[PATCH 1/4] media: mt9m111: add V4L2_CID_PIXEL_RATE support

[Marco Felsch]

Add support to report the PIXEL_RATE so a host or bridge device can ask
the sensor.

Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
 drivers/media/i2c/mt9m111.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index afc86efa9e3e..cdaf283e1309 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -908,6 +908,8 @@ static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl)
 		return mt9m111_set_test_pattern(mt9m111, ctrl->val);
 	case V4L2_CID_COLORFX:
 		return mt9m111_set_colorfx(mt9m111, ctrl->val);
+	case V4L2_CID_PIXEL_RATE:
+		return 0;
 	}
 
 	return -EINVAL;
@@ -1249,6 +1251,7 @@ static int mt9m111_probe(struct i2c_client *client)
 {
 	struct mt9m111 *mt9m111;
 	struct i2c_adapter *adapter = client->adapter;
+	unsigned long mclk_rate;
 	int ret;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
@@ -1271,6 +1274,13 @@ static int mt9m111_probe(struct i2c_client *client)
 	if (IS_ERR(mt9m111->clk))
 		return PTR_ERR(mt9m111->clk);
 
+	ret = clk_prepare_enable(mt9m111->clk);
+	if (ret < 0)
+		return ret;
+
+	mclk_rate = clk_get_rate(mt9m111->clk);
+	clk_disable_unprepare(mt9m111->clk);
+
 	mt9m111->regulator = devm_regulator_get(&client->dev, "vdd");
 	if (IS_ERR(mt9m111->regulator)) {
 		dev_err(&client->dev, "regulator not found: %ld\n",
@@ -1285,7 +1295,7 @@ static int mt9m111_probe(struct i2c_client *client)
 	mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
 				 V4L2_SUBDEV_FL_HAS_EVENTS;
 
-	v4l2_ctrl_handler_init(&mt9m111->hdl, 7);
+	v4l2_ctrl_handler_init(&mt9m111->hdl, 8);
 	v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
 			V4L2_CID_VFLIP, 0, 1, 1, 0);
 	v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
@@ -1309,6 +1319,9 @@ static int mt9m111_probe(struct i2c_client *client)
 				BIT(V4L2_COLORFX_NEGATIVE) |
 				BIT(V4L2_COLORFX_SOLARIZATION)),
 			V4L2_COLORFX_NONE);
+	v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, V4L2_CID_PIXEL_RATE,
+			  mclk_rate, mclk_rate, 1, mclk_rate);
+
 	mt9m111->subdev.ctrl_handler = &mt9m111->hdl;
 	if (mt9m111->hdl.error) {
 		ret = mt9m111->hdl.error;
-- 
2.30.2