have a concept of a fundamental reset,
* mainly because there's no standard way to generate one. Only a
* few devices require an FRESET so it should be fine.
*/
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index a6677a111aca..6f94b808dd39 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -112,7 +112,7 @@ static int __init pnv_save_sprs_for_deep_states(void)
if (rc != 0)
return rc;

- /* Only p8 needs to set extra HID regiters */
+ /* Only p8 needs to set extra HID registers */
if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
uint64_t hid1_val = mfspr(SPRN_HID1);
uint64_t hid4_val = mfspr(SPRN_HID4);
@@ -1204,7 +1204,7 @@ static void __init pnv_arch300_idle_init(void)
* The idle code does not deal with TB loss occurring
* in a shallower state than SPR loss, so force it to
* behave like SPRs are lost if TB is lost. POWER9 would
- * never encouter this, but a POWER8 core would if it
+ * never encounter this, but a POWER8 core would if it
* implemented the stop instruction. So this is for forward
* compatibility.
*/
diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
index 28b009b46464..27c936075031 100644
--- a/arch/powerpc/platforms/powernv/ocxl.c
+++ b/arch/powerpc/platforms/powernv/ocxl.c
@@ -289,7 +289,7 @@ int pnv_ocxl_get_pasid_count(struct pci_dev *dev, int *count)
* be used by a function depends on how many functions exist
* on the device. The NPU needs to be configured to know how
* many bits are available to PASIDs and how many are to be
- * used by the function BDF indentifier.
+ * used by the function BDF identifier.
*
* We only support one AFU-carrying function for now.
*/
diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c
index 9d74d3950a52..c1bcd2d4826e 100644
--- a/arch/powerpc/platforms/powernv/opal-fadump.c
+++ b/arch/powerpc/platforms/powernv/opal-fadump.c
@@ -206,7 +206,7 @@ static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf)
opal_fdm->region_cnt = cpu_to_be16(reg_cnt);

/*
- * Kernel metadata is passed to f/w and retrieved in capture kerenl.
+ * Kernel metadata is passed to f/w and retrieved in capture kernel.
* So, use it to save fadump header address instead of calculating it.
*/
opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) +
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 5390c888db16..d129d6d45a50 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -197,7 +197,7 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,

/*
* Select access size based on count and alignment and
- * access type. IO and MEM only support byte acceses,
+ * access type. IO and MEM only support byte accesses,
* FW supports all 3.
*/
len = 1;
diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c
index 1e8e17df9ce8..a1754a28265d 100644
--- a/arch/powerpc/platforms/powernv/opal-memory-errors.c
+++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c
@@ -82,7 +82,7 @@ static DECLARE_WORK(mem_error_work, mem_error_handler);

/*
* opal_memory_err_event - notifier handler that queues up the opal message
- * to be preocessed later.
+ * to be processed later.
*/
static int opal_memory_err_event(struct notifier_block *nb,
unsigned long msg_type, void *msg)
diff --git a/arch/powerpc/platforms/powernv/pci-sriov.c b/arch/powerpc/platforms/powernv/pci-sriov.c
index 04155aaaadb1..fe3d111b881c 100644
--- a/arch/powerpc/platforms/powernv/pci-sriov.c
+++ b/arch/powerpc/platforms/powernv/pci-sriov.c
@@ -699,7 +699,7 @@ static int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
return -ENOSPC;
}

- /* allocate a contigious block of PEs for our VFs */
+ /* allocate a contiguous block of PEs for our VFs */
base_pe = pnv_ioda_alloc_pe(phb, num_vfs);
if (!base_pe) {
pci_err(pdev, "Unable to allocate PEs for %d VFs\n", num_vfs);
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 5ce924611b94..63ef61ed7597 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -364,7 +364,7 @@ static void __maybe_unused _dma_dump_region(const struct ps3_dma_region *r,
* @bus_addr: Starting ioc bus address of the area to map.
* @len: Length in bytes of the area to map.
* @link: A struct list_head used with struct ps3_dma_region.chunk_list, the
- * list of all chuncks owned by the region.
+ * list of all chunks owned by the region.
*
* This implementation uses a very simple dma page manager
* based on the dma_chunk structure. This scheme assumes
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index b637bf292047..2502e9b17df4 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -601,7 +601,7 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page,
iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
break;
default:
- /* not happned */
+ /* not happened */
BUG();
}
result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 09fafcf2d3a0..f0b2bca750da 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -510,7 +510,7 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
int ret = 0;

/*
- * When we're enabling or disabling EEH functioality on
+ * When we're enabling or disabling EEH functionality on
* the particular PE, the PE config address is possibly
* unavailable. Therefore, we have to figure it out from
* the FDT node.
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 4d991cf840d9..7639e7355df2 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1430,7 +1430,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)

pci->table_group->tables[1] = newtbl;

- /* Keep default DMA window stuct if removed */
+ /* Keep default DMA window struct if removed */
if (default_win_removed) {
tbl->it_size = 0;
vfree(tbl->it_map);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index f27735f623ba..27bed0dd866e 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -658,7 +658,7 @@ static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
*/
num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
if (resno >= num_res)
- return 0; /* or an errror */
+ return 0; /* or an error */

i = START_OF_ENTRIES + NEXT_ENTRY * resno;
switch (value) {
@@ -762,7 +762,7 @@ static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev)

if (!pdev->is_physfn)
return;
- /*Firmware must support open sriov otherwise dont configure*/
+ /*Firmware must support open sriov otherwise don't configure*/
indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
if (indexes)
of_pci_parse_iov_addrs(pdev, indexes);
diff --git a/arch/powerpc/platforms/pseries/vas-sysfs.c b/arch/powerpc/platforms/pseries/vas-sysfs.c
index ec65586cbeb3..241c84374045 100644
--- a/arch/powerpc/platforms/pseries/vas-sysfs.c
+++ b/arch/powerpc/platforms/pseries/vas-sysfs.c
@@ -76,7 +76,7 @@ struct vas_sysfs_entry {
* Create sysfs interface:
* /sys/devices/vas/vas0/gzip/default_capabilities
* This directory contains the following VAS GZIP capabilities
- * for the defaule credit type.
+ * for the default credit type.
* /sys/devices/vas/vas0/gzip/default_capabilities/nr_total_credits
* Total number of default credits assigned to the LPAR which
* can be changed with DLPAR operation.
diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c
index ec643bbdb67f..500a1fc4a1d7 100644
--- a/arch/powerpc/platforms/pseries/vas.c
+++ b/arch/powerpc/platforms/pseries/vas.c
@@ -801,7 +801,7 @@ int vas_reconfig_capabilties(u8 type, int new_nr_creds)
atomic_set(&caps->nr_total_credits, new_nr_creds);
/*
* The total number of available credits may be decreased or
- * inceased with DLPAR operation. Means some windows have to be
+ * increased with DLPAR operation. Means some windows have to be
* closed / reopened. Hold the vas_pseries_mutex so that the
* the user space can not open new windows.
*/
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 1985e067e952..18acfb4e82af 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -37,7 +37,7 @@ EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
*
* This function converts a base address of lbc into the right format for the
* BR register. If the SOC has eLBC then it returns 32bit physical address
- * else it convers a 34bit local bus physical address to correct format of
+ * else it converts a 34bit local bus physical address to correct format of
* 32bit address for BR register (Example: MPC8641).
*/
u32 fsl_lbc_addr(phys_addr_t addr_base)
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ef49ead8bf2e..3c430a6a6a4e 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -218,7 +218,7 @@ static void setup_pci_atmu(struct pci_controller *hose)
* windows have implemented the default target value as 0xf
* for CCSR space.In all Freescale legacy devices the target
* of 0xf is reserved for local memory space. 9132 Rev1.0
- * now has local mempry space mapped to target 0x0 instead of
+ * now has local memory space mapped to target 0x0 instead of
* 0xf. Hence adding a workaround to remove the target 0xf
* defined for memory space from Inbound window attributes.
*/
diff --git a/arch/powerpc/sysdev/ge/ge_pic.c b/arch/powerpc/sysdev/ge/ge_pic.c
index 02553a8ce191..413b375c4d28 100644
--- a/arch/powerpc/sysdev/ge/ge_pic.c
+++ b/arch/powerpc/sysdev/ge/ge_pic.c
@@ -150,7 +150,7 @@ static struct irq_chip gef_pic_chip = {
};


-/* When an interrupt is being configured, this call allows some flexibilty
+/* When an interrupt is being configured, this call allows some flexibility
* in deciding which irq_chip structure is used
*/
static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 36ec0bdd8b63..a25413826b63 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -99,7 +99,7 @@ void mpic_msgr_disable(struct mpic_msgr *msgr)
EXPORT_SYMBOL_GPL(mpic_msgr_disable);

/* The following three functions are used to compute the order and number of
- * the message register blocks. They are clearly very inefficent. However,
+ * the message register blocks. They are clearly very inefficient. However,
* they are called *only* a few times during device initialization.
*/
static unsigned int mpic_msgr_number_of_blocks(void)
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index f412d6ad0b66..9936c014ac7d 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -37,7 +37,7 @@ static int __init mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
/* Reserve source numbers we know are reserved in the HW.
*
* This is a bit of a mix of U3 and U4 reserves but that's going
- * to work fine, we have plenty enugh numbers left so let's just
+ * to work fine, we have plenty enough numbers left so let's just
* mark anything we don't like reserved.
*/
for (i = 0; i < 8; i++)
diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c
index 444e9ce42d0a..b2f0a73e8f93 100644
--- a/arch/powerpc/sysdev/mpic_timer.c
+++ b/arch/powerpc/sysdev/mpic_timer.c
@@ -255,7 +255,7 @@ EXPORT_SYMBOL(mpic_start_timer);

/**
* mpic_stop_timer - stop hardware timer
- * @handle: the timer to be stoped
+ * @handle: the timer to be stopped
*
* The timer periodically generates an interrupt. Unless user stops the timer.
*/
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 3f4841dfefb5..73d129594078 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -78,7 +78,7 @@ static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq)

/* U4 PCIe MSIs need to write to the special register in
* the bridge that generates interrupts. There should be
- * theorically a register at 0xf8005000 where you just write
+ * theoretically a register at 0xf8005000 where you just write
* the MSI number and that triggers the right interrupt, but
* unfortunately, this is busted in HW, the bridge endian swaps
* the value and hits the wrong nibble in the register.
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index f940428ad13f..45f72fc715fc 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -617,7 +617,7 @@ bool __init xive_native_init(void)

xive_tima_os = r.start;

- /* Grab size of provisionning pages */
+ /* Grab size of provisioning pages */
xive_parse_provisioning(np);

/* Switch the XIVE to exploitation mode */
diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
index dfb80810b16c..0774d711453e 100644
--- a/arch/powerpc/xmon/ppc-opc.c
+++ b/arch/powerpc/xmon/ppc-opc.c
@@ -408,7 +408,7 @@ const struct powerpc_operand powerpc_operands[] =
#define FXM4 FXM + 1
{ 0xff, 12, insert_fxm, extract_fxm,
PPC_OPERAND_OPTIONAL | PPC_OPERAND_OPTIONAL_VALUE},
- /* If the FXM4 operand is ommitted, use the sentinel value -1. */
+ /* If the FXM4 operand is omitted, use the sentinel value -1. */
{ -1, -1, NULL, NULL, 0},

/* The IMM20 field in an LI instruction. */
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index fd72753e8ad5..27da7d5c2024 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2024,7 +2024,7 @@ static void dump_206_sprs(void)
if (!cpu_has_feature(CPU_FTR_ARCH_206))
return;

- /* Actually some of these pre-date 2.06, but whatevs */
+ /* Actually some of these pre-date 2.06, but whatever */

printf("srr0 = %.16lx srr1 = %.16lx dsisr = %.8lx\n",
mfspr(SPRN_SRR0), mfspr(SPRN_SRR1), mfspr(SPRN_DSISR));
--
2.35.1