[PATCH v4 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

This set contains a few improvements for the imx8mm-kontron devicetrees
(patch 3-7) and support for a new SoM (patch 8, including baseboard) that
complies to the Open Standard Module (OSM) 1.0 hardware specification, size S
(https://sget.org/standards/osm).

It also includes binding changes in patch 1 and 2.

Changes in v4:
* fix hex values and unit addresses in SPI NOR partition nodes
* fix SoM dtsi includes

Changes in v3:
* drop patch for 2 which was applied separately
* rebase on v6.0-rc1
* rename compatibles and file names

Changes in v2:
* move binding changes to beginning of patchset
* Allow arbitrary regulator names in PCA9450 bindings
* Use voltage rail names from schematic for PMIC regulator-names
* Add SPI NOR partition layout to devicetree
* Remove unneeded header include
* Add tags

Frieder Schrempf (8):
  dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM
    SoM/board
  dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
  arm64: dts: imx8mm-kontron: Adjust compatibles, file names and model
    strings
  arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card
    IO voltage
  arm64: dts: imx8mm-kontron: Remove low DDRC operating point
  arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for
    PMIC regulator-names
  arm64: dts: imx8mm-kontron: Add SPI NOR partition layout
  arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S

 .../devicetree/bindings/arm/fsl.yaml          |  13 +-
 arch/arm64/boot/dts/freescale/Makefile        |   3 +-
 .../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 376 ++++++++++++++++++
 ...tron-n801x-s.dts => imx8mm-kontron-bl.dts} |   9 +-
 .../dts/freescale/imx8mm-kontron-osm-s.dtsi   | 330 +++++++++++++++
 ...-n801x-som.dtsi => imx8mm-kontron-sl.dtsi} |  53 ++-
 6 files changed, 758 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
 rename arch/arm64/boot/dts/freescale/{imx8mm-kontron-n801x-s.dts => imx8mm-kontron-bl.dts} (96%)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
 rename arch/arm64/boot/dts/freescale/{imx8mm-kontron-n801x-som.dtsi => imx8mm-kontron-sl.dtsi} (87%)

-- 
2.37.2