Re: [RFT PATCH v2 08/14] arm64: dts: qcom: sc7180: switch TCSR mutex to MMIO

[Konrad Dybcio]

On 17.08.2022 15:03, Krzysztof Kozlowski wrote:
> The TCSR mutex bindings allow device to be described only with address
> space (so it uses MMIO, not syscon regmap).  This seems reasonable as
> TCSR mutex is actually a dedicated IO address space and it also fixes DT
> schema checks:
> 
>   qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'reg' is a required property
>   qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Not tested on a device, but looks good to the eye:
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 11 +++--------
>  1 file changed, 3 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 5d2dd21da79c..e8debb0da411 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -555,12 +555,6 @@ scm {
>  		};
>  	};
>  
> -	tcsr_mutex: hwlock {
> -		compatible = "qcom,tcsr-mutex";
> -		syscon = <&tcsr_mutex_regs 0 0x1000>;
> -		#hwlock-cells = <1>;
> -	};
> -
>  	smem {
>  		compatible = "qcom,smem";
>  		memory-region = <&smem_mem>;
> @@ -1462,9 +1456,10 @@ ipa: ipa@1e40000 {
>  			status = "disabled";
>  		};
>  
> -		tcsr_mutex_regs: syscon@1f40000 {
> -			compatible = "syscon";
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
>  			reg = <0 0x01f40000 0 0x20000>;
> +			#hwlock-cells = <1>;
>  		};
>  
>  		tcsr_regs_1: sycon@1f60000 {