[PATCH 5.19 0261/1157] arm64: dts: mt7622: fix BPI-R64 WPS button

[Greg Kroah-Hartman]

From: Nick Hainke <vincent@xxxxxxxxxxxx>

[ Upstream commit c98e6e683632386a3bd284acda4342e68aec4c41 ]

The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
In OpenWrt pushing the WPS button while powering on the device will set
it to recovery mode. Currently, this also happens without any user
interaction. In particular, the wrong signals appear while booting the
device or restarting it, e.g. after doing a system upgrade. If the
device is in recovery mode the user needs to manually power cycle or
restart it.

The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
the device tree. This setting seems to suppress the unwanted WPS button
press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
GPIO_ACTIVE_LOW.

The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt

Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")

Suggested-by: INAGAKI Hiroshi <musashino.open@xxxxxxxxx>
Signed-off-by: Nick Hainke <vincent@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@xxxxxxxxxxxx
Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 2b9bf8dd14ec..7538918c7a82 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -49,7 +49,7 @@ factory {
 		wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-- 
2.35.1