[PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML

[Colin Foster]

Convert the phy-ocelot-serdes device tree binding to the new YAML format.

Additionally, add the file to MAINTAINERS since the original file didn't
exist.

Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
---
 .../bindings/phy/phy-ocelot-serdes.txt        | 43 -------------
 .../bindings/phy/phy-ocelot-serdes.yaml       | 61 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 3 files changed, 62 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
deleted file mode 100644
index 332219860187..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Microsemi Ocelot SerDes muxing driver
--------------------------------------
-
-On Microsemi Ocelot, there is a handful of registers in HSIO address
-space for setting up the SerDes to switch port muxing.
-
-A SerDes X can be "muxed" to work with switch port Y or Z for example.
-One specific SerDes can also be used as a PCIe interface.
-
-Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
-
-There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
-half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
-10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
-
-Also, SERDES6G number (aka "macro") 0 is the only interface supporting
-QSGMII.
-
-This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
-Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
-
-Required properties:
-
-- compatible: should be "mscc,vsc7514-serdes"
-- #phy-cells : from the generic phy bindings, must be 2.
-	       The first number defines the input port to use for a given
-	       SerDes macro. The second defines the macro to use. They are
-	       defined in dt-bindings/phy/phy-ocelot-serdes.h
-
-Example:
-
-	serdes: serdes {
-		compatible = "mscc,vsc7514-serdes";
-		#phy-cells = <2>;
-	};
-
-	ethernet {
-		port1 {
-			phy-handle = <&phy_foo>;
-			/* Link SERDES1G_5 to port1 */
-			phys = <&serdes 1 SERDES1G_5>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
new file mode 100644
index 000000000000..0666974d886a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-ocelot-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot SerDes muxing driver
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
+  - UNGLinuxDriver@xxxxxxxxxxxxx
+
+description: |
+  On Microsemi Ocelot, there is a handful of registers in HSIO address
+  space for setting up the SerDes to switch port muxing.
+
+  A SerDes X can be "muxed" to work with switch port Y or Z for example.
+  One specific SerDes can also be used as a PCIe interface.
+
+  Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
+
+  There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
+  half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
+  10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
+
+  Also, SERDES6G number (aka "macro") 0 is the only interface supporting
+  QSGMII.
+
+  This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
+  Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7514-serdes
+  "#phy-cells":
+    const: 2
+    description: |
+      from the generic phy bindings, must be 2. The first number
+      defines the input port to use for a given SerDes macro. The
+      second defines the macro to use. They are defined in
+      dt-bindings/phy/phy-ocelot-serdes.h
+
+required:
+  - compatible
+  - "#phy-cells"
+
+examlpes:
+  - |
+    serdes: serdes {
+      compatible = "mscc,vsc7514-serdes";
+      #phy-cells = <2>;
+    };
+
+    ethernet {
+      port1 {
+        phy-handle = <&phy_foo>;
+        /* Link SERDES1G_5 to port1 */
+        phys = <&serdes 1 SERDES1G_5>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 714fd8b45e5a..10dd3c6ad6ad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13481,6 +13481,7 @@ M:	UNGLinuxDriver@xxxxxxxxxxxxx
 L:	linux-mips@xxxxxxxxxxxxxxx
 S:	Supported
 F:	Documentation/devicetree/bindings/mips/mscc.txt
+F:	Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
 F:	Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
 F:	Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
 F:	arch/mips/boot/dts/mscc/
-- 
2.25.1