Re: [RFT PATCH v2 04/14] arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex

[Konrad Dybcio]

On 17.08.2022 15:03, Krzysztof Kozlowski wrote:
> The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
> mutex into device with address space, we need to split the halt regs to
> its own syscon device.  This also describes more accurately the devices
> and their IO address space.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Not tested on a device, but looks good to the eye:
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/msm8998.dtsi | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index 02d21bff2198..f0806ed103f1 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -1049,7 +1049,12 @@ ufsphy_lanes: phy@1da7400 {
>  
>  		tcsr_mutex_regs: syscon@1f40000 {
>  			compatible = "syscon";
> -			reg = <0x01f40000 0x40000>;
> +			reg = <0x01f40000 0x20000>;
> +		};
> +
> +		tcsr_regs_1: sycon@1f60000 {
> +			compatible = "qcom,msm8998-tcsr", "syscon";
> +			reg = <0x01f60000 0x20000>;
>  		};
>  
>  		tlmm: pinctrl@3400000 {
> @@ -1340,7 +1345,7 @@ remoteproc_mss: remoteproc@4080000 {
>  			resets = <&gcc GCC_MSS_RESTART>;
>  			reset-names = "mss_restart";
>  
> -			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> +			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
>  
>  			power-domains = <&rpmpd MSM8998_VDDCX>,
>  					<&rpmpd MSM8998_VDDMX>;