[RFT PATCH v2 02/14] arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex

[Krzysztof Kozlowski]

The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device.  This also describes more accurately the devices
and their IO address space.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 742eac4ce9b3..3411ced96db6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -359,7 +359,7 @@ opp-2150400000 {
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8996", "qcom,scm";
-			qcom,dload-mode = <&tcsr 0x13000>;
+			qcom,dload-mode = <&tcsr_2 0x13000>;
 		};
 	};
 
@@ -840,10 +840,15 @@ pnoc: interconnect@5c0000 {
 
 		tcsr_mutex_regs: syscon@740000 {
 			compatible = "syscon";
-			reg = <0x00740000 0x40000>;
+			reg = <0x00740000 0x20000>;
 		};
 
-		tcsr: syscon@7a0000 {
+		tcsr_1: sycon@760000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x00760000 0x20000>;
+		};
+
+		tcsr_2: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
 			reg = <0x007a0000 0x18000>;
 		};
@@ -2413,7 +2418,7 @@ mss_pil: remoteproc@2080000 {
 			qcom,smem-states = <&mpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
 
 			status = "disabled";
 
-- 
2.34.1