Re: [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116

[Henning Schild]

Am Fri, 12 Aug 2022 13:22:04 +0200
schrieb simon.guinot@xxxxxxxxxxxx:

> On Fri, Aug 12, 2022 at 12:23:12PM +0200, Henning Schild wrote:
> > Am Fri, 12 Aug 2022 10:43:03 +0200
> > schrieb simon.guinot@xxxxxxxxxxxx:
> >   
> > > On Thu, Aug 11, 2022 at 05:39:05PM +0200, Henning Schild wrote:  
> > > > Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO
> > > > chips are very similar to the ones from Fintek. In other
> > > > subsystems they also share drivers and are called a family of
> > > > drivers.
> > > > 
> > > > For the GPIO subsystem the only difference is that the direction
> > > > bit is reversed and that there is only one data bit per pin. On
> > > > the SuperIO level the logical device is another one.
> > > > 
> > > > Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
> > > > ---
> > > >  drivers/gpio/gpio-f7188x.c | 71
> > > > +++++++++++++++++++++++++++----------- 1 file changed, 51
> > > > insertions(+), 20 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpio/gpio-f7188x.c
> > > > b/drivers/gpio/gpio-f7188x.c index 18a3147f5a42..7b05ecc611e9
> > > > 100644 --- a/drivers/gpio/gpio-f7188x.c
> > > > +++ b/drivers/gpio/gpio-f7188x.c
> > > > @@ -1,6 +1,7 @@
> > > >  // SPDX-License-Identifier: GPL-2.0-or-later
> > > >  /*
> > > >   * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882,
> > > > F71889 and F81866
> > > > + * and Nuvoton Super-I/O NCT6116D
> > > >   *
> > > >   * Copyright (C) 2010-2013 LaCie
> > > >   *
> > > > @@ -22,13 +23,12 @@
> > > >  #define SIO_LDSEL		0x07	/* Logical device
> > > > select */ #define SIO_DEVID		0x20	/*
> > > > Device ID (2 bytes) */ #define SIO_DEVREV
> > > > 0x22	/* Device revision */ -#define SIO_MANID
> > > > 	0x23	/* Fintek ID (2 bytes) */ 
> > > > -#define SIO_LD_GPIO		0x06	/* GPIO logical
> > > > device */ #define SIO_UNLOCK_KEY		0x87	/*
> > > > Key to enable Super-I/O */ #define SIO_LOCK_KEY
> > > > 0xAA	/* Key to disable Super-I/O */ 
> > > > -#define SIO_FINTEK_ID		0x1934	/*
> > > > Manufacturer ID */ +#define SIO_LD_GPIO_FINTEK
> > > > 0x06	/* GPIO logical device */ +#define
> > > > SIO_LD_GPIO_NUVOTON	0x07 /* GPIO logical device */    
> > > 
> > > Please indulge me and add a new line here.  
> > 
> > Mhh ... how about you write exactly how you would like to have that
> > define block. So we do not have taste issues in the next round.  
> 
> Sure. Considering the manufacturer IDs you have to keep and add, I
> would go with your original approach (i.e. a section per
> manufacturer). But I would add extra new lines and comments and use a
> sligthly different namming for the LD_GPIO definitions.
> 
> /*
>  * Super-I/O registers
>  */
> #define SIO_LDSEL               0x07    /* Logical device select */
> #define SIO_DEVID               0x20    /* Device ID (2 bytes) */
> #define SIO_DEVREV              0x22    /* Device revision */
> #define SIO_MANID               0x23    /* Fintek ID (2 bytes) */
> 
> #define SIO_UNLOCK_KEY          0x87    /* Key to enable Super-I/O */
> #define SIO_LOCK_KEY            0xAA    /* Key to disable Super-I/O */
> 
> /*
>  * Fintek devices.
>  */
> #define SIO_FINTEK_ID           0x1934  /* Manufacturer ID */
> 
> #define SIO_F71869_ID           0x0814  /* F71869 chipset ID */
> #define SIO_F71869A_ID          0x1007  /* F71869A chipset ID */
> #define SIO_F71882_ID           0x0541  /* F71882 chipset ID */
> #define SIO_F71889_ID           0x0909  /* F71889 chipset ID */
> #define SIO_F71889A_ID          0x1005  /* F71889A chipset ID */
> #define SIO_F81866_ID           0x1010  /* F81866 chipset ID */
> #define SIO_F81804_ID           0x1502  /* F81804 chipset ID, same for
> 					   f81966 */ 
> #define SIO_F81865_ID           0x0704  /* F81865 chipset ID */
> 
> #define SIO_FINTEK_LD_GPIO      0x06    /* GPIO logical device */
> 
> /*
>  * Nuvoton devices.
>  */
> #define SIO_NUVOTON_ID          0xXXXX  /* Manufacturer ID */
> 
> #define SIO_NCT6116D_ID         0xD283  /* NCT6116D chipset ID */
> 
> #define SIO_NUVOTON_LD_GPIO     0x07    /* GPIO logical device */
> 
> Please, note it is not only a matter of taste. New lines and comments
> are really helping the reader. Also, note that I am not asking for
> this change, only suggesting it.

This is fine. I will take this. Only slight difference will be in the
revid and manid, those are Fintek specific and do not apply for Nuvoton.

regards,
Henning

> >   
> > > >  #define SIO_F71869_ID		0x0814	/* F71869
> > > > chipset ID */ #define SIO_F71869A_ID		0x1007
> > > > /* F71869A chipset ID */ #define SIO_F71882_ID
> > > > 0x0541	/* F71882 chipset ID */ @@ -37,7 +37,7 @@
> > > >  #define SIO_F81866_ID		0x1010	/* F81866
> > > > chipset ID */ #define SIO_F81804_ID		0x1502  /*
> > > > F81804 chipset ID, same for f81966 */ #define SIO_F81865_ID
> > > > 	0x0704	/* F81865 chipset ID */ -
> > > > +#define SIO_NCT6116D_ID		0xD283  /* NCT6116D
> > > > chipset ID */   
> > > 
> > > ... snip ...
> > >   
> > > > @@ -485,12 +516,8 @@ static int __init f7188x_find(int addr,
> > > > struct f7188x_sio *sio) return err;
> > > >  
> > > >  	err = -ENODEV;
> > > > -	devid = superio_inw(addr, SIO_MANID);
> > > > -	if (devid != SIO_FINTEK_ID) {
> > > > -		pr_debug(DRVNAME ": Not a Fintek device at
> > > > 0x%08x\n", addr);
> > > > -		goto err;
> > > > -	}    
> > > 
> > > Sorry for missing that at my first review. You can't remove this
> > > block of code. This driver is poking around on the I2C bus, which
> > > is not great. So we want to make sure as much as possible that we
> > > are speaking to the right device.  
> > 
> > Ok fair enough, we can make that more conservative and match the two
> > manufacturers and also make sure that not one can bring a chip id
> > that the other one uses for another chip.
> > A v4 is coming earliest in 1.5 weeks.  
> 
> Great. Thanks for your patience.
> 
> Simon