[PATCH v2] PCI/PM: Switch D3Hot delay to also use usleep_range

[Will McVicker]

From: Sajid Dalvi <sdalvi@xxxxxxxxxx>

Since the PCI spec requires a 10ms D3Hot delay (defined by
PCI_PM_D3HOT_WAIT) and a few of the PCI quirks update the D3Hot delay up
to 120ms, let's add support for both usleep_range and msleep based on
the delay time to improve the delay accuracy.

This patch is based off of a commit from Sajid Dalvi <sdalvi@xxxxxxxxxx>
in the Pixel 6 kernel tree [1]. Testing on a Pixel 6, found that the
10ms delay for the Exynos PCIe device was on average delaying for 19ms
when the spec requires 10ms. Switching from msleep to uslseep_range
therefore decreases the resume time on a Pixel 6 on average by 9ms.

[1] https://android.googlesource.com/kernel/gs/+/18a8cad68d8e6d50f339a716a18295e6d987cee3

Signed-off-by: Sajid Dalvi <sdalvi@xxxxxxxxxx>
Signed-off-by: Will McVicker <willmcvicker@xxxxxxxxxx>
---
 drivers/pci/pci.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 95bc329e74c0..97a042ca9032 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -63,16 +63,26 @@ struct pci_pme_device {
 };
 
 #define PME_TIMEOUT 1000 /* How long between PME checks */
+#define MAX(a, b) ((a) >= (b) ? (a) : (b))
 
 static void pci_dev_d3_sleep(struct pci_dev *dev)
 {
-	unsigned int delay = dev->d3hot_delay;
+	unsigned int delay_ms = dev->d3hot_delay;
 
-	if (delay < pci_pm_d3hot_delay)
-		delay = pci_pm_d3hot_delay;
+	if (delay_ms < pci_pm_d3hot_delay)
+		delay_ms = pci_pm_d3hot_delay;
 
-	if (delay)
-		msleep(delay);
+	if (delay_ms) {
+		if (delay_ms <= 20) {
+			/* Use a 20-25% upper bound with 1ms minimum */
+			unsigned int upper = MAX((delay_ms >> 3) << 1, 1);
+
+			usleep_range(delay_ms * USEC_PER_MSEC,
+				     (delay_ms + upper) * USEC_PER_MSEC);
+		} else {
+			msleep(delay_ms);
+		}
+	}
 }
 
 bool pci_reset_supported(struct pci_dev *dev)

base-commit: 274a2eebf80c60246f9edd6ef8e9a095ad121264
-- 
2.37.1.595.g718a3a8f04-goog