Re: [PATCH v3 0/4] Add support for tsens controller reinit via trustzone

[Bhupesh Sharma]

On 8/4/22 11:16 AM, Bhupesh Sharma wrote:
> Changes since v2:
> -----------------
> - v2 can be viewed here: https://lore.kernel.org/linux-arm-msm/20220724122424.2509021-1-bhupesh.sharma@xxxxxxxxxx/
> - Dropped sm6375 specific patch from v3, as suggested by Konrad.
> - Rebased on latest linux-next (master branch) tip.
>
> Changes since v1:
> -----------------
> - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20220701145815.2037993-1-bhupesh.sharma@xxxxxxxxxx/
> - Addressed several comments from Bjorn regarding locking, serialization
>    etc received on v1.
> - Addressed Konrad's concerns about the tsens controller found on sm6375
>    SoC which seems to start in a bad state or is disabled when entering
>    the linux world.
> - This series would depend on sm6375 tsens controller changes being
>    added by Konrad. It is based on linux-next (master branch) tip.
>
> Some versions of Qualcomm tsens controller might enter a
> 'bad state' causing sensor temperatures/interrupts status
> to be in an 'invalid' state.
>
> It is recommended to re-initialize the tsens controller
> via trustzone (secure registers) using scm call(s) when that
> happens.
>
> This patchset adds the support for the same.
>
> Cc: bjorn.andersson@xxxxxxxxxx
> Cc: Amit Kucheria <amitk@xxxxxxxxxx>
> Cc: Thara Gopinath <thara.gopinath@xxxxxxxxx>
> Cc: linux-pm@xxxxxxxxxxxxxxx
> Cc: linux-arm-msm@xxxxxxxxxxxxxxx
>
> Bhupesh Sharma (4):
>    firmware: qcom: scm: Add support for tsens reinit workaround
>    thermal: qcom: tsens: Add hooks for supplying platform specific reinit
>      quirks
>    thermal: qcom: tsens: Add driver support for re-initialization quirk
>    thermal: qcom: tsens: Add reinit quirk support for tsens v2
>      controllers
>
>   drivers/firmware/qcom_scm.c     |  15 +++
>   drivers/firmware/qcom_scm.h     |   4 +
>   drivers/thermal/qcom/tsens-v2.c |  15 +++
>   drivers/thermal/qcom/tsens.c    | 200 ++++++++++++++++++++++++++++++++
>   drivers/thermal/qcom/tsens.h    |  18 ++-
>   include/linux/qcom_scm.h        |   2 +
>   6 files changed, 253 insertions(+), 1 deletion(-)

Gentle ping.

Thanks,
Bhupesh