Re: [PATCH 1/2] arm64: dts: meson-axg: add support for JetHub D1p (j110)

From: Neil Armstrong
Date: Tue Aug 16 2022 - 07:16:10 EST

On 11/08/2022 12:31, Vyacheslav Bocharov wrote:
- add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home
automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1/2/4GB LPDDR4
- 8/16/32GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac
- TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power
and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Active POE

- unify device tree files for JetHub D1/D1p devices

Signed-off-by: Vyacheslav Bocharov <adeep@xxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-axg-jethome-jethub-j100.dts | 338 +----------------
.../meson-axg-jethome-jethub-j110-rev-2.dts | 37 ++
.../meson-axg-jethome-jethub-j110-rev-3.dts | 27 ++
.../meson-axg-jethome-jethub-j1xx.dtsi | 351 ++++++++++++++++++
5 files changed, 421 insertions(+), 334 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8773211df50e..33e9c96af099 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,6 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 8b0d586aa84e..b2d6ba660914 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -1,270 +1,29 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep@xxxxxxxxx>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak@xxxxxxx>
- * Author: Alexey Shevelkin <ash@xxxxxxx>
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ * Copyright (c) 2022 JetHome
* Author: Vyacheslav Bocharov <adeep@xxxxxxxxx>
*/
/dts-v1/;
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
/ {
compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
- model = "JetHome JetHub J100";
- aliases {
- serial0 = &uart_AO; /* Console */
- serial2 = &uart_AO_B; /* External UART (Wireless Module) */
- ethernet0 = &ethmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
+ model = "JetHome JetHub D1 (J100)";
/* 1024MB RAM */
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
-
- reserved-memory {
- linux,cma {
- size = <0x0 0x400000>;
- };
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_5v>;
- regulator-always-on;
- };
-
- vddio_ao18: regulator-vddio_ao18 {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_AO18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddio_boot: regulator-vddio_boot {
- compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vccq_1v8: regulator-vccq_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCCQ_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- usb_pwr: regulator-usb_pwr {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
- regulator-always-on;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&scpi_sensors 0>;
- trips {
- cpu_passive: cpu-passive {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <100000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cpu_cooling_maps: cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- onewire {
- compatible = "w1-gpio";
- gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
- #gpio-cells = <1>;
- };
-};
-
-&efuse {
- sn: sn@32 {
- reg = <0x32 0x20>;
- };
-
- eth_mac: eth_mac@0 {
- reg = <0x0 0x6>;
- };
-
- bt_mac: bt_mac@6 {
- reg = <0x6 0x6>;
- };
-
- wifi_mac: wifi_mac@c {
- reg = <0xc 0x6>;
- };
-
- bid: bid@12 {
- reg = <0x12 0x20>;
- };
-};
-
-&ethmac {
- status = "okay";
- pinctrl-0 = <&eth_rmii_x_pins>;
- pinctrl-names = "default";
- phy-handle = <&eth_phy0>;
- phy-mode = "rmii";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
- eth_phy0: ethernet-phy@0 {
- /* compatible = "ethernet-phy-id0243.0c54";*/
- max-speed = <100>;
- reg = <0>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <10000>;
- reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-/* Internal I2C bus (on CPU module) */
-&i2c1 {
- status = "okay";
- pinctrl-0 = <&i2c1_z_pins>;
- pinctrl-names = "default";
-
- /* RTC */
- pcf8563: pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- status = "okay";
- };
};
-/* Peripheral I2C bus (on motherboard) */
-&i2c_AO {
- status = "okay";
- pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
- pinctrl-names = "default";
-};
-
-&pwm_ab {
- status = "okay";
- pinctrl-0 = <&pwm_a_x20_pins>;
- pinctrl-names = "default";
-};
/* wifi module */
&sd_emmc_b {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
non-removable;
- disable-wp;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddio_boot>;
brcmf: wifi@1 {
reg = <1>;
@@ -272,99 +31,10 @@ brcmf: wifi@1 {
};
};
-/* emmc storage */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <200000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- mmc-pwrseq = <&emmc_pwrseq>;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vccq_1v8>;
-};
-
/* UART Bluetooth */
&uart_B {
- status = "okay";
- pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
};
};
-
-/* UART Console */
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
-/* UART Wireless module */
-&uart_AO_B {
- status = "okay";
- pinctrl-0 = <&uart_ao_b_pins>;
- pinctrl-names = "default";
-};
-
-&usb {
- status = "okay";
- phy-supply = <&usb_pwr>;
-};
-
-&spicc1 {
- status = "okay";
- pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
- pinctrl-names = "default";
-};
-
-&gpio {
- gpio-line-names =
- "", "", "", "", "", // 0 - 4
- "", "", "", "", "", // 5 - 9
- "UserButton", "", "", "", "", // 10 - 14
- "", "", "", "", "", // 15 - 19
- "", "", "", "", "", // 20 - 24
- "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
- "Output1", "", "", "", "", // 30 - 34
- "", "ZigBeeBOOT", "", "", "", // 35 - 39
- "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
- "Input2", "Input1", "", "", "", // 45 - 49
- "", "", "", "", "", // 50 - 54
- "", "", "", "", "", // 55 - 59
- "", "", "", "", "", // 60 - 64
- "", "", "", "", "", // 65 - 69
- "", "", "", "", "", // 70 - 74
- "", "", "", "", "", // 75 - 79
- "", "", "", "", "", // 80 - 84
- "", ""; // 85-86
-};
-
-&cpu0 {
- #cooling-cells = <2>;
-};
-
-&cpu1 {
- #cooling-cells = <2>;
-};
-
-&cpu2 {
- #cooling-cells = <2>;
-};
-
-&cpu3 {
- #cooling-cells = <2>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
new file mode 100644
index 000000000000..0062667c4f65
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+ compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+ model = "JetHome JetHub D1p (J110) HW rev.2";
+
+ /* 2GiB or 4GiB RAM */
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+ broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
+
+/* UART Bluetooth */
+&uart_B {
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
+ device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
new file mode 100644
index 000000000000..c2d22b00c1cd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+ compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+ model = "JetHome JetHub D1p (J110) Hw rev.3";
+
+ /* 2GiB or 4GiB RAM */
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+ broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
new file mode 100644
index 000000000000..5836b0030931
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@xxxxxxxxx>
+ * Author: Aleksandr Kazantsev <ak@xxxxxxx>
+ * Author: Alexey Shevelkin <ash@xxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO; /* Console */
+ serial2 = &uart_AO_B; /* External UART (Wireless Module) */
+ ethernet0 = &ethmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ linux,cma {
+ size = <0x0 0x400000>;
+ };
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5v>;
+ regulator-always-on;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vccq_1v8: regulator-vccq_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCQ_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ usb_pwr: regulator-usb_pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&scpi_sensors 0>;
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
+ #gpio-cells = <1>;
+ };
+};
+
+&efuse {
+ sn: sn@32 {
+ reg = <0x32 0x20>;
+ };
+
+ eth_mac: eth_mac@0 {
+ reg = <0x0 0x6>;
+ };
+
+ bt_mac: bt_mac@6 {
+ reg = <0x6 0x6>;
+ };
+
+ wifi_mac: wifi_mac@c {
+ reg = <0xc 0x6>;
+ };
+
+ bid: bid@12 {
+ reg = <0x12 0x20>;
+ };
+};
+
+&ethmac {
+ status = "okay";
+ pinctrl-0 = <&eth_rmii_x_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&eth_phy0>;
+ phy-mode = "rmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
+ eth_phy0: ethernet-phy@0 {
+ /* compatible = "ethernet-phy-id0243.0c54";*/
+ max-speed = <100>;
+ reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/* Internal I2C bus (on CPU module) */
+&i2c1 {
+ status = "okay";
+ pinctrl-0 = <&i2c1_z_pins>;
+ pinctrl-names = "default";
+
+ /* RTC */
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ status = "okay";
+ };
+};
+
+/* Peripheral I2C bus (on motherboard) */
+&i2c_AO {
+ status = "okay";
+ pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_a_x20_pins>;
+ pinctrl-names = "default";
+};
+
+/* wifi module */
+&sd_emmc_b {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* emmc storage */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vccq_1v8>;
+};
+
+/* UART Bluetooth */
+&uart_B {
+ status = "okay";
+ pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+/* UART Console */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/* UART Wireless module */
+&uart_AO_B {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_b_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ phy-supply = <&usb_pwr>;
+};
+
+&spicc1 {
+ status = "okay";
+ pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
+ pinctrl-names = "default";
+};
+
+&gpio {
+ gpio-line-names =
+ "", "", "", "", "", // 0 - 4
+ "", "", "", "", "", // 5 - 9
+ "UserButton", "", "", "", "", // 10 - 14
+ "", "", "", "", "", // 15 - 19
+ "", "", "", "", "", // 20 - 24
+ "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
+ "Output1", "", "", "", "", // 30 - 34
+ "", "ZigBeeBOOT", "", "", "", // 35 - 39
+ "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
+ "Input2", "Input1", "", "", "", // 45 - 49
+ "", "", "", "", "", // 50 - 54
+ "", "", "", "", "", // 55 - 59
+ "", "", "", "", "", // 60 - 64
+ "", "", "", "", "", // 65 - 69
+ "", "", "", "", "", // 70 - 74
+ "", "", "", "", "", // 75 - 79
+ "", "", "", "", "", // 80 - 84
+ "", ""; // 85-86
+};
+
+&cpu0 {
+ #cooling-cells = <2>;
+};
+
+&cpu1 {
+ #cooling-cells = <2>;
+};
+
+&cpu2 {
+ #cooling-cells = <2>;
+};
+
+&cpu3 {
+ #cooling-cells = <2>;
+};

Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>