[PATCH] MIPS: loongson32: Fix the validation failure of LS1B & LS1C Ethernet PHY

[Keguang Zhang]

From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>

The Ethernet of LS1B/LS1C doesn't work due to the stmmac driver
using phylink_generic_validate() instead of stmmac_validate().
Moreover the driver assumes the PHY interface mode
passed in platform data is always supported.

stmmaceth stmmaceth.0 eth0: validation of gmii with support 00000000,00000000,000062cf and advertisement 00000000,00000000,000062cf failed: -EINVAL
stmmaceth stmmaceth.0 eth0: stmmac_open: Cannot attach to PHY (error: -22)

This patch sets phy_interface field of platform data.

Fixes: 04a0683f7db4 ("net: stmmac: convert to phylink_generic_validate()")
Fixes: d194923d51c9 ("net: stmmac: fill in supported_interfaces")
Signed-off-by: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
---
 arch/mips/loongson32/common/platform.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 794c96c2a4cd..741aace80b80 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -147,8 +147,10 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = {
 	.phy_addr		= -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
 	.interface		= PHY_INTERFACE_MODE_MII,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
 	.interface		= PHY_INTERFACE_MODE_RMII,
+	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 #endif
 	.mdio_bus_data		= &ls1x_mdio_bus_data,
 	.dma_cfg		= &ls1x_eth_dma_cfg,

base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868
-- 
2.34.1