Re: [PATCH v2 13/16] hwmon: (mr75203) add thermal coefficient properties for Moortec PVT controller

[Farber, Eliav]

On 8/18/2022 11:25 PM, Guenter Roeck wrote:
> On Wed, Aug 17, 2022 at 05:43:18AM +0000, Eliav Farber wrote:
> > Add optional "ts-coeff-g", "ts-coeff-h", "ts-coeff-cal5" and
> > "ts-coeff-j" properties to be used instead of defaults for the
> > thermal equasion.
> Vendor prefix again, and shouldn;t there be some note about the
> to-be-used defaults ?
Can you please explain why to add a vendor prefix to these properties
(and also to all other properties I added in this series)?
All the properties I added are not specific to our SOC, and any other
vendor using the same mr75203 ip block in their SOC, can also use the new
properties.

Regarding defaults, these properties are optional, so if they are absent
in device tree, the current defaults in code are used.

--
Thanks, Eliav