[PATCH v3 1/7] dt-bindings: PCI: fu740-pci: fix missing clock-names

[Conor Dooley]

From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

The commit b92225b034c0 ("dt-bindings: PCI: designware: Fix
'unevaluatedProperties' warnings") removed the clock-names property as
a requirement and from the example as it triggered unevaluatedProperty
warnings. dtbs_check was not able to pick up on this at the time, but
now can:

arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dtb: pcie@e00000000: Unevaluated properties are not allowed ('clock-names' was unexpected)
        From schema: linux/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml

The property was already in use by the FU740 DTS and the clock must be
enabled. The Linux and FreeBSD drivers require the property to enable
the clocks correctly Re-add the property and its "clocks" dependency,
while making it required.

Fixes: b92225b034c0 ("dt-bindings: PCI: designware: Fix 'unevaluatedProperties' warnings")
Fixes: 43cea116be0b ("dt-bindings: PCI: Add SiFive FU740 PCIe host controller")
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
v2022.08 of dt-schema is required.
---
 .../devicetree/bindings/pci/sifive,fu740-pcie.yaml        | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
index 195e6afeb169..844fc7142302 100644
--- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -51,6 +51,12 @@ properties:
     description: A phandle to the PCIe power up reset line.
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
   pwren-gpios:
     description: Should specify the GPIO for controlling the PCI bus device power on.
     maxItems: 1
@@ -66,6 +72,7 @@ required:
   - interrupt-map-mask
   - interrupt-map
   - clocks
+  - clock-names
   - resets
   - pwren-gpios
   - reset-gpios
@@ -104,6 +111,7 @@ examples:
                             <0x0 0x0 0x0 0x2 &plic0 58>,
                             <0x0 0x0 0x0 0x3 &plic0 59>,
                             <0x0 0x0 0x0 0x4 &plic0 60>;
+            clock-names = "pcie_aux";
             clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
             resets = <&prci 4>;
             pwren-gpios = <&gpio 5 0>;
-- 
2.37.1