[PATCH v5 09/20] dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties
From: Serge Semin
Date: Mon Aug 22 2022 - 14:49:55 EST
Currently the 'interrupts' and 'interrupt-names' are defined being too
generic to really describe any actual IRQ interface. Moreover the DW PCIe
End-point devices are left with no IRQ signals. All of that can be fixed
by adding the IRQ-related properties to the common DW PCIe DT-schema and
defining a common and device-specific set of the IRQ names in accordance
with the hardware reference manual. Seeing there are common and dedicated
IRQ signals for DW PCIe Root Port and End-point controllers we suggest to
split the IRQ names up into two sets: common definitions available in the
snps,dw-pcie-common.yaml schema and Root Port specific names defined in
the snps,dw-pcie.yaml schema. The former one will be applied to both DW
PCIe RP and EP controllers, while the later one - for the RP only.
Note since there are DW PCI-based vendor-specific DT-bindings with the
custom names assigned to the same IRQ resources we have no much choice but
to add them to the generic DT-schemas in order to have the schemas being
applicable for such devices. Let's mark these names as deprecated so not
to encourage the new DT-bindings to use them.
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
Changelog v3:
- This is a new patch unpinned from the next one:
https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/
by the Rob' request. (@Rob)
Changelog v5:
- Add platform-specific interrupt names, but mark them as deprecated.
---
.../bindings/pci/snps,dw-pcie-common.yaml | 51 ++++++++++++++
.../bindings/pci/snps,dw-pcie-ep.yaml | 17 +++++
.../devicetree/bindings/pci/snps,dw-pcie.yaml | 67 ++++++++++++++++++-
3 files changed, 132 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
index 5fc704138677..1b0ed8f4db6c 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -17,6 +17,25 @@ description:
select: false
properties:
+ interrupts:
+ description:
+ There are two main sub-blocks which are normally capable of
+ generating interrupts. It's System Information Interface and MSI
+ interface. While the former one has some common for the Host and
+ Endpoint controllers IRQ-signals, the later interface is obviously
+ Root Complex specific since it's responsible for the incoming MSI
+ messages signalling. The System Information IRQ signals are mainly
+ responsible for reporting the generic PCIe hierarchy and Root
+ Complex events like VPD IO request, general AER, PME, Hot-plug, link
+ bandwidth change, link equalization request, INTx asserted/deasserted
+ Message detection, embedded DMA Tx/Rx/Error.
+ minItems: 1
+ maxItems: 26
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 26
+
phys:
description:
There can be up to the number of possible lanes PHYs specified placed in
@@ -95,4 +114,36 @@ properties:
additionalProperties: true
+definitions:
+ interrupt-names:
+ description:
+ IRQ signal names common for the DWC PCIe Root Port and Endpoint
+ controllers.
+ oneOf:
+ - description:
+ Controller request to read or write virtual product data
+ from/to the VPD capability registers.
+ const: vpd
+ - description:
+ Link Equalization Request flag is set in the Link Status 2
+ register (applicable if the corresponding IRQ is enabled in
+ the Link Control 3 register).
+ const: l_eq
+ - description:
+ Indicates that the eDMA Tx/Rx transfer is complete or that an
+ error has occurred on the corresponding channel. eDMA can have
+ eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+ to 16 IRQ signals all together. Write eDMA channels shall go
+ first in the ordered row as per default edma_int[*] bus setup.
+ pattern: '^dma([0-9]|1[0-5])?$'
+ - description:
+ PCIe protocol correctable error or a Data Path protection
+ correctable error is detected by the automotive/safety
+ feature.
+ const: sft_ce
+ - description:
+ Indicates that the internal safety mechanism detected and
+ uncorrectable error.
+ const: sft_ue
+
...
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index 71dd19ae1060..a9e77339c3ff 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -41,6 +41,20 @@ properties:
items:
enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
+ interrupts:
+ description:
+ There is no mandatory IRQ signals for the normal controller functioning,
+ but in addition to the native set the platforms may have a link- or
+ PM-related IRQs specified.
+ minItems: 1
+ maxItems: 20
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 20
+ items:
+ $ref: /schemas/pci/snps,dw-pcie-common.yaml#/definitions/interrupt-names
+
max-functions:
maximum: 32
@@ -60,6 +74,9 @@ examples:
<0xd0000000 0x2000000>; /* Configuration space */
reg-names = "dbi", "dbi2", "addr_space";
+ interrupts = <23>, <24>;
+ interrupt-names = "dma0", "dma1";
+
phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 85861b71d9ff..3e46f74a591a 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -42,9 +42,27 @@ properties:
enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
parf, cfg, link, ulreg, smu, mpu, apb, phy ]
- interrupts: true
-
- interrupt-names: true
+ interrupts:
+ description:
+ At least MSI interrupt signal is supposed to be specified for
+ the DWC PCIe host controller.
+ minItems: 1
+ maxItems: 26
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 26
+ items:
+ oneOf:
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#/definitions/interrupt-names
+ - $ref: '#/definitions/interrupt-names'
+ - deprecated: true
+ oneOf:
+ - description: See native "msi" IRQ for details
+ enum: [ intr ]
+ allOf:
+ - contains:
+ const: msi
clocks: true
@@ -55,6 +73,48 @@ required:
- reg
- reg-names
+definitions:
+ interrupt-names:
+ description:
+ DWC PCIe Root Port/Complex specific IRQ signal names.
+ oneOf:
+ - description:
+ DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+ no more MSI interrupt pending. The interrupt is relevant to the
+ iMSI-RX - Integrated MSI Receiver (AXI bridge).
+ const: msi
+ - description:
+ Legacy A/B/C/D interrupt signal. Basically it's triggered by
+ receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+ from the downstream device.
+ pattern: "^int(a|b|c|d)$"
+ - description:
+ Error condition detected and a bit is set in the Root Error Status
+ register of the AER capability. It's asserted when the RC
+ internally generated an error or an error message is received by
+ the RC.
+ const: aer
+ - description:
+ PME message is received by the port. That means having the PME
+ status bit set in the Root Status register (the event is
+ supposed to be unmasked in the Root Control register).
+ const: pme
+ - description:
+ Hot-plug event is detected. That is a bit has been set in the
+ Slot Status register and the corresponding event is enabled in
+ the Slot Control register.
+ const: hp
+ - description:
+ Link Autonomous Bandwidth Status flag has been set in the Link
+ Status register (the event is supposed to be unmasked in the
+ Link Control register).
+ const: bw_au
+ - description:
+ Bandwidth Management Status flag has been set in the Link
+ Status register (the event is supposed to be unmasked in the
+ Link Control register).
+ const: bw_mg
+
examples:
- |
pcie@dfc00000 {
@@ -70,6 +130,7 @@ examples:
bus-range = <0x0 0xff>;
interrupts = <25>, <24>;
+ interrupt-names = "msi", "hp";
#interrupt-cells = <1>;
reset-gpios = <&port0 0 1>;
--
2.35.1