[PATCH V2 6/8] x86/topology: Fix max_siblings calculation

[Zhang Rui]

The max siblings value returned by CPUID.1F SMT level EBX differs among
CPUs on Intel Hybrid platforms like ADL-S/P.
It returns 2 for Pcore CPUs which have HT sibling and 1 for Ecore CPUs
which do not.

Today, CPUID SMT level EBX sets the global variable smp_num_siblings.
Thus, smp_num_siblings is overridden to different values based on the CPU
Pcore/Ecore enumeration order.

For example,

[    0.201005] detect_extended_topology: CPU APICID 0x0, smp_num_siblings 2, x86_max_cores 10
[    0.201117] start_kernel->check_bugs->cpu_smt_check_topology: smp_num_siblings 2
...
[    0.010146] detect_extended_topology: CPU APICID 0x8, smp_num_siblings 2, x86_max_cores 10
...
[    0.010146] detect_extended_topology: CPU APICID 0x39, smp_num_siblings 2, x86_max_cores 10
[    0.010146] detect_extended_topology: CPU APICID 0x48, smp_num_siblings 1, x86_max_cores 20
...
[    0.010146] detect_extended_topology: CPU APICID 0x4e, smp_num_siblings 1, x86_max_cores 20
[    2.583800] sched_set_itmt_core_prio: smp_num_siblings 1

This inconsistency brings several potential issues:
1. some kernel configuration like cpu_smt_control, as set in
   start_kernel()->check_bugs()->cpu_smt_check_topology(), depends on
   smp_num_siblings set by cpu0.
   It is pure luck that all the current hybrid platforms use Pcore as cpu0
   and hide this problem.
2. some per CPU data like cpuinfo_x86.x86_max_cores that depends on
   smp_num_siblings becomes inconsistent and bogus.
3. the final smp_num_siblings value after boot depends on the last CPU
   enumerated, which could either be Pcore or Ecore CPU.

The solution is to use CPUID EAX bits_shift to get the maximum number of
addressable logical processors, and use this to determin max siblings.
Because:
1. the CPUID EAX bits_shift values are consistent among CPUs as far as
   observed.
2. some code already uses smp_num_siblings value to isolate the SMT ID
   bits in APIC-ID, like apic_id_is_primary_thread().

Suggested-and-reviewed-by: Len Brown <len.brown@xxxxxxxxx>
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
---
 arch/x86/kernel/cpu/topology.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/cpu/topology.c b/arch/x86/kernel/cpu/topology.c
index 5e868b62a7c4..2a88f2fa5756 100644
--- a/arch/x86/kernel/cpu/topology.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -23,7 +23,12 @@
 
 #define LEAFB_SUBTYPE(ecx)		(((ecx) >> 8) & 0xff)
 #define BITS_SHIFT_NEXT_LEVEL(eax)	((eax) & 0x1f)
-#define LEVEL_MAX_SIBLINGS(ebx)		((ebx) & 0xffff)
+
+/*
+ * Use EAX bit_shift to calculate the maximum number of addressable logical
+ * processors sharing the current level.
+ */
+#define LEVEL_MAX_SIBLINGS(eax)		(1 << BITS_SHIFT_NEXT_LEVEL(eax))
 
 unsigned int __max_die_per_package __read_mostly = 1;
 EXPORT_SYMBOL(__max_die_per_package);
@@ -79,7 +84,7 @@ int detect_extended_topology_early(struct cpuinfo_x86 *c)
 	 * initial apic id, which also represents 32-bit extended x2apic id.
 	 */
 	c->initial_apicid = edx;
-	smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	smp_num_siblings = LEVEL_MAX_SIBLINGS(eax);
 #endif
 	return 0;
 }
@@ -109,9 +114,9 @@ int detect_extended_topology(struct cpuinfo_x86 *c)
 	 */
 	cpuid_count(leaf, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
 	c->initial_apicid = edx;
-	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(eax);
 	core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
-	die_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+	die_level_siblings = LEVEL_MAX_SIBLINGS(eax);
 	pkg_mask_width = die_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
 
 	sub_index = 1;
@@ -122,14 +127,14 @@ int detect_extended_topology(struct cpuinfo_x86 *c)
 		 * Check for the Core type in the implemented sub leaves.
 		 */
 		if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
-			core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+			core_level_siblings = LEVEL_MAX_SIBLINGS(eax);
 			core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
 			die_level_siblings = core_level_siblings;
 			die_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
 		}
 		if (LEAFB_SUBTYPE(ecx) == DIE_TYPE) {
 			die_level_present = true;
-			die_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+			die_level_siblings = LEVEL_MAX_SIBLINGS(eax);
 			die_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
 		}
 
-- 
2.25.1