[PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao]

because this function is not used. Also remove function
odm_InbandNoise_Monitor_NSeries because it is a static function
which is only called from ODM_InbandNoise_Monitor.

Signed-off-by: Nam Cao <namcaov@xxxxxxxxx>
---
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
 2 files changed, 118 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
index 392cc8a398f5..b85b323cf5bd 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
@@ -17,114 +17,3 @@
 #define Valid_Min				-35
 #define Valid_Max			10
 #define ValidCnt				5
-
-static s16 odm_InbandNoise_Monitor_NSeries(
-	struct dm_odm_t *pDM_Odm,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-)
-{
-	u32 tmp4b;
-	u8 max_rf_path = 0, rf_path;
-	u8 reg_c50, reg_c58, valid_done = 0;
-	struct noise_level noise_data;
-	u32 start  = 0;
-
-	pDM_Odm->noise_level.noise_all = 0;
-
-	max_rf_path = 1;
-
-	memset(&noise_data, 0, sizeof(struct noise_level));
-
-	/*  */
-	/*  Step 1. Disable DIG && Set initial gain. */
-	/*  */
-
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
-	/*  */
-	/*  Step 2. Disable all power save for read registers */
-	/*  */
-	/* dcmd_DebugControlPowerSave(padapter, PSDisable); */
-
-	/*  */
-	/*  Step 3. Get noise power level */
-	/*  */
-	start = jiffies;
-	while (1) {
-
-		/* Stop updating idle time pwer report (for driver read) */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
-
-		/* Read Noise Floor Report */
-		tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
-
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
-		/* if (max_rf_path == 2) */
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
-
-		/* update idle time pwer report per 5us */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
-
-		noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
-		noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
-			noise_data.sval[rf_path] /= 2;
-		}
-		/* mdelay(10); */
-		/* msleep(10); */
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
-				noise_data.valid_cnt[rf_path]++;
-				noise_data.sum[rf_path] += noise_data.sval[rf_path];
-				if (noise_data.valid_cnt[rf_path] == ValidCnt) {
-					valid_done++;
-				}
-
-			}
-
-		}
-
-		/* printk("####### valid_done:%d #############\n", valid_done); */
-		if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
-			for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-				/* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
-				if (noise_data.valid_cnt[rf_path])
-					noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
-				else
-					noise_data.sum[rf_path]  = 0;
-			}
-			break;
-		}
-	}
-	reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
-	reg_c50 &= ~BIT7;
-	pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
-	pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
-
-	if (max_rf_path == 2) {
-		reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
-		reg_c58 &= ~BIT7;
-		pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
-		pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
-	}
-	pDM_Odm->noise_level.noise_all /= max_rf_path;
-
-	/*  */
-	/*  Step 4. Recover the Dig */
-	/*  */
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
-
-	return pDM_Odm->noise_level.noise_all;
-
-}
-
-s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
-{
-	return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
-}
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
index ab114543f39c..01c5c524d4e0 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
@@ -29,11 +29,4 @@ struct odm_noise_monitor {
 	s16 noise_all;
 };
 
-s16 ODM_InbandNoise_Monitor(
-	void *pDM_VOID,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-);
-
 #endif
-- 
2.25.1