[PATCH 2/4] net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration

[Alexander Couzens]

The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.

Signed-off-by: Alexander Couzens <lynxis@xxxxxxx>
---
 drivers/net/ethernet/mediatek/mtk_sgmii.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index a01bb20ea957..782812434367 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -7,6 +7,7 @@
  *
  */
 
+#include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
 #include <linux/phylink.h>
@@ -24,6 +25,9 @@ static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
 {
 	unsigned int val;
 
+	/* PHYA power down */
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD);
+
 	/* Setup the link timer and QPHY power up inside SGMIISYS */
 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
 		     SGMII_LINK_TIMER_DEFAULT);
@@ -36,6 +40,10 @@ static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
 	val |= SGMII_AN_RESTART;
 	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
 
+	/* Release PHYA power down state
+	 * unknown how much the QPHY needs but it is racy without a sleep
+	 */
+	usleep_range(50, 100);
 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
 
 	return 0;
@@ -50,6 +58,9 @@ static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
 {
 	unsigned int val;
 
+	/* PHYA power down */
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD);
+
 	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
 	val &= ~RG_PHY_SPEED_MASK;
 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
@@ -67,7 +78,10 @@ static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
 	val |= SGMII_SPEED_1000;
 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
 
-	/* Release PHYA power down state */
+	/* Release PHYA power down state
+	 * unknown how much the QPHY needs but it is racy without a sleep
+	 */
+	usleep_range(50, 100);
 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
 
 	return 0;
-- 
2.35.1