[PATCH 5.10 197/545] drm/vc4: dsi: Fix dsi0 interrupt support
From: Greg Kroah-Hartman
Date: Fri Aug 19 2022 - 12:09:23 EST
From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
[ Upstream commit bc5b815e06f90cccdb6461aba1e49fdc2f3c8cd1 ]
DSI0 seemingly had very little or no testing as a load of
the register mappings were incorrect/missing, so host
transfers always timed out due to enabling/checking incorrect
bits in the interrupt enable and status registers.
Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220613144800.326124-16-maxime@xxxxxxxxxx
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 111 ++++++++++++++++++++++++++--------
1 file changed, 85 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 8e2d5c4237ae..43e86f0b5541 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -181,8 +181,50 @@
#define DSI0_TXPKT_PIX_FIFO 0x20 /* AKA PIX_FIFO */
-#define DSI0_INT_STAT 0x24
-#define DSI0_INT_EN 0x28
+#define DSI0_INT_STAT 0x24
+#define DSI0_INT_EN 0x28
+# define DSI0_INT_FIFO_ERR BIT(25)
+# define DSI0_INT_CMDC_DONE_MASK VC4_MASK(24, 23)
+# define DSI0_INT_CMDC_DONE_SHIFT 23
+# define DSI0_INT_CMDC_DONE_NO_REPEAT 1
+# define DSI0_INT_CMDC_DONE_REPEAT 3
+# define DSI0_INT_PHY_DIR_RTF BIT(22)
+# define DSI0_INT_PHY_D1_ULPS BIT(21)
+# define DSI0_INT_PHY_D1_STOP BIT(20)
+# define DSI0_INT_PHY_RXLPDT BIT(19)
+# define DSI0_INT_PHY_RXTRIG BIT(18)
+# define DSI0_INT_PHY_D0_ULPS BIT(17)
+# define DSI0_INT_PHY_D0_LPDT BIT(16)
+# define DSI0_INT_PHY_D0_FTR BIT(15)
+# define DSI0_INT_PHY_D0_STOP BIT(14)
+/* Signaled when the clock lane enters the given state. */
+# define DSI0_INT_PHY_CLK_ULPS BIT(13)
+# define DSI0_INT_PHY_CLK_HS BIT(12)
+# define DSI0_INT_PHY_CLK_FTR BIT(11)
+/* Signaled on timeouts */
+# define DSI0_INT_PR_TO BIT(10)
+# define DSI0_INT_TA_TO BIT(9)
+# define DSI0_INT_LPRX_TO BIT(8)
+# define DSI0_INT_HSTX_TO BIT(7)
+/* Contention on a line when trying to drive the line low */
+# define DSI0_INT_ERR_CONT_LP1 BIT(6)
+# define DSI0_INT_ERR_CONT_LP0 BIT(5)
+/* Control error: incorrect line state sequence on data lane 0. */
+# define DSI0_INT_ERR_CONTROL BIT(4)
+# define DSI0_INT_ERR_SYNC_ESC BIT(3)
+# define DSI0_INT_RX2_PKT BIT(2)
+# define DSI0_INT_RX1_PKT BIT(1)
+# define DSI0_INT_CMD_PKT BIT(0)
+
+#define DSI0_INTERRUPTS_ALWAYS_ENABLED (DSI0_INT_ERR_SYNC_ESC | \
+ DSI0_INT_ERR_CONTROL | \
+ DSI0_INT_ERR_CONT_LP0 | \
+ DSI0_INT_ERR_CONT_LP1 | \
+ DSI0_INT_HSTX_TO | \
+ DSI0_INT_LPRX_TO | \
+ DSI0_INT_TA_TO | \
+ DSI0_INT_PR_TO)
+
# define DSI1_INT_PHY_D3_ULPS BIT(30)
# define DSI1_INT_PHY_D3_STOP BIT(29)
# define DSI1_INT_PHY_D2_ULPS BIT(28)
@@ -892,6 +934,9 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
DSI_PORT_WRITE(PHY_AFEC0, afec0);
+ /* AFEC reset hold time */
+ mdelay(1);
+
DSI_PORT_WRITE(PHY_AFEC1,
VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE1) |
VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE0) |
@@ -1058,12 +1103,9 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN);
/* Bring AFE out of reset. */
- if (dsi->variant->port == 0) {
- } else {
- DSI_PORT_WRITE(PHY_AFEC0,
- DSI_PORT_READ(PHY_AFEC0) &
- ~DSI1_PHY_AFEC0_RESET);
- }
+ DSI_PORT_WRITE(PHY_AFEC0,
+ DSI_PORT_READ(PHY_AFEC0) &
+ ~DSI_PORT_BIT(PHY_AFEC0_RESET));
vc4_dsi_ulps(dsi, false);
@@ -1182,13 +1224,28 @@ static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
/* Enable the appropriate interrupt for the transfer completion. */
dsi->xfer_result = 0;
reinit_completion(&dsi->xfer_completion);
- DSI_PORT_WRITE(INT_STAT, DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF);
- if (msg->rx_len) {
- DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED |
- DSI1_INT_PHY_DIR_RTF));
+ if (dsi->variant->port == 0) {
+ DSI_PORT_WRITE(INT_STAT,
+ DSI0_INT_CMDC_DONE_MASK | DSI1_INT_PHY_DIR_RTF);
+ if (msg->rx_len) {
+ DSI_PORT_WRITE(INT_EN, (DSI0_INTERRUPTS_ALWAYS_ENABLED |
+ DSI0_INT_PHY_DIR_RTF));
+ } else {
+ DSI_PORT_WRITE(INT_EN,
+ (DSI0_INTERRUPTS_ALWAYS_ENABLED |
+ VC4_SET_FIELD(DSI0_INT_CMDC_DONE_NO_REPEAT,
+ DSI0_INT_CMDC_DONE)));
+ }
} else {
- DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED |
- DSI1_INT_TXPKT1_DONE));
+ DSI_PORT_WRITE(INT_STAT,
+ DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF);
+ if (msg->rx_len) {
+ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED |
+ DSI1_INT_PHY_DIR_RTF));
+ } else {
+ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED |
+ DSI1_INT_TXPKT1_DONE));
+ }
}
/* Send the packet. */
@@ -1205,7 +1262,7 @@ static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
ret = dsi->xfer_result;
}
- DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED);
+ DSI_PORT_WRITE(INT_EN, DSI_PORT_BIT(INTERRUPTS_ALWAYS_ENABLED));
if (ret)
goto reset_fifo_and_return;
@@ -1251,7 +1308,7 @@ static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
DSI_PORT_BIT(CTRL_RESET_FIFOS));
DSI_PORT_WRITE(TXPKT1C, 0);
- DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED);
+ DSI_PORT_WRITE(INT_EN, DSI_PORT_BIT(INTERRUPTS_ALWAYS_ENABLED));
return ret;
}
@@ -1368,26 +1425,28 @@ static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
DSI_PORT_WRITE(INT_STAT, stat);
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_ERR_SYNC_ESC, "LPDT sync");
+ DSI_PORT_BIT(INT_ERR_SYNC_ESC), "LPDT sync");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_ERR_CONTROL, "data lane 0 sequence");
+ DSI_PORT_BIT(INT_ERR_CONTROL), "data lane 0 sequence");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_ERR_CONT_LP0, "LP0 contention");
+ DSI_PORT_BIT(INT_ERR_CONT_LP0), "LP0 contention");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_ERR_CONT_LP1, "LP1 contention");
+ DSI_PORT_BIT(INT_ERR_CONT_LP1), "LP1 contention");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_HSTX_TO, "HSTX timeout");
+ DSI_PORT_BIT(INT_HSTX_TO), "HSTX timeout");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_LPRX_TO, "LPRX timeout");
+ DSI_PORT_BIT(INT_LPRX_TO), "LPRX timeout");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_TA_TO, "turnaround timeout");
+ DSI_PORT_BIT(INT_TA_TO), "turnaround timeout");
dsi_handle_error(dsi, &ret, stat,
- DSI1_INT_PR_TO, "peripheral reset timeout");
+ DSI_PORT_BIT(INT_PR_TO), "peripheral reset timeout");
- if (stat & (DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF)) {
+ if (stat & ((dsi->variant->port ? DSI1_INT_TXPKT1_DONE :
+ DSI0_INT_CMDC_DONE_MASK) |
+ DSI_PORT_BIT(INT_PHY_DIR_RTF))) {
complete(&dsi->xfer_completion);
ret = IRQ_HANDLED;
- } else if (stat & DSI1_INT_HSTX_TO) {
+ } else if (stat & DSI_PORT_BIT(INT_HSTX_TO)) {
complete(&dsi->xfer_completion);
dsi->xfer_result = -ETIMEDOUT;
ret = IRQ_HANDLED;
--
2.35.1