Re: [PATCH V2] LoongArch: Add efistub booting support

From: Ard Biesheuvel
Date: Thu Aug 18 2022 - 13:13:35 EST

Next message: Joel Fernandes: "Re: [PATCH v14 4/4] Documentation: trace/objtrace: Add documentation for objtrace"
Previous message: Darrick J. Wong: "Re: [RFC PATCH v6] mm, pmem, xfs: Introduce MF_MEM_REMOVE for unbind"
In reply to: Huacai Chen: "Re: [PATCH V2] LoongArch: Add efistub booting support"
Next in thread: Huacai Chen: "Re: [PATCH V2] LoongArch: Add efistub booting support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, 18 Aug 2022 at 05:07, Huacai Chen <chenhuacai@xxxxxxxxxxx> wrote:
>
> This patch adds efistub booting support, which is the standard UEFI boot
> protocol for us to use.
>
> We use generic efistub, which means we can pass boot information (i.e.,
> system table, memory map, kernel command line, initrd) via a light FDT
> and drop a lot of non-standard code.
>
> We use a flat mapping to map the efi runtime in the kernel's address
> space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
> flat mapping is not identity mapping, SetVirtualAddressMap() is still
> needed for the efi runtime.
>
> Tested-by: Xi Ruoyao <xry111@xxxxxxxxxxx>
> Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
> ---
> V1 --> V2:
> 1, Call SetVirtualAddressMap() in stub;
> 2, Use core kernel data directly in alloc_screen_info();
> 3, Remove the magic number in MS-DOS header;
> 4, Disable EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER;
> 5, Some other small changes suggested by Ard Biesheuvel.
>
> arch/loongarch/Kconfig | 9 ++
> arch/loongarch/Makefile | 7 +-
> arch/loongarch/boot/Makefile | 8 +-
> arch/loongarch/include/asm/efi.h | 10 +-
> arch/loongarch/kernel/efi-header.S | 99 +++++++++++++++++++
> arch/loongarch/kernel/efi.c | 3 +
> arch/loongarch/kernel/head.S | 20 ++++
> arch/loongarch/kernel/image-vars.h | 30 ++++++
> arch/loongarch/kernel/setup.c | 12 +--
> arch/loongarch/kernel/vmlinux.lds.S | 1 +
> drivers/firmware/efi/Kconfig | 4 +-
> drivers/firmware/efi/libstub/Makefile | 10 ++
> drivers/firmware/efi/libstub/efi-stub.c | 31 ++++--
> drivers/firmware/efi/libstub/loongarch-stub.c | 60 +++++++++++
> include/linux/pe.h | 2 +
> 15 files changed, 282 insertions(+), 24 deletions(-)
> create mode 100644 arch/loongarch/kernel/efi-header.S
> create mode 100644 arch/loongarch/kernel/image-vars.h
> create mode 100644 drivers/firmware/efi/libstub/loongarch-stub.c
>
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 9478f9646fa5..4cb412a82afa 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -324,6 +324,15 @@ config EFI
> This enables the kernel to use EFI runtime services that are
> available (such as the EFI variable services).
>
> +config EFI_STUB
> + bool "EFI boot stub support"
> + default y
> + depends on EFI
> + select EFI_GENERIC_STUB
> + help
> + This kernel feature allows the kernel to be loaded directly by
> + EFI firmware without the use of a bootloader.
> +
> config SMP
> bool "Multi-Processing support"
> help
> diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> index ec3de6191276..2bd0a574ed73 100644
> --- a/arch/loongarch/Makefile
> +++ b/arch/loongarch/Makefile
> @@ -7,7 +7,11 @@ boot := arch/loongarch/boot
>
> KBUILD_DEFCONFIG := loongson3_defconfig
>
> -KBUILD_IMAGE = $(boot)/vmlinux
> +ifndef CONFIG_EFI_STUB
> +KBUILD_IMAGE = $(boot)/vmlinux.elf
> +else
> +KBUILD_IMAGE = $(boot)/vmlinux.efi
> +endif
>

Nit: I am not 100% whether it matters or not, but all other
architectures use := for these assignments.

Also, in order to be able to use vmlinux.elf or vmlinux.efi as a make
target directly, other architectures seem to use something like

all: $(notdir $(KBUILD_IMAGE))

vmlinux.elf vmlinux.efi: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@

Adopting this will make it easier to wire up the generic zboot support too.

> #
> # Select the object file format to substitute into the linker script.
> @@ -75,6 +79,7 @@ endif
> head-y := arch/loongarch/kernel/head.o
>
> libs-y += arch/loongarch/lib/
> +libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
>
> ifeq ($(KBUILD_EXTMOD),)
> prepare: vdso_prepare
> diff --git a/arch/loongarch/boot/Makefile b/arch/loongarch/boot/Makefile
> index 0125b17edc98..fecf34f50e56 100644
> --- a/arch/loongarch/boot/Makefile
> +++ b/arch/loongarch/boot/Makefile
> @@ -8,9 +8,13 @@ drop-sections := .comment .note .options .note.gnu.build-id
> strip-flags := $(addprefix --remove-section=,$(drop-sections)) -S
> OBJCOPYFLAGS_vmlinux.efi := -O binary $(strip-flags)
>
> -targets := vmlinux
> quiet_cmd_strip = STRIP $@
> cmd_strip = $(STRIP) -s -o $@ $<
>
> -$(obj)/vmlinux: vmlinux FORCE
> +targets := vmlinux.elf
> +$(obj)/vmlinux.elf: vmlinux FORCE
> $(call if_changed,strip)
> +
> +targets += vmlinux.efi
> +$(obj)/vmlinux.efi: vmlinux FORCE
> + $(call if_changed,objcopy)
> diff --git a/arch/loongarch/include/asm/efi.h b/arch/loongarch/include/asm/efi.h
> index 9d44c6948be1..c7507a240f30 100644
> --- a/arch/loongarch/include/asm/efi.h
> +++ b/arch/loongarch/include/asm/efi.h
> @@ -18,8 +18,14 @@ void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
>
> #define EFI_ALLOC_ALIGN SZ_64K
>
> -struct screen_info *alloc_screen_info(void);
> -void free_screen_info(struct screen_info *si);
> +static inline struct screen_info *alloc_screen_info(void)
> +{
> + return &screen_info;
> +}
> +
> +static inline void free_screen_info(struct screen_info *si)
> +{
> +}
>
> static inline unsigned long efi_get_max_initrd_addr(unsigned long image_addr)
> {
> diff --git a/arch/loongarch/kernel/efi-header.S b/arch/loongarch/kernel/efi-header.S
> new file mode 100644
> index 000000000000..8c1d229a2afa
> --- /dev/null
> +++ b/arch/loongarch/kernel/efi-header.S
> @@ -0,0 +1,99 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
> + */
> +
> +#include <linux/pe.h>
> +#include <linux/sizes.h>
> +
> + .macro __EFI_PE_HEADER
> + .long PE_MAGIC
> +.Lcoff_header:
> + .short IMAGE_FILE_MACHINE_LOONGARCH64 /* Machine */
> + .short .Lsection_count /* NumberOfSections */
> + .long 0 /* TimeDateStamp */
> + .long 0 /* PointerToSymbolTable */
> + .long 0 /* NumberOfSymbols */
> + .short .Lsection_table - .Loptional_header /* SizeOfOptionalHeader */
> + .short IMAGE_FILE_DEBUG_STRIPPED | \
> + IMAGE_FILE_EXECUTABLE_IMAGE | \
> + IMAGE_FILE_LINE_NUMS_STRIPPED /* Characteristics */
> +
> +.Loptional_header:
> + .short PE_OPT_MAGIC_PE32PLUS /* PE32+ format */
> + .byte 0x02 /* MajorLinkerVersion */
> + .byte 0x14 /* MinorLinkerVersion */
> + .long __inittext_end - .Lefi_header_end /* SizeOfCode */
> + .long _end - __initdata_begin /* SizeOfInitializedData */
> + .long 0 /* SizeOfUninitializedData */
> + .long __efistub_efi_pe_entry - _head /* AddressOfEntryPoint */
> + .long .Lefi_header_end - _head /* BaseOfCode */
> +
> +.Lextra_header_fields:
> + .quad 0 /* ImageBase */
> + .long PECOFF_SEGMENT_ALIGN /* SectionAlignment */
> + .long PECOFF_FILE_ALIGN /* FileAlignment */
> + .short 0 /* MajorOperatingSystemVersion */
> + .short 0 /* MinorOperatingSystemVersion */
> + .short LINUX_EFISTUB_MAJOR_VERSION /* MajorImageVersion */
> + .short LINUX_EFISTUB_MINOR_VERSION /* MinorImageVersion */
> + .short 0 /* MajorSubsystemVersion */
> + .short 0 /* MinorSubsystemVersion */
> + .long 0 /* Win32VersionValue */
> +
> + .long _end - _head /* SizeOfImage */
> +
> + /* Everything before the kernel image is considered part of the header */
> + .long .Lefi_header_end - _head /* SizeOfHeaders */
> + .long 0 /* CheckSum */
> + .short IMAGE_SUBSYSTEM_EFI_APPLICATION /* Subsystem */
> + .short 0 /* DllCharacteristics */
> + .quad 0 /* SizeOfStackReserve */
> + .quad 0 /* SizeOfStackCommit */
> + .quad 0 /* SizeOfHeapReserve */
> + .quad 0 /* SizeOfHeapCommit */
> + .long 0 /* LoaderFlags */
> + .long (.Lsection_table - .) / 8 /* NumberOfRvaAndSizes */
> +
> + .quad 0 /* ExportTable */
> + .quad 0 /* ImportTable */
> + .quad 0 /* ResourceTable */
> + .quad 0 /* ExceptionTable */
> + .quad 0 /* CertificationTable */
> + .quad 0 /* BaseRelocationTable */
> +
> + /* Section table */
> +.Lsection_table:
> + .ascii ".text\0\0\0"
> + .long __inittext_end - .Lefi_header_end /* VirtualSize */
> + .long .Lefi_header_end - _head /* VirtualAddress */
> + .long __inittext_end - .Lefi_header_end /* SizeOfRawData */
> + .long .Lefi_header_end - _head /* PointerToRawData */
> +
> + .long 0 /* PointerToRelocations */
> + .long 0 /* PointerToLineNumbers */
> + .short 0 /* NumberOfRelocations */
> + .short 0 /* NumberOfLineNumbers */
> + .long IMAGE_SCN_CNT_CODE | \
> + IMAGE_SCN_MEM_READ | \
> + IMAGE_SCN_MEM_EXECUTE /* Characteristics */
> +
> + .ascii ".data\0\0\0"
> + .long _end - __initdata_begin /* VirtualSize */
> + .long __initdata_begin - _head /* VirtualAddress */
> + .long _edata - __initdata_begin /* SizeOfRawData */
> + .long __initdata_begin - _head /* PointerToRawData */
> +
> + .long 0 /* PointerToRelocations */
> + .long 0 /* PointerToLineNumbers */
> + .short 0 /* NumberOfRelocations */
> + .short 0 /* NumberOfLineNumbers */
> + .long IMAGE_SCN_CNT_INITIALIZED_DATA | \
> + IMAGE_SCN_MEM_READ | \
> + IMAGE_SCN_MEM_WRITE /* Characteristics */
> +
> + .set .Lsection_count, (. - .Lsection_table) / 40
> +
> + .balign 0x10000 /* PECOFF_SEGMENT_ALIGN */
> +.Lefi_header_end:
> + .endm
> diff --git a/arch/loongarch/kernel/efi.c b/arch/loongarch/kernel/efi.c
> index a50b60c587fa..1f1f755fb425 100644
> --- a/arch/loongarch/kernel/efi.c
> +++ b/arch/loongarch/kernel/efi.c
> @@ -69,4 +69,7 @@ void __init efi_init(void)
> config_tables = early_memremap(efi_config_table, efi_nr_tables * size);
> efi_config_parse_tables(config_tables, efi_systab->nr_tables, arch_tables);
> early_memunmap(config_tables, efi_nr_tables * size);
> +
> + if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI)
> + memblock_reserve(screen_info.lfb_base, screen_info.lfb_size);
> }
> diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S
> index c60eb66793e3..01bac62a6442 100644
> --- a/arch/loongarch/kernel/head.S
> +++ b/arch/loongarch/kernel/head.S
> @@ -12,6 +12,26 @@
> #include <asm/loongarch.h>
> #include <asm/stackframe.h>
>
> +#ifdef CONFIG_EFI_STUB
> +
> +#include "efi-header.S"
> +
> + __HEAD
> +
> +_head:
> + .word MZ_MAGIC /* "MZ", MS-DOS header */
> + .org 0x3c /* 0x04 ~ 0x3b reserved */
> + .long pe_header - _head /* Offset to the PE header */
> +
> +pe_header:
> + __EFI_PE_HEADER
> +
> +SYM_DATA(kernel_asize, .long _end - _text);
> +SYM_DATA(kernel_fsize, .long _edata - _text);
> +SYM_DATA(kernel_offset, .long kernel_offset - _text);
> +

These are a bit nasty: could you perhaps add a comment that explains
why exactly we need to emit these values like this? Using
kernel_offset with an offset to itself just to be able to refer to
_text from loongarch-stub.c is especially horrid, so bonus points if
you can find a better way to do that, preferably without asm
variables.

> +#endif
> +
> __REF
>
> SYM_CODE_START(kernel_entry) # kernel entry point
> diff --git a/arch/loongarch/kernel/image-vars.h b/arch/loongarch/kernel/image-vars.h
> new file mode 100644
> index 000000000000..c901ebb903f2
> --- /dev/null
> +++ b/arch/loongarch/kernel/image-vars.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
> + */
> +#ifndef __LOONGARCH_KERNEL_IMAGE_VARS_H
> +#define __LOONGARCH_KERNEL_IMAGE_VARS_H
> +
> +#ifdef CONFIG_EFI_STUB
> +
> +__efistub_memcmp = memcmp;
> +__efistub_memchr = memchr;
> +__efistub_memcpy = memcpy;
> +__efistub_memmove = memmove;
> +__efistub_memset = memset;
> +__efistub_strcat = strcat;
> +__efistub_strcmp = strcmp;
> +__efistub_strlen = strlen;
> +__efistub_strncat = strncat;
> +__efistub_strnstr = strnstr;
> +__efistub_strnlen = strnlen;
> +__efistub_strrchr = strrchr;
> +__efistub_kernel_entry = kernel_entry;
> +__efistub_kernel_asize = kernel_asize;
> +__efistub_kernel_fsize = kernel_fsize;
> +__efistub_kernel_offset = kernel_offset;
> +__efistub_screen_info = screen_info;
> +
> +#endif
> +
> +#endif /* __LOONGARCH_KERNEL_IMAGE_VARS_H */
> diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
> index 23ee293e1cd2..f938aae3e92c 100644
> --- a/arch/loongarch/kernel/setup.c
> +++ b/arch/loongarch/kernel/setup.c
> @@ -49,9 +49,7 @@
> #define SMBIOS_CORE_PACKAGE_OFFSET 0x23
> #define LOONGSON_EFI_ENABLE (1 << 3)
>
> -#ifdef CONFIG_VT
> -struct screen_info screen_info;
> -#endif
> +struct screen_info screen_info __section(".data");
>
> unsigned long fw_arg0, fw_arg1;
> DEFINE_PER_CPU(unsigned long, kernelsp);
> @@ -122,16 +120,9 @@ static void __init parse_cpu_table(const struct dmi_header *dm)
>
> static void __init parse_bios_table(const struct dmi_header *dm)
> {
> - int bios_extern;
> char *dmi_data = (char *)dm;
>
> - bios_extern = *(dmi_data + SMBIOS_BIOSEXTERN_OFFSET);
> b_info.bios_size = (*(dmi_data + SMBIOS_BIOSSIZE_OFFSET) + 1) << 6;
> -
> - if (bios_extern & LOONGSON_EFI_ENABLE)
> - set_bit(EFI_BOOT, &efi.flags);
> - else
> - clear_bit(EFI_BOOT, &efi.flags);
> }
>

Why is this taken from the SMBIOS data?

> static void __init find_tokens(const struct dmi_header *dm, void *dummy)
> @@ -145,6 +136,7 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy)
> break;
> }
> }
> +
> static void __init smbios_parse(void)
> {
> b_info.bios_vendor = (void *)dmi_get_system_info(DMI_BIOS_VENDOR);
> diff --git a/arch/loongarch/kernel/vmlinux.lds.S b/arch/loongarch/kernel/vmlinux.lds.S
> index 69c76f26c1c5..36d042739f3c 100644
> --- a/arch/loongarch/kernel/vmlinux.lds.S
> +++ b/arch/loongarch/kernel/vmlinux.lds.S
> @@ -12,6 +12,7 @@
> #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
>
> #include <asm-generic/vmlinux.lds.h>
> +#include "image-vars.h"
>
> /*
> * Max avaliable Page Size is 64K, so we set SectionAlignment
> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
> index 6cb7384ad2ac..cbf1c55dc224 100644
> --- a/drivers/firmware/efi/Kconfig
> +++ b/drivers/firmware/efi/Kconfig
> @@ -107,7 +107,7 @@ config EFI_GENERIC_STUB
>
> config EFI_ARMSTUB_DTB_LOADER
> bool "Enable the DTB loader"
> - depends on EFI_GENERIC_STUB && !RISCV
> + depends on EFI_GENERIC_STUB && !RISCV && !LOONGARCH
> default y
> help
> Select this config option to add support for the dtb= command
> @@ -124,7 +124,7 @@ config EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER
> bool "Enable the command line initrd loader" if !X86
> depends on EFI_STUB && (EFI_GENERIC_STUB || X86)
> default y if X86
> - depends on !RISCV
> + depends on !RISCV && !LOONGARCH
> help
> Select this config option to add support for the initrd= command
> line parameter, allowing an initrd that resides on the same volume
> diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
> index d0537573501e..1588c61939e7 100644
> --- a/drivers/firmware/efi/libstub/Makefile
> +++ b/drivers/firmware/efi/libstub/Makefile
> @@ -26,6 +26,8 @@ cflags-$(CONFIG_ARM) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> $(call cc-option,-mno-single-pic-base)
> cflags-$(CONFIG_RISCV) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> -fpic
> +cflags-$(CONFIG_LOONGARCH) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> + -fpic
>
> cflags-$(CONFIG_EFI_GENERIC_STUB) += -I$(srctree)/scripts/dtc/libfdt
>
> @@ -70,6 +72,8 @@ lib-$(CONFIG_ARM) += arm32-stub.o
> lib-$(CONFIG_ARM64) += arm64-stub.o
> lib-$(CONFIG_X86) += x86-stub.o
> lib-$(CONFIG_RISCV) += riscv-stub.o
> +lib-$(CONFIG_LOONGARCH) += loongarch-stub.o
> +
> CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
>
> # Even when -mbranch-protection=none is set, Clang will generate a
> @@ -125,6 +129,12 @@ STUBCOPY_FLAGS-$(CONFIG_RISCV) += --prefix-alloc-sections=.init \
> --prefix-symbols=__efistub_
> STUBCOPY_RELOC-$(CONFIG_RISCV) := R_RISCV_HI20
>
> +# For LoongArch, keep all the symbols in .init section and make sure that no
> +# absolute symbols references doesn't exist.
> +STUBCOPY_FLAGS-$(CONFIG_LOONGARCH) += --prefix-alloc-sections=.init \
> + --prefix-symbols=__efistub_
> +STUBCOPY_RELOC-$(CONFIG_LOONGARCH) := R_LARCH_MARK_LA
> +
> $(obj)/%.stub.o: $(obj)/%.o FORCE
> $(call if_changed,stubcopy)
>
> diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
> index f515394cce6e..efb9219d8d49 100644
> --- a/drivers/firmware/efi/libstub/efi-stub.c
> +++ b/drivers/firmware/efi/libstub/efi-stub.c
> @@ -40,14 +40,19 @@
>
> #ifdef CONFIG_ARM64
> # define EFI_RT_VIRTUAL_LIMIT DEFAULT_MAP_WINDOW_64
> -#elif defined(CONFIG_RISCV)
> +#elif defined(CONFIG_RISCV) || defined(CONFIG_LOONGARCH)
> # define EFI_RT_VIRTUAL_LIMIT TASK_SIZE_MIN
> -#else
> +#else /* Only if TASK_SIZE is a constant */
> # define EFI_RT_VIRTUAL_LIMIT TASK_SIZE
> #endif
>
> +/*
> + * 0: No flat mapping
> + * 1: Flat mapping that VA = PA
> + * 2: Flat mapping that VA = PA + PAGE_OFFSET
> + */
> +static int flat_va_mapping;
> static u64 virtmap_base = EFI_RT_VIRTUAL_BASE;
> -static bool flat_va_mapping;
>

Can we change this around a bit?

static bool flat_va_mapping = __is_defined(EFI_RT_FIXED_VIRTUAL_OFFSET);

#ifndef EFI_RT_FIXED_VIRTUAL_OFFSET
#define EFI_RT_FIXED_VIRTUAL_OFFSET 0
#endif

Then, in your arch's asm/efi.h, you can add

#define EFI_RT_FIXED_VIRTUAL_OFFSET PAGE_OFFSET

...
> @@ -254,9 +260,11 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
> * The easiest way to achieve that is to simply use a 1:1 mapping.
> */
> prop_tbl = get_efi_config_table(EFI_PROPERTIES_TABLE_GUID);
> - flat_va_mapping = prop_tbl &&
> - (prop_tbl->memory_protection_attribute &
> - EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA);
> + attrib = prop_tbl ? prop_tbl->memory_protection_attribute : 0;
> + if (attrib & EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA)
> + flat_va_mapping = 1;
> + if (IS_ENABLED(CONFIG_LOONGARCH))
> + flat_va_mapping = 2;
>

Keep the original code but change it into

flat_va_mapping |= ....

(and drop the rest of the change)

> /* force efi_novamap if SetVirtualAddressMap() is unsupported */
> efi_novamap |= !(get_supported_rt_services() &
> @@ -338,7 +346,16 @@ void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
> paddr = in->phys_addr;
> size = in->num_pages * EFI_PAGE_SIZE;
>
> - in->virt_addr = in->phys_addr;

Change this into

in->virt_addr = in->phys_addr + EFI_RT_FIXED_VIRTUAL_OFFSET;

> + switch (flat_va_mapping) {
> + case 1:
> + in->virt_addr = in->phys_addr;
> + break;
> + case 2:
> + in->virt_addr = in->phys_addr + PAGE_OFFSET;
> + break;
> + default:
> + in->virt_addr = in->phys_addr;
> + }

And drop the switch

> if (efi_novamap) {
> continue;
> }
> diff --git a/drivers/firmware/efi/libstub/loongarch-stub.c b/drivers/firmware/efi/libstub/loongarch-stub.c
> new file mode 100644
> index 000000000000..b7ef8d2df59e
> --- /dev/null
> +++ b/drivers/firmware/efi/libstub/loongarch-stub.c
> @@ -0,0 +1,60 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Author: Yun Liu <liuyun@xxxxxxxxxxx>
> + * Huacai Chen <chenhuacai@xxxxxxxxxxx>
> + * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
> + */
> +
> +#include <asm/efi.h>
> +#include <asm/addrspace.h>
> +#include "efistub.h"
> +
> +typedef void __noreturn (*kernel_entry_t)(bool efi, unsigned long fdt);
> +
> +extern int kernel_asize;
> +extern int kernel_fsize;
> +extern int kernel_offset;
> +extern kernel_entry_t kernel_entry;
> +
> +efi_status_t check_platform_features(void)
> +{
> + return EFI_SUCCESS;
> +}
> +
> +efi_status_t handle_kernel_image(unsigned long *image_addr,
> + unsigned long *image_size,
> + unsigned long *reserve_addr,
> + unsigned long *reserve_size,
> + efi_loaded_image_t *image,
> + efi_handle_t image_handle)
> +{
> + efi_status_t status;
> + unsigned long kernel_addr = 0;
> +
> + kernel_addr = (unsigned long)&kernel_offset - kernel_offset;
> +
> + status = efi_relocate_kernel(&kernel_addr, kernel_fsize, kernel_asize,
> + PHYSADDR(VMLINUX_LOAD_ADDRESS), SZ_2M, 0x0);
> +
> + *image_addr = kernel_addr;
> + *image_size = kernel_asize;
> +
> + return status;
> +}
> +
> +void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt, unsigned long fdt_size)
> +{
> + kernel_entry_t real_kernel_entry;
> +
> + /* Config Direct Mapping */
> + csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0);
> + csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1);
> +
> + real_kernel_entry = (kernel_entry_t)
> + ((unsigned long)&kernel_entry - entrypoint + VMLINUX_LOAD_ADDRESS);
> +
> + if (!efi_novamap)
> + real_kernel_entry(true, fdt);
> + else
> + real_kernel_entry(false, fdt);
> +}
> diff --git a/include/linux/pe.h b/include/linux/pe.h
> index daf09ffffe38..1d3836ef9d92 100644
> --- a/include/linux/pe.h
> +++ b/include/linux/pe.h
> @@ -65,6 +65,8 @@
> #define IMAGE_FILE_MACHINE_SH5 0x01a8
> #define IMAGE_FILE_MACHINE_THUMB 0x01c2
> #define IMAGE_FILE_MACHINE_WCEMIPSV2 0x0169
> +#define IMAGE_FILE_MACHINE_LOONGARCH32 0x6232
> +#define IMAGE_FILE_MACHINE_LOONGARCH64 0x6264
>
> /* flags */
> #define IMAGE_FILE_RELOCS_STRIPPED 0x0001

This is looking really good now! Thanks for taking my feedback so seriously.

We will have to figure out how to queue this up, given that I intend
to queue the generic EFI zboot changes for v6.1 as well.

Next message: Joel Fernandes: "Re: [PATCH v14 4/4] Documentation: trace/objtrace: Add documentation for objtrace"
Previous message: Darrick J. Wong: "Re: [RFC PATCH v6] mm, pmem, xfs: Introduce MF_MEM_REMOVE for unbind"
In reply to: Huacai Chen: "Re: [PATCH V2] LoongArch: Add efistub booting support"
Next in thread: Huacai Chen: "Re: [PATCH V2] LoongArch: Add efistub booting support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]