Re: [PATCH v2] usb: ehci: Use endpoint in URB to get maxpacket

[Alan Stern]

On Thu, Aug 25, 2022 at 01:38:13AM +0600, Khalid Masum wrote:
> usb_maxpacket() looks up the endpoint number in the pipe which can fail
> if the interface or configuration changes before the routine is called.
> This is unexpected and may even cause a modulo by zero afterwards.
> 
> So use usb_endpoint_maxp() routine which uses the endpoint stored in URB
> to get the maxpacket.
> 
> Addresses-Coverity: 744857 ("Division or modulo by zero")
> Addresses-Coverity: 1487371 ("Division or modulo by zero")
> Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Khalid Masum <khalid.masum.92@xxxxxxxxx>
> ---
> Changes since v1:
>  - Update commit description
>  - Use usb_endpoint_maxp() instead of checking whether getting maxpacket
>    failed
>  - Link: https://lore.kernel.org/lkml/20220823182758.13401-1-khalid.masum.92@xxxxxxxxx/
> 
>  drivers/usb/host/ehci-q.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
> index 807e64991e3e..666f5c4db25a 100644
> --- a/drivers/usb/host/ehci-q.c
> +++ b/drivers/usb/host/ehci-q.c
> @@ -645,7 +645,7 @@ qh_urb_transaction (
>  		token |= (1 /* "in" */ << 8);
>  	/* else it's already initted to "out" pid (0 << 8) */
>  
> -	maxpacket = usb_maxpacket(urb->dev, urb->pipe);
> +	maxpacket = usb_endpoint_maxp(&urb->ep->desc);
>  
>  	/*
>  	 * buffer gets wrapped in one or more qtds;
> @@ -1218,7 +1218,7 @@ static int ehci_submit_single_step_set_feature(
>  
>  	token |= (1 /* "in" */ << 8);  /*This is IN stage*/
>  
> -	maxpacket = usb_maxpacket(urb->dev, urb->pipe);
> +	maxpacket = usb_endpoint_maxp(&urb->ep->desc);
>  
>  	qtd_fill(ehci, qtd, buf, len, token, maxpacket);

Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>