Re: [PATCH v1 1/1] dt-bindings: phy: ocelot-serdes: convert to YAML

[Colin Foster]

Hi Krzysztof,

Thanks for the feedback! I'll make these changes for v2. I'm out next
week and don't want to send-and-run, so it might be the following week
when I get around to it.

On Tue, Aug 23, 2022 at 11:36:29AM +0300, Krzysztof Kozlowski wrote:
> On 23/08/2022 09:00, Colin Foster wrote:
> > Convert the phy-ocelot-serdes device tree binding to the new YAML format.
> > 
> > Additionally, add the file to MAINTAINERS since the original file didn't
> > exist.
> > 
> > Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
> > ---
> >  .../bindings/phy/phy-ocelot-serdes.txt        | 43 -------------
> >  .../bindings/phy/phy-ocelot-serdes.yaml       | 61 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  3 files changed, 62 insertions(+), 43 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
> >  create mode 100644 Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
> 
> Filename based on compatible, so
> mscc,vsc7514-serdes.yaml
> 
> > 
> 
> 
> > diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
> > new file mode 100644
> > index 000000000000..0666974d886a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/phy-ocelot-serdes.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Microsemi Ocelot SerDes muxing driver
> 
> s/driver//
> 
> Bindings are for hardware, not for Linux drivers.
> 
> > +
> > +maintainers:
> > +  - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> > +  - UNGLinuxDriver@xxxxxxxxxxxxx
> > +
> > +description: |
> > +  On Microsemi Ocelot, there is a handful of registers in HSIO address
> > +  space for setting up the SerDes to switch port muxing.
> > +
> > +  A SerDes X can be "muxed" to work with switch port Y or Z for example.
> > +  One specific SerDes can also be used as a PCIe interface.
> > +
> > +  Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
> > +
> > +  There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
> > +  half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
> > +  10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
> > +
> > +  Also, SERDES6G number (aka "macro") 0 is the only interface supporting
> > +  QSGMII.
> > +
> > +  This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
> > +  Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - mscc,vsc7514-serdes
> 
> Missing blank line
> 
> > +  "#phy-cells":
> > +    const: 2
> > +    description: |
> > +      from the generic phy bindings, must be 2. 
> 
> Skip first sentence, it's obvious.
> 
> The first number
> > +      defines the input port to use for a given SerDes macro. The
> > +      second defines the macro to use. They are defined in
> > +      dt-bindings/phy/phy-ocelot-serdes.h
> > +
> > +required:
> > +  - compatible
> > +  - "#phy-cells"
> 
> Missing additionalProperties: false
> 
> Base your YAML on example-schema.
> 
> > +
> > +examlpes:
> 
> Typo.
> 
> 
> > +  - |
> > +    serdes: serdes {
> > +      compatible = "mscc,vsc7514-serdes";
> > +      #phy-cells = <2>;
> > +    };
> > +
> > +    ethernet {
> > +      port1 {
> > +        phy-handle = <&phy_foo>;
> > +        /* Link SERDES1G_5 to port1 */
> > +        phys = <&serdes 1 SERDES1G_5>;
> > +      };
> > +    };
> 
> Skip consumer examples in provider bindings. They're obvious.
> 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 714fd8b45e5a..10dd3c6ad6ad 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -13481,6 +13481,7 @@ M:	UNGLinuxDriver@xxxxxxxxxxxxx
> >  L:	linux-mips@xxxxxxxxxxxxxxx
> >  S:	Supported
> >  F:	Documentation/devicetree/bindings/mips/mscc.txt
> > +F:	Documentation/devicetree/bindings/phy/phy-ocelot-serdes.yaml
> >  F:	Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> >  F:	Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> >  F:	arch/mips/boot/dts/mscc/
> 
> 
> Best regards,
> Krzysztof