Re: [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116

From: Henning Schild
Date: Mon Aug 22 2022 - 09:27:21 EST

Next message: Peter Zijlstra: "Re: [PATCH 04/13] x86/cpufeatures: Add LbrExtV2 feature bit"
Previous message: weiyongjun (A): "Re: [PATCH -next] gpio: mockup: remove gpio debugfs when remove device"
Next in thread: Henning Schild: "Re: [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Am Fri, 12 Aug 2022 10:37:02 +0200
schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:

> On Thursday, August 11, 2022, Henning Schild
> <henning.schild@xxxxxxxxxxx> wrote:
>
> > Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
> > very similar to the ones from Fintek. In other subsystems they also
> > share drivers and are called a family of drivers.
> >
> > For the GPIO subsystem the only difference is that the direction
> > bit is reversed and that there is only one data bit per pin. On the
> > SuperIO level the logical device is another one.
> >
> > Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
> > ---
> > drivers/gpio/gpio-f7188x.c | 71
> > +++++++++++++++++++++++++++----------- 1 file changed, 51
> > insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
> > index 18a3147f5a42..7b05ecc611e9 100644
> > --- a/drivers/gpio/gpio-f7188x.c
> > +++ b/drivers/gpio/gpio-f7188x.c
> > @@ -1,6 +1,7 @@
> > // SPDX-License-Identifier: GPL-2.0-or-later
> > /*
> > * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882,
> > F71889 and F81866
> > + * and Nuvoton Super-I/O NCT6116D
> > *
> > * Copyright (C) 2010-2013 LaCie
> > *
> > @@ -22,13 +23,12 @@
> > #define SIO_LDSEL 0x07 /* Logical device select */
> > #define SIO_DEVID 0x20 /* Device ID (2 bytes) */
> > #define SIO_DEVREV 0x22 /* Device revision */
> > -#define SIO_MANID 0x23 /* Fintek ID (2 bytes) */
> >
> > -#define SIO_LD_GPIO 0x06 /* GPIO logical device */
> > #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O
> > */ #define SIO_LOCK_KEY 0xAA /* Key to disable
> > Super-I/O */
> >
> > -#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */
> > +#define SIO_LD_GPIO_FINTEK 0x06 /* GPIO logical device */
> > +#define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */
> > #define SIO_F71869_ID 0x0814 /* F71869 chipset ID */
> > #define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */
> > #define SIO_F71882_ID 0x0541 /* F71882 chipset ID */
> > @@ -37,7 +37,7 @@
> > #define SIO_F81866_ID 0x1010 /* F81866 chipset ID */
> > #define SIO_F81804_ID 0x1502 /* F81804 chipset ID, same
> > for f81966 */
> > #define SIO_F81865_ID 0x0704 /* F81865 chipset ID */
> > -
>
>
>
> Logical split by leaving blank line here is good to have.

Already discussed those bits and changed them. There will be another
round because i will re-introduce the vendor ID check. Let us see what
that will do to those defines.

But i will give Simon the last call here.

>
>
> > +#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset
> > ID */
> >
> > enum chips {
> > f71869,
> > @@ -48,6 +48,7 @@ enum chips {
> > f81866,
> > f81804,
> > f81865,
> > + nct6116d,
> > };
> >
> > static const char * const f7188x_names[] = {
> > @@ -59,10 +60,12 @@ static const char * const f7188x_names[] = {
> > "f81866",
> > "f81804",
> > "f81865",
> > + "nct6116d",
> > };
> >
> > struct f7188x_sio {
> > int addr;
> > + int device;
> > enum chips type;
> > };
> >
> > @@ -170,6 +173,9 @@ static int f7188x_gpio_set_config(struct
> > gpio_chip *chip, unsigned offset,
> > /* Output mode register (0:open drain 1:push-pull). */
> > #define gpio_out_mode(base) (base + 3)
> >
> > +#define gpio_dir_invert(type) ((type) == nct6116d)
> > +#define gpio_data_single(type) ((type) == nct6116d)
>
>
>
> I think with namespace prefix it should be fine, otherwise it might
> be a renaming burden in the future.
>
> Also I would rather see them static inline one-liners, so compiler
> will perform a type check.
>

Simon already acked that. The additional code is in line with other
code already in that file. So while your suggestion is valid and i also
wondered why it was defines instead of inline functions, i will leave
it like that for consistency reasons.

Henning

> > static struct f7188x_gpio_bank f71869_gpio_bank[] = {
> > F7188X_GPIO_BANK(0, 6, 0xF0),
> > F7188X_GPIO_BANK(10, 8, 0xE0),
> > @@ -254,6 +260,17 @@ static struct f7188x_gpio_bank
> > f81865_gpio_bank[] = { F7188X_GPIO_BANK(60, 5, 0x90),
> > };
> >
> > +static struct f7188x_gpio_bank nct6116d_gpio_bank[] = {
> > + F7188X_GPIO_BANK(0, 8, 0xE0),
> > + F7188X_GPIO_BANK(10, 8, 0xE4),
> > + F7188X_GPIO_BANK(20, 8, 0xE8),
> > + F7188X_GPIO_BANK(30, 8, 0xEC),
> > + F7188X_GPIO_BANK(40, 8, 0xF0),
> > + F7188X_GPIO_BANK(50, 8, 0xF4),
> > + F7188X_GPIO_BANK(60, 8, 0xF8),
> > + F7188X_GPIO_BANK(70, 1, 0xFC),
> > +};
> > +
> > static int f7188x_gpio_get_direction(struct gpio_chip *chip,
> > unsigned offset)
> > {
> > int err;
> > @@ -264,13 +281,16 @@ static int f7188x_gpio_get_direction(struct
> > gpio_chip *chip, unsigned offset)
> > err = superio_enter(sio->addr);
> > if (err)
> > return err;
> > - superio_select(sio->addr, SIO_LD_GPIO);
> > + superio_select(sio->addr, sio->device);
> >
> > dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> >
> > superio_exit(sio->addr);
> >
> > - if (dir & 1 << offset)
> > + if (gpio_dir_invert(sio->type))
> > + dir = ~dir;
> > +
> > + if (dir & BIT(offset))
> > return GPIO_LINE_DIRECTION_OUT;
> >
> > return GPIO_LINE_DIRECTION_IN;
> > @@ -286,10 +306,14 @@ static int f7188x_gpio_direction_in(struct
> > gpio_chip *chip, unsigned offset)
> > err = superio_enter(sio->addr);
> > if (err)
> > return err;
> > - superio_select(sio->addr, SIO_LD_GPIO);
> > + superio_select(sio->addr, sio->device);
> >
> > dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> > - dir &= ~BIT(offset);
> > +
> > + if (gpio_dir_invert(sio->type))
> > + dir |= BIT(offset);
> > + else
> > + dir &= ~BIT(offset);
> > superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
> >
> > superio_exit(sio->addr);
> > @@ -307,11 +331,11 @@ static int f7188x_gpio_get(struct gpio_chip
> > *chip, unsigned offset)
> > err = superio_enter(sio->addr);
> > if (err)
> > return err;
> > - superio_select(sio->addr, SIO_LD_GPIO);
> > + superio_select(sio->addr, sio->device);
> >
> > dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> > dir = !!(dir & BIT(offset));
> > - if (dir)
> > + if (gpio_data_single(sio->type) || dir)
> > data = superio_inb(sio->addr,
> > gpio_data_out(bank->regbase));
> > else
> > data = superio_inb(sio->addr,
> > gpio_data_in(bank->regbase)); @@ -332,7 +356,7 @@ static int
> > f7188x_gpio_direction_out(struct gpio_chip *chip,
> > err = superio_enter(sio->addr);
> > if (err)
> > return err;
> > - superio_select(sio->addr, SIO_LD_GPIO);
> > + superio_select(sio->addr, sio->device);
> >
> > data_out = superio_inb(sio->addr,
> > gpio_data_out(bank->regbase)); if (value)
> > @@ -342,7 +366,10 @@ static int f7188x_gpio_direction_out(struct
> > gpio_chip *chip,
> > superio_outb(sio->addr, gpio_data_out(bank->regbase),
> > data_out);
> >
> > dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
> > - dir |= BIT(offset);
> > + if (gpio_dir_invert(sio->type))
> > + dir &= ~BIT(offset);
> > + else
> > + dir |= BIT(offset);
> > superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
> >
> > superio_exit(sio->addr);
> > @@ -360,7 +387,7 @@ static void f7188x_gpio_set(struct gpio_chip
> > *chip, unsigned offset, int value)
> > err = superio_enter(sio->addr);
> > if (err)
> > return;
> > - superio_select(sio->addr, SIO_LD_GPIO);
> > + superio_select(sio->addr, sio->device);
> >
> > data_out = superio_inb(sio->addr,
> > gpio_data_out(bank->regbase)); if (value)
> > @@ -388,7 +415,7 @@ static int f7188x_gpio_set_config(struct
> > gpio_chip *chip, unsigned offset,
> > err = superio_enter(sio->addr);
> > if (err)
> > return err;
> > - superio_select(sio->addr, SIO_LD_GPIO);
> > + superio_select(sio->addr, sio->device);
> >
> > data = superio_inb(sio->addr, gpio_out_mode(bank->regbase));
> > if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
> > @@ -449,6 +476,10 @@ static int f7188x_gpio_probe(struct
> > platform_device *pdev)
> > data->nr_bank = ARRAY_SIZE(f81865_gpio_bank);
> > data->bank = f81865_gpio_bank;
> > break;
> > + case nct6116d:
> > + data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank);
> > + data->bank = nct6116d_gpio_bank;
> > + break;
> > default:
> > return -ENODEV;
> > }
> > @@ -485,12 +516,8 @@ static int __init f7188x_find(int addr, struct
> > f7188x_sio *sio)
> > return err;
> >
> > err = -ENODEV;
> > - devid = superio_inw(addr, SIO_MANID);
> > - if (devid != SIO_FINTEK_ID) {
> > - pr_debug(DRVNAME ": Not a Fintek device at
> > 0x%08x\n", addr);
> > - goto err;
> > - }
> >
> > + sio->device = SIO_LD_GPIO_FINTEK;
> > devid = superio_inw(addr, SIO_DEVID);
> > switch (devid) {
> > case SIO_F71869_ID:
> > @@ -517,8 +544,12 @@ static int __init f7188x_find(int addr, struct
> > f7188x_sio *sio)
> > case SIO_F81865_ID:
> > sio->type = f81865;
> > break;
> > + case SIO_NCT6116D_ID:
> > + sio->device = SIO_LD_GPIO_NUVOTON;
> > + sio->type = nct6116d;
> > + break;
> > default:
> > - pr_info(DRVNAME ": Unsupported Fintek device
> > 0x%04x\n", devid);
> > + pr_info(DRVNAME ": Unsupported device 0x%04x\n",
> > devid); goto err;
> > }
> > sio->addr = addr;
> > --
> > 2.35.1
> >
> >
>

Next message: Peter Zijlstra: "Re: [PATCH 04/13] x86/cpufeatures: Add LbrExtV2 feature bit"
Previous message: weiyongjun (A): "Re: [PATCH -next] gpio: mockup: remove gpio debugfs when remove device"
Next in thread: Henning Schild: "Re: [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]