[RFT PATCH v3 14/16] arm64: dts: qcom: sdm630: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property
  qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index a4f73be3d60a..9ae6610af93a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -697,9 +697,10 @@ tsens: thermal-sensor@10ae000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_regs_1: sycon@1f60000 {
@@ -2356,12 +2357,6 @@ intc: interrupt-controller@17a00000 {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	sound: sound {
 	};
 
-- 
2.34.1