[PATCH 5.15 145/244] i2c: imx: Make sure to unregister adapter on remove()

From: Greg Kroah-Hartman
Date: Tue Aug 23 2022 - 06:14:15 EST


From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

commit d98bdd3a5b50446d8e010be5b04ce81c4eabf728 upstream.

If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-imx.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1487,9 +1487,7 @@ static int i2c_imx_remove(struct platfor
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
int irq, ret;

- ret = pm_runtime_resume_and_get(&pdev->dev);
- if (ret < 0)
- return ret;
+ ret = pm_runtime_get_sync(&pdev->dev);

/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -1498,17 +1496,21 @@ static int i2c_imx_remove(struct platfor
if (i2c_imx->dma)
i2c_imx_dma_free(i2c_imx);

- /* setup chip registers to defaults */
- imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
- imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
- imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
- imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+ if (ret == 0) {
+ /* setup chip registers to defaults */
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+ clk_disable(i2c_imx->clk);
+ }

clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
irq = platform_get_irq(pdev, 0);
if (irq >= 0)
free_irq(irq, i2c_imx);
- clk_disable_unprepare(i2c_imx->clk);
+
+ clk_unprepare(i2c_imx->clk);

pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);