Re: [RFC PATCH 3/4] ARM: dts: stm32: add pin map for CAN controller on stm32f4
From: Krzysztof Kozlowski
Date: Thu Aug 18 2022 - 04:23:05 EST
On 17/08/2022 17:35, Dario Binacchi wrote:
> Add pin configurations for using CAN controller on stm32f469-disco
> board. They are located on the Arduino compatible connector CN5 (CAN1)
> and on the extension connector CN12 (CAN2).
>
> +
> + can2_pins_b: can2-1 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
> +
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
> + bias-pull-up;
> + };
> + };
> +
No need for blank line.
Best regards,
Krzysztof