[RFT PATCH v3 08/16] arm64: dts: qcom: sc7180: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'reg' is a required property
  qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 5d2dd21da79c..e8debb0da411 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -555,12 +555,6 @@ scm {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;
@@ -1462,9 +1456,10 @@ ipa: ipa@1e40000 {
 			status = "disabled";
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_regs_1: sycon@1f60000 {
-- 
2.34.1