[PATCH 4.19 068/287] ath10k: do not enforce interrupt trigger type

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

[ Upstream commit 1ee6c5abebd3cacf2ac4378d0ed4f57fd4850421 ]

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge rising - but instead rely on Devicetree to configure it.

All Qualcomm DTSI with WCN3990 define the interrupt type as level high,
so the mismatch between DTSI and driver causes rebind issues:

  $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind
  $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind
  [   44.763114] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000!
  [   44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index 0 not found
  [   44.763140] ath10k_snoc 18800000.wifi: failed to initialize resource: -6

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.0.c8-00009-QCAHLSWSC8180XMTPLZ-1
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1

Fixes: c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Tested-by: Steev Klimaszewski <steev@xxxxxxxx>
Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220513151516.357549-1-krzysztof.kozlowski@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 241e6f0e1dfe..4489875fc87b 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -879,13 +879,12 @@ static void ath10k_snoc_init_napi(struct ath10k *ar)
 static int ath10k_snoc_request_irq(struct ath10k *ar)
 {
 	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
-	int irqflags = IRQF_TRIGGER_RISING;
 	int ret, id;
 
 	for (id = 0; id < CE_COUNT_MAX; id++) {
 		ret = request_irq(ar_snoc->ce_irqs[id].irq_line,
-				  ath10k_snoc_per_engine_handler,
-				  irqflags, ce_name[id], ar);
+				  ath10k_snoc_per_engine_handler, 0,
+				  ce_name[id], ar);
 		if (ret) {
 			ath10k_err(ar,
 				   "failed to register IRQ handler for CE %d: %d",
-- 
2.35.1